Only show results in Connecticut? Ok

Forestry Thinning equipment for Forestry

  • Model HSM 208F 9 t - Forwarder

    The classic 'cut-to-length forwarder' in many respects. Designed with no compromises for short tree types, HSM 208F 9t is the ideal forwarding tool for forest thinning. With an Epsilon crane as standard and a loading rack for 2 x 2.5m or 5m timber, the HSM 208F 9t is engineered perfectly for the task. Performance reserves are perfectly adequate ...

    By HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KG based in Neu-Kupfer, GERMANY. from Forwarder Product line

  • Model HSM 405 H1 6WD - Harvester

    At first glance, there is not much to distinguish the 405H1 HSM harvester from its big brother, the H2. Why move away from a tried and tested configuration? On closer inspection, however, the 405H1 reveals itself to be an effective harvester for thinning forests with thin to medium trunk trees. Its profile, tailored to maximum performance, is ...

    By HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KG based in Neu-Kupfer, GERMANY. from Harvester Product line

  • Pento - Model 5002 TL - Two Drum Forestry Winch

    IGLAND 5 ton two-drum forestry winch. This model is ideal for thinning of forest and makes the final harvesting easy. The winch is designed for mounting on farm tractors with a 3-point hitch. The pull capacity is 50 kN (5 tons) for each drum. The advantage of a two-drum winch is to be able to distribute the load on two wire ropes. This results in ...

    By Igland AS based in Grimstad, NORWAY. from Two-Drum Winch Product line

  • Komatsu Forest - Model 830.3 - Forwarder

    The gentle king of efficient thinning. In any terrain.No thinning forwarder in the world is as efficient or as gentle on the forest floor as the Komatsu 830.3. No matter how difficult the maneuvering, or how site sensitive the forest, your profitability is always optimized. Here are a few of the product highlights:

    By Komatsu Forest based in Umeå, SWEDEN. from Forestry Forwarders Product line

  • Logman - Model 811H, 6 wheels - Wheeled havester

    Logman 811H is a forest havester of 6 wheels suitable for second and third thinning operations as well as clear felling.

    By Inderfor S.A. based in FINLAND.

  • ABAB - Model 251/350 - Felling Head

    Forest thinnings are a great resource for large volumes of biomass. The accumulating ABAB Felling head fells and organizes bundles of trees to the ground that can be forwarded further to roadside. With the ABAB Felling head you cut up to diam 35 cm and it is specifically designed for biomass harvesting, cleanings or pre-commercial thinning, ...

    By Allan Bruks AB based in BRO, SWEDEN.

  • Sampo - Rosenlew - Model FR28 - Forwarders

    Sampo-Rosenlew has responded to customer demands by designing the FR28 forwarder, which is suited for thinning operations. This 10-tonne load bearing forwarder is designed to complement our harvesters.  With its low dead load and high steering angle, the F28 is a nimble machine for efficiently transporting timber from stump to roadside.

    By Sampo Rosenlew Ltd based in PORI, FINLAND. from Forest Machines Product line

  • Königswieser - Model KGD 550 - Manual Log Winch

    The Königswieser winch KGD 550 for tractors up to 70 hp with a large drum diameter and the reduction gear provides optimum traction conditions! By the down drive the load is applied slowly and it will generate more power with less tractor power. The loading position of the rope for a guaranteed perfect in every winding rope ...

    By Königswieser Gerätetechnik GmbH based in Bad Wimsbach, AUSTRIA. from Manual Log Winches Product line

  • Model AFM 35 - Forestry Harvester Head

    AFM 35 is a powerful and versatile thinning head, which is suitable for conventional general as well as energy wood processing, multi stemming and loading. Optional multi tree handling cassette and the cutting blade is designed to speed up the cutting and handling of the small diameter energy wood. High feeding power and feeding speed ensure a ...

    By AFM-Forest Ltd based in Jyvaskyla, FINLAND. from Forestry Harvester Head Product line

  • Sampo-Rosenlew - Model HR46 - Harvester

    The HR46 is the new workhorse for first thinning. Even more powerful than its predecessor 1046pro, the harvester now has a larger, 135cc pump, which facilitates operation at an engine speed reduced by a third. This change improves performance and reduces consumption, which translates to increased profitability of thinning operations for the ...

