Only show results in Virginia? Ok

Irrigation Management equipment for Irrigation

  • Premium

    Irritec - Capillar System

    The Capillar System is a localised irrigation system designed by Irritec for the nursery, flower-growing and greenhouse sector.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Drip Irrigation Product line

  • Premium

    Irritec - Model Commander Evo Basic - Irrigation Programmer

    The basic version of our programmers. Up to 208 valves divided into 64 separate blocks.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Automation Product line

  • P-MM - Moringa Monitoring & management system

    The cultivation, looking after and harvesting plants is an important factor and it requires a lot of knowledge, skill and techniques viz: the best cultivation season to make the plant early matured, then an amount of seeds to be planted, an irrigation & fertilization method, a control method of weeds , investigate quality, yield, and degree of ...

    By Advanced Biofuel Center based in Jaipur, INDIA.

  • FieldBOSS - Control Panel

    This top-of-the-line irrigation management system helps you establish position accuracy and repeatability for precise control of irrigation, chemigation, and other accessories– all crucial for resource conservation and increasing efficiency.

    By New Way Irrigation based in South Lethbridge, ALBERTA (CANADA).

  • Ruby - Layflat Hose

    Temputure Range: -20°C to +70°C. Construction : 3-Ply High tenacity polyester yarns. Both tube and cover are extruded simultaneously to obtain maximum bonding. Caution : For liability purposes, if temperature exceeds 44°C the working pressure will go down.

    By PM Group based in Mersin, TURKEY. from Layflat Hose Product line

  • FloBoy - Model M - Pumping System

    FloBoy is the system of choice for small to mid-size lift, boost and well pump applications (large sports turf, business complexes, cemeteries, nurseries, agriculture and other large irrigation projects.), and supports rainwater and stormwater harvesting. It is equipped with VFD technology for improved system efficiency, simple touch screen ...

    By ITT Flowtronex - a Xylem brand based in Dallas, TEXAS (USA). from Variable Speed Pumping Systems Product line

  • Model 125 / 600 - Hose Reel

    The HÜDIG hose reels are designed for storage and receiving of flexible hoses up to a maximum length of 700m with a diameter of 100mm. The drive for the receiving of the tubing ensues via a hydraulic motor with a very well-dimensioned power reserve. The hydraulic motor is enabled or disabled through the action bracket by a staff member ...

    By HÜDIG GmbH & Co KG based in Celle, GERMANY. from Irrigation - Hose Reels Product line

  • Model F-5516 - Irrigation High Limit Constant Flow Valves

    Griswold Controls’ Irrigation High Limit Constant Flow Valves limit the flowrate (gallons per minute) to your exact need. Today a maintenance person can change the flow on an irrigation zone by easily adjusting the valve with the handle, increasing or decreasing that particular zone. This is a problem because the system is designed for a ...

    By Griswold Controls based in Irvine, CALIFORNIA (USA). from Irrigation Valves Product line

  • DUMO - Algacleaner

    Ultrasound is a method that has been known for a long time as a means of fighting Algae. This environmentally friendly method has not yet broken through because the technical and scientifical side of this field have been in a embryonic stadium.

    By Toscano Línea Electrónica SL based in Alcalá de Guadaíra, SPAIN. from Ultrasounds & Environment - Algae and Pathogens Product line

  • Adritec Group - Linear Move Irrigation Machine

    The lateral ( Linear ) move systems allow farmers to irrigate up to 98 percent of a square or a rectangular field, as well as 'L-shaped' fields. With a choice of water supply and guidance systems, each linear move system can be customized to individual needs. These systems are designed to irrigate fields from 3 to 13 hectares.

    By Adritec Group International based in Amman , JORDAN.

  • DUAL DRIP - Integral Driplines

    The integral driplines DUAL DRIP represent one of the most technologically advanced products in the field of the drip irrigation with dual-side delivery by every dripper. Thin types, light pipe, is generally destined for cultivations that do not overcome 2 years; medium-heavy types is sui table for multi-year applications. The 15 cm spacing, ...

