Only show results in Michigan? Ok

Root Grapples equipment for Forestry

  • Brush Hawk - Model BH - Extreme Duty Root Grapple

    Available in 72' and 81' wide. Lower teeth spacing is 9'.  Dual top grapple helps with load stabilization. Every tooth reinforced to the tip. Comes with hoses and couplers.

    By Weber Manufacturing LLC based in Coffeyville, KANSAS (USA).

  • NAI - Extreme Root Grapple

    Our Extreme Root Grapple is superb for moving logs, brush, rocks or just about any type of debris. Each of our hydraulic cylinders has a 2 inch bore with a 10 inch stroke and operates independently to adjust for uneven loads. All of our Extreme Root Grapples are built with 5/8 inch top quality A-36 steel with counter-sunk grease pins and bushings ...

    By North American Implements (NAI) based in Thomasvile, NORTH CAROLINA (USA). from Grapples Product line

  • Root Grapple Attachment

    Standard sizes 62″ or 74″ or custom built. 62″ also available in a single grapple. Constructed of 1/2″ plate steel with two 1 1/2″ solid shaft running thru the bottom. 1/2″ gussets welded in for extra strength. Two heavy duty grapples made from 1/2″ plate steel. Two 2″ x 8″ custom made ...

    By US Pride Products based in Hammond, WISCONSIN (USA). from Attachments Product line

  • Harleman - 72″ Root Grapple without Guard

    Move brush and felled trees quickly from the comfort and safety of your skid steer.

    By Harleman Manufacturing, LLC based in El Dorado Springs, MISSOURI (USA). from Skid Steer Attachments - Grapples Product line

  • Anbo - Model GR-L - 10-35 Horsepower Strongest Grapples

    These grapples are the strongest grapples available in the market. ANBO uses steel with a Brinnell rating (resistance to abrasion) more than 50% better than T1 and a yield rating (resistance to bending) almost twice that of T1. The design minimizes weight and preserves lift capacity but still delivers on the strength and versatility.

    By Anbo Manufacturing, Inc based in Colville, WASHINGTON (USA). from Rock, Root and Tree Grapples Product line

  • Root Rake Bucket

    OJB industries developed a root rake bucket with mechanical for on your excavator. With this bucket you can clean fence lines, clear bush and stumps and load brush. The teeth for the rake are made of 1.5” thick A571 Steel and are attached with each other through a 3”solid shaft. Plates made out of 1”steel are protecting the quick ...

    By OJB-Industries Inc based in Lucan, ONTARIO (CANADA). from Miscellaneous Product line

  • Anbo - Model SCT-GR - Sub Compact Tractors Grapples

    Lower tine bar to tie all the tines together. Hardened tine tips to avoid bending. Back raking capabilities with the grapple. Back raking ability using the back of rake With the grapple partly closed and digging backwards to prepare for seeding. Hydraulic cylinders are well protected. Serrated grapple tines for increased holding power. All moving ...

    By Anbo Manufacturing, Inc based in Colville, WASHINGTON (USA). from Rock, Root and Tree Grapples Product line

  • Kenco - Wheel Loader Brush / Debris Rakes

    Accessory root rake attachments add flexibility and higher production capabilities to any loader. Kenco offers a wide variety of Wheel Loader Rakes to meet your needs. Our Excavator & Dozer Brush Rakes make short work of those tough land clearing projects. Grapple rakes /debris rakes are ideally suited for handling demolition debris or piling ...

    By Kenco based in Ligonier, PENNSYLVANIA (USA). from Wheel Loader Products Product line

  • Root Grapple

    This skid steer attachment is for people who make a living with skid steers or tractors. It’s industrial strength and produced for every day use. Constructed of ½” top quality steel plate. (60,000 psi) Oversized points and bushings increase the durability. The lifting capacity of this skid steer attachment exceeds that of the ...

    By Loflin Fabrication LLC based in Denton, NORTH CAROLINA (USA).

  • Monster Root Grapple

    We boast the largest loading capacity of any root grapple on the market with this enormous skid steer attachment. You would think that it was produced for backhoes or trackhoes, but it’s design came about due to the increasing horsepower of skid steer loaders. This one is recommended for 75 horsepower skid steers or above. It’s ...