    By Sampo Rosenlew Ltd based in PORI, FINLAND. from Forest Machines Product line

  • John Deere - Model 1110 - Forwarder

    The John Deere 1110 Forwarder heralded a new dawn of forwarder design when it was introduced almost 20 years ago. Since then it has become the world’s favorite forwarder. Now the legend continues with the 1110E. Versatility personified. The 1110E is plenty nimble for thinning operations. The 5500-mm load space and ample power ensure it can ...

    By John Deere based in Moline, ILLINOIS (USA). from Forwarder Product line

  • Fecon - Model FTX290 - Mulching Tractor

    The Fecon FTX290 is a 290HP low ground pressure tractor equipped with a Fecon BH120 Bull Hog mulcher. The Cummins QSC 8.3 engine, and over 100 GPM of hydraulic flow to Rexroth variable speed motors of the mulcher, makes this a high performance solution. Powerful oscillating steel tracks, 3.3 PSI ground pressure, and overall balance of the tractor ...

    By Fecon, Inc. based in Lebanon, OHIO (USA). from Forestry & Biomass- Tracked Mulching Tractors Product line

  • Model AFA 70 (70a) - Forwarders

    AFA 70 is the most effective machine for thinning, feeling and transport of bioenergy. With a total loading capacity of 4500 kilo and new transmission, this machine offers a unique capacity and mobility. AFA 70 can be equipped with different crane tip attachments for different  needs. The machine can also be equipped with air condition and ...

    By Agroforteka JSC based in Kaunas, LITHUANIA. from Forestry Forwarders Product line

  • Forestry Tractor

    'BELARUS' L82.2 forestry tractor is designed for reforestation and forest treatment operations, and also for transport operations in thinning areas. Manufacturer: 'Mozyr Machine Works'.

    By Minsk Tractor Works (MTW) based in Minsk, BELARUS. from Forest Machinery Product line

  • Sampo Rosenlew - Model 1046pro - Harvester

    Thinning harvesters work in young, dense forest. The design of the Sampo-Rosenlew harvester is underpinned by its suitability for thinning operations. The four-wheel, frame-steered harvester moves with excellent fluidity. Thanks to its powerful hydraulic traction motors and high-articulation cardan joint assembly, the unit can handle even the ...

    By Sampo Rosenlew Ltd based in PORI, FINLAND. from Forest Machines Product line

  • Fecon - Model FTX128L - Mulching Tractor

    The FTX128L offers exceptionally high performance in a compact tractor for any mulching job, big or small. Fuel economy, lower operating costs, and unmatched productivity means higher ROI than all other tractors in this class. The FTX128L is designed, cab to undercarriage, with the operator in mind.

    By Fecon, Inc. based in Lebanon, OHIO (USA). from Forestry & Biomass- Tracked Mulching Tractors Product line

  • TMK - Model 300 - Tree Shears

    TMK 300 is the beginning of the TMK product family. TMK 300 has the widest attachment options of all TMK products, and that makes TMK 300 into one of the most versatile shears on the market. Easy operating makes the TMK 300 a great choice for small scale users, and with very high productivity it fits perfectly for the professionals in the ...

    By TMK Energiakoura Ltd based in Hankasalmi , FINLAND.

  • KETO Supreme - Model Keto-51 - Harvester Head

    Efficient contract thinning is only possible if each operation is performed efficiently and accurately. Each operation has been taken into consideration in the structure of the head: grabbing the tree, sawing, starting the feed, accurate positioning for sawing and clean delimbing. The head has a fixed roller system, which means that there are ...

    By Kone-Ketonen OY based in Kristiinankaupunki, FINLAND. from Forestry Harvester Heads Product line

  • Model AFM 55 - Forestry Harvester Head

    AFM 55 is a solution for clear felling and later thinning operations, made with middle sized forest machines. AFM 55 has big capacity and perfect holding geometry for the big stems. High flow hydraulic valve together with proportional pressure adjustment exploits perfectly the base machine power. Three roller feeding together with four delimbing ...

    By AFM-Forest Ltd based in Jyvaskyla, FINLAND. from Forestry Harvester Head Product line

  • Model 200NF - Mulching Machine

    The 200NF is a 200hp mulching machine on tyres. It's three drive mode system allows it to easily move, whatever is the type of field. It's really well known in the forest industry for its off road capacities, its robustness, its easy drive and simplicity of use and maintenance. The 200NF has a 9t weight in use conditions, without the tool. Its ...

    By UNAC SAS based in Vergèze, FRANCE. from Forestry Clearing Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you