    By Soaplast srl based in Regalbuto, ITALY. from Agricultural Irrigation Product line

  • Swing Arm Corner Systems (SAC)

    The Swing Arm Corner System (S.A.C.) lets you get more irrigated acres without buying more land or setting up a new water system. Our exclusive swing span design provides uniform application of water and chemicals and can be retrofitted on existing Reinke systems or on many competitor systems.

    By Ritthaler Irrigation based in Fremont, NEBRASKA (USA). from Irrigation Systems Product line

  • K-Line - Revolutionary Irrigation System

    The heart of the system is a series of tough plastic pods protecting a sprinkler firmly attached to the special K-Line low density tubing. The system can be run on pressures ranging from 35 to 60psi at the sprinklers. It’s  designed to distribute water through a slow absorption method for up to a 24 hour period, (like a soft rain). This ...

    By K-Line Irrigation based in St. Joseph, MICHIGAN (USA).

  • Anto-Foundering Disc

    This item is used to hold up steel stakes in Upwards-Trained Vertical Trellising. When the plant grows, the greater weight tends to push the stake supporting it into the ground, which causes problems during mechanical harvesting. Thanks to a special housing in the disc, the stake can be inserted besides the plant.

    By Vaer Srl based in San Martino in Rio (RE), ITALY. from Accessories for Vineyards and Irrigation Product line

  • GreenTube

    The ongoing trend towards healthier, toxic free food and the need to increase quality yields out of every acre, has lead us to develop the most advanced greenhouse irrigation system yet; the only one of its kind that actually uses the same micro-tube technology as the one used in the medical industry

    By MDC Industries Ltd. based in Sderot, ISRAEL.

  • Round Drip Irrigation

    Drip irrigation, also known as trickle irrigationor micro irrigationor localized irrigation, is an irrigation method that saves water and fertilizer by allowing water to drip slowly to the

    By ERHAS Pipe and Machinery Equipment Industry Inc. based in Karatay/Konya, TURKEY. from Drip Irrigation Product line

  • NIBCO - Model Class 125, T-211-YK - Globe Valve - Bronze, Irrigation

    The NIBCO rising stem, bronze angle globe valve is specifically designed for irrigation in-ground applications. It features a cross type operating handle used in conjunction with remote operating wrench.

    By NIBCO Inc. based in Elkhart, INDIANA (USA). from Valves Product line

  • DEMA - Model TF 25 Series - High Flow Fertigation

    The TF 25 Series are designed for high water flow for fertigation, pesticide and other in-line additives. They are intended for typical fertilizers, pesticides and agriculture or irrigation additives. They are not designed for strong acids, alkalines or solvents. The TF 25 is designed for water flow up to 110 gpm (25 m³/hr.) and operates from ...

    By DEMA Engineering Company based in Saint Louis, MISSOURI (USA). from MixRite AG and Irrigation Water Driven Injectors Product line

  • Gomaco - Model Commander II (GT-6200) - Concrete Paving Equipment

    Commander II versatility is achieved with GOMACO engineering and design. The two-track design has built-in versatility for handling multi-application slipform paving projects. The GOMACO Commander II has been called upon for applications such as: Curb and gutter Barrier Bridge parapet Irrigation canal Sidewalk Bicycle path Shoulders And more!

    By Alta Equipment Company based in Wixom , MICHIGAN (USA).

  • Spraying and Irrigation

    Can bo lilted on all spraying and sowing machines. Eliminatcs the risk ol overdosage or lack of treatment on strips ol crops.The foam spreader is made from a single piece of EPDM and withstands accidental impacts due to uneven ground. Available in two heights (350 Of 180 mm). Safety valve located on tank plug adjusted at 1 BAR (15psi). Power ...

    By Agrimex S.p.A. based in Suzzara (MN), ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you