    By Loflin Fabrication LLC based in Denton, NORTH CAROLINA (USA).

  • Mini-Chisel Tool

    Economical tool for: Tillage, landscaping, root raking.

    By Ferguson Manufacturing Company based in Suffolk, VIRGINIA (USA). from Economy Implements Product line

  • IronWolf - Slasher

    Clearing and mulching, standing trees, brush & stumps, creating a clear, stable soil base, site clearing & site preparation, stands up to rocks in soil, site excavation of frozen soil with little or no mixing of sub soil into top soil. ONE PASS UP. ONE PASS BACK. You’re done. Standing trees, brush and stumps easily succumb to the ...

    By IronWolf based in Noble, OKLAHOMA (USA).

  • Model RBG and RBG2 - Root Rake Brush Grapple

    The Root Rake Brush Grapple 'RBG' is for Farm, Light Industrial, and Skid Loaders with lift capacities from 1,300 up to 4,000 pounds and comes in widths from 60 inches to 78 inches. Ideal for tree service. The Root Rake Brush Grapple 2 'RBG-2' is for Compact and Sub Compact Tractors and Mini Skid Steers with lift capacities from 450 up to 1,300 ...

    By W.R.Long Inc. based in Tarboro, NORTH CAROLINA (USA). from Grapples Product line

  • Land Pride - Model SGS15 Series - Skeleton Grapple

    Let the SGS15 Series Skeleton Grapple do the digging for you by removing roots, brush, and other timber or debris. The SGS15 offers 5-1/2' spacing between the teeth, smaller debris is sifted. Dual hydraulic cylinders can close at various gaps to handle irregular shapes, and serrated teeth make this grapple a workhorse in storm clean up and land ...

    By Land Pride - Great Plains Manufacturing based in Salina, KANSAS (USA). from Dirtworking- Grapple Product line

  • Harleman - 66″ Root Grapple without Guard

    Move brush and felled trees quickly from the comfort and safety of your skid steer.

    By Harleman Manufacturing, LLC based in El Dorado Springs, MISSOURI (USA). from Skid Steer Attachments - Grapples Product line

  • Model BC 18 - Felling heads

    The BC 18 felling heads make your work in the forest more productive and enable you to finish the job more quickly. Felling, gathering, cutting and loading everything from trees and brush to bushes and stumps can be performed easily. Trees are cut rapidly and the fixed blade is easy to maintain. The location of the centre of gravity makes it easy ...

    By Mecanil Oy Ab based in Liljendal, FINLAND. from Other Products Product line

  • Crane Boats

    Varied attachments such as clam shell, rake, grapple. Environmental spot dredging with crane mounted clam shells. Under weed raking of rooted aquatic vegetation to provide long term clear water control. Marina maintenance including pier repair, dock installation. Canal maintenance. Buoy installation & recovery. General recovery operations.

    By Aquamarine based in Oakville, ONTARIO (CANADA).

  • Homan - Root Raking Plough

    A heavy duty, multi purpose, tyned agricultural implement which can till the soil to make it ready for planting simultaneously with eradicating the sticks and the roots from the soil.

    By HOMAN Quality Equipment based in Toowoomba, AUSTRALIA. from Other Products Product line

  • D&E - Model RS - Skid Steer Stacking/Root Rake

    The Hydraulic Skid Steer Rake has the same general specifications as the Stacking/Root Rake. The hydraulic arms are two 2500 P.S.I. cylinders for heavy duty lifting, stacking, and loading. The separate arms work independently to adjust to various clamping situations.

    By D&E Manufacturing Inc. based in Moncks Corner, SOUTH CAROLINA (USA). from Rakes Product line

  • Tree Boss - Pivot Rotary Actuators

    Tree Boss will eliminate the dilemma happening today in the Nursery Industry where employees are usually at maximum cost and labor output is minimum. Tree Equipment Design has created a solution with the Tree Boss, since one operator can do the job of a whole crew. The Tree Boss loads and unloads balled trees off trailers with ease. It is ...

    By Tree Equipment Design, Inc. based in New Ringgold, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you