Only show results available in Massachusetts? Ok

Irrigation Flow Monitoring equipment for Irrigation

  • Flow Station

    The FlowStation is a powerful shared flow controller that allows up to 30 BaseStation 3200 irrigation controllers to share water resources. Whether you have one large mainline across a property, or you are combining controllers across multiple mainlines, the FlowStation offers the features and flexibility to tackle the job.

    By Baseline Inc based in Boise, IDAHO (USA).

  • Model BFM Series - Irrigation Flow Meters

    Baseline’s BFM Series Flow Meters are small, rugged, and highly reliable flow meters that are Baseline two-wire ready. The flow meter is available in 3/4” to 1 1/2” pipe sizes. The K and Offset values are preconfigured in the flow meters

    By Baseline Inc based in Boise, IDAHO (USA).

  • Model AG2000 - Spool Type Electromagnetic Irrigation Flowmeter

    The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3' to 12' pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop turning. ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Flow Master - Model A-1100 - Irrigation Meters

    We offer NH3 (anhydrous ammonia) irrigation meters in the standard #A-1100 Flow-Master, the A-1100-A Flow Master Kit & irrigation meter accessories. Catalog #A-1100 Flow-Master is a device to control the flow of NH3 for irrigation application. A controlled flow is accomplished by means of a nylon disc containing a series of 24 different sized ...

    By Continental NH3 Products Co., Inc. based in Dallas, TEXAS (USA). from Flow Control Meters & Manifolds Product line

  • MMM - Model DL-18 - Conventional Datalogger for Dendrometer

    Suitable for connecting up to 4 Dendrometers. USB interface, an internal battery lasts for more than one year. Memory for up to 1900 000 Measurements (memory for 4 Dendrometers for 1 year of data @ 1-minute logging interval), Resolution 0,2 to 0,5 μm (depending on Dendrometer model). Logging Intervall user defined between 1 sec. and ...

    By MMM Tech Support GmbH & Co. KG based in Berlin, GERMANY. from Dendrometer Product line

  • Sparling - Irrigation Saddle Flowmeter

    Specifically designed to provide accurate and reliable flow measurement to the irrigation marketplace, Sparling Instruments saddle flow meter is the ideal solution to trouble-free water flow measurement in irrigation's severe environments. The saddle design allows the meter to be used on existing piping and in many cases, these meters can replace ...

    By Sparling Instruments, LLC based in El Monte, CALIFORNIA (USA). from Propeller Flowmeters Product line

  • Wildeye - Farm and Irrigation Monitoring System

    Wildeye is an affordable, accurate & dependable farm and irrigation monitoring solution. Remotely monitor soil moisture sensors, flow meters, weather sensors, reservoir levels, and well & pump station performance from your desktop, tablet or mobile device.

    By Wildeye based in Fresno, CALIFORNIA (USA).

  • Hortau - Irrigation Automation Technology

    Hortau’s irrigation automation technology is a complete wireless system that integrates flawlessly with existing operations. Hortau irrigation automation helps remove production errors and gives growers more visibility into the irrigation process.

    By Hortau based in Lévis,, QUEBEC (CANADA).

  • Model FT-A10C - Automatic Dripper Flow Tester

    This unique dripper flow tester bench was developed by Drip Irrigation Systems, LLC. to measures dripline flow rates in real time.

    By Drip Irrigation Systems, LLC. (DIS) based in Del Mar, CALIFORNIA (USA).

  • PFS Series - Irrigation Flow Sensors

    The Baseline PFS Series Flow Sensors have a unique low drag, a lightweight impeller design, and a specially engineered tee cavity and impeller placement to ensure smooth flow and precise performance at the lowest flow rates.   Every Baseline PFS Series Flow Sensor is two-wire ready with a Flow biCoder built into the tee insert.  ...

    By Baseline Inc based in Boise, IDAHO (USA).

  • Model TX110/210 Series - Insertion Turbine Irrigation Flow Sensor

    The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Model TX800-Serie - Insertion Turbine Irrigation Flow Sensor

    The TX800-Series are insertion turbine meters designed for use in 1-1/2' to 8' pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ease of ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Codema - Ebb Flow Systems

    An Ebb-flow System is one of the hydroponic irrigation solutions and usually installed either on specialized growing benches or on a concrete floor. It’s known for its simplicity in design, reliability of operation and it’s low initial investment cost. It is therefore selected by bedding plants, pot plants, lettuce and herb growers all ...

    By Codema Systems Group B.V. based in Bergschenhoek, NETHERLANDS. from Cultivation Systems Product line

  • AgriFlo - Model XCi - Smart Packaged Farm Water Flow Metering

    The AgriFlo XCi can be used to monitor vital farm equipment and on-farm sensors. Use the versatility of AgriFlo XCi to monitor inputs as diverse as: irrigation flows; farm wastewater flows; water quality; dam levels; soil moisture; pump and engine management systems. AgriFlo XCi is easy to install, easy to use and virtually maintenance free. ...

    By MACE based in Dural - Sydney, AUSTRALIA.

  • DRTS - Model FT-10 - Drip Irrigation Flow Testing Machine

    DRTS FT-10 automatically tests 10 drip samples at desired test pressures. Tests are fully configurable for up to 25 test pressures including a test for anti drain (CNL, ND) drippers. Simply Connect the samples, choose one of the tests, and minutes later you have all of the relevent datafor the dripper samples including flow rate, CV, temperature, ...

    By Drip Research Technology Services (DRTS) based in San Diego, CALIFORNIA (USA). from QC Equipment Product line

  • Model AG2000 - Irrigation Magmeter

    The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 ...

    By Dynotek Fluid Data Management based in Arvada, COLORADO (USA). from Pipeline Flow Measurement Product line

  • Model TX100/200-Series - Insertion Turbine Irrigation Flow Sensor

    The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Agrónic - Model 4000 - Irrigation Controllers

    The most complete controller for conventional fertigation, to- tally configurable and adaptabl e to any need of every user.  Its multiply use and expansion  possibilities offer to the owner all the work modalities available at present time

  • MMM - Model DC-2 - Dendrometer for Circumference

    This model is optimized for for tree diameters of more than 5 cm. Automatic adjustment of the tension, sensitive measurements even with very large trees, pressure of the wire cable to the tree independent of tree size.

    By MMM Tech Support GmbH & Co. KG based in Berlin, GERMANY. from Dendrometer Product line

  • Agricultural Irrigation

    If you are looking to water potatoes or carrots, herbs or grass we are confident that our range of irrigation reels and pumpsets will provide the solution you are looking for. Tey Farm Systems are dealers for the Irrimec range of hosereels offering hose diameters from 40mm to 125mm and hose lengths from 120m to 850m.

    By Tey Farm Systems Ltd based in Essex, UNITED KINGDOM. from Imigation Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you