Brooks Brothers - Model PTU-92 -Multi-Use Pole, Reel and Cargo Trailer

POLE BOLSTERS

• Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
• Center Bolster: 89”W Fixed 3” Double C-Channel with 9” Stanchions
• Rear Bolster: 89”W Removable 3” Double C-Channel with 9” Stanchions
• Stanchions: (4) four – 9” Chain Adjusted Stanchions Sliding & Removable
• (3) three – Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (3) three – 15’ L x 4” W x 12000 lbs. Nylon Straps

TONGUE & HITCH

• 6” x 4” x 1/4″ Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2″ Lunette Eye, 42,000 lbs. Capacity
• 3/8” x 36” Safety Chains with Safety Hooks and Anchor Shackles

A-FRAME & JACK

• 6” x 2” Tubular Steel A-Frame
• Drop Leg Jack, 12,000 lb. Static Load Capacity

MAIN FRAME

• 6” x 3” Tubular Steel Main Frame
• 8” x 6” Receiver Tube
• 7” x 3“ Tubular Steel Crossmembers Under Center and Rear Bolsters
• 3” Structural C-Channel Crossmembers on 14 1/2” Centers Under Cargo Bed Floor

CARGO BED

• Interior Dimensions: 9’L x 64”W x 15”H with Reinforced Fold Down Tailgate
• Floor: 1/8” Smooth Steel Construction
• Sidewalls: 12 Gauge Formed in Brake for Added Strength
• Tailgate: Tubular Construction, w/ Offset Hinges so Debris is Easily Cleared
• (4) four – 5/8” D-Rings, 19,000 lbs. Capacity each, Floor Mounted (1) one each Corner

FENDERS

• Fabricated 12 Gauge Steel Construction, Integrated with Tool Boxes

TOOL BOXES

• Tool Boxes Fabricated from 12 Gauge Smooth Steel, Intergraded Construction
• (6) Side Entry Doors with Twist Latches and Key Locks
• (2) Swing up Lids on Top Boxes with Twist Latches and Key Locks
• A-Frame Box: (1) 24”D x 15”H x 88” W
• Side Front Boxes: (2) 22 1/2″L x 12”D x 20 3/4″H
• Side Rear boxes: (2) 16 1/2″L x 12”D x 20 3/4’H
• Top Boxes: (2) 70”L x 12”W x 7”D
• Weather Tight Rubber Gaskets

12 VOLT WIRING SYSTEM

• ICC & DOT LED Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker LED Lights
• S.O. cable wiring harness run internally wherever possible. External wiring is clamped on 16″ centers with rubber lined clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• Internal Wiring in Tongue Extension, Receptacle at Each Pin Location
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
• Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger

PAINT

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners

AXLE OPTIONS

• 7000 lb. Tandem – Payload: 12,000 lbs.  GVWR 16,000 lbs.
• Electric Brakes
• (4) four – ST235/80R16 LR-E, (14 Ply) Capacity 3,520 lbs.
• 8000 lb. Tandem – Payload: 14,500 lbs.  GVWR 18,400 lbs.
• Electric Brakes
• (4) four – 215/75R/17.5 LR-H, Capacity 4,805 lbs.

OPTIONAL SPARE TIRE & WHEEL

• ST235/80R16 LR-E    (7K Axle)
• 215/75R/17.5 LR-H     (8K Axle)
• Rubber Wheel Chocks, 7″H x 10″L x 8″W

BOLSTER OPTIONS

• 64″W Tubular Bolster, Pole Stops, Winch Binder and Nylon Strap  (In Lieu of 45″ Front Bolster)
• U-Type Single Pole Cradle
• Winch Binder and Nylon Strap  (In Lieu of 45″ Front Bolster)
• 60″W (45″ ID) 3″ Double C-Channel Bolster, Winch Binder and Nylon Strap  (In Lieu of 45″ Front Bolster):
• with 9″ Chain Adjusted Stanchions
• with 21″ Lever Lock Stanchions
• (4) – 30′ L Nylon Winch Strap in Lieu of 15′
• (4) four – 21″ Lever Lock Stanchions, Sliding and Removable
• in Lieu of Standard 9″ Chain Adjusted Stanchions
• Installed on Center and Rear Bolsters

REMOVABLE REEL RACKS OPTIONS

• (1) pair – 36″H Reel Stands with 3″ Receivers Tubes
• (Reel Bar Not Included)
• (1) pair – 3″ Receiver Tubes Only
• 2 7/8″ Reel Bar with (2) Locking Collars
• Standard Reel Rack Package
• (1) pair – 36″H Reel Stands
• (1) pair – 3″ Receiver Tubes
• (1) 2 7/8″ Reel Bar with (2) Locking Collars
• Maximum Reel Size – 68″D x 50″W x 2,200 lbs. Capacity
• Reel Rack with HD Bronze Bushings Package
• (1) pair – 36″H Reel Stands with Bronze Bushings
• (1) pair – 3″ Receiver Tubes
• (1) 2 7/8″ Reel Bar with (1) Crossarm and (1) Locking Collar
• Maximum Reel Size – 68″D x 50″W x 2,500 lbs. Capacity

OPTIONAL REEL RACKS WITH OVERSPIN/TENSIONING BRAKES

• 8″ Overspin Brake Package
• 8″ Brake w/ 8″ x 7/16″ Solid Stainless Steel Disc, Cast Aluminum Caliper and Tension Adjusting Handle
• (1) pair – 36″H Reel Stands with Bronze Bushings
• (1) 2 7/8″ Reel Bar with (1) Crossarm and (1) Locking Collar
• Maximum Reel Size 68″D x 48″W x 2,500 lbs
• 12″ Medium Duty Tensioning Brake Package
• 12″ Tension Brake w/ 12″ x 5/8″ Solid Bronze Disc, Cast Steel Caliper and Tension Adjusting Handle
• (1) pair – 36″H Reel Stands with Heavy Duty Bronze Bearings
• (1) 2 7/8″ Reel Bar with (1) Crossarm and (1) Locking Collar
• Maximum Reel Size 68″D x 48″W x 3,000 lbs

HITCH & JACK OPTIONS

• 3″ Lunette Eye  (In Lieu of 2 1/2″ Eye)
• Visible Registration Holder
• Full Width Jack Handle Extension:
• Add to One Side
• Add to Both Sides (Requires Store-Away Handle)

CARGO BED OPTIONS

• Additional D-Rings
• Chains on Tailgate

WIRING & LIGHT BAR OPTIONS

• Light Bar
• (2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
• 36″L x 4″ x 4″ Tubular Steel Body
• Chain Adjusted Mounting Base
• 25′ of Cable with 6-Way Aluminum Die Cast Connector
• Warner 6-Way Connector
• in Lieu of Standard 6-Way Connector
• Solar Charged Breakaway Kit
• In Lieu of Standard Kit