D&M - Model Slashbuster XL 480SB -Brush Cutter

These two extreme service brush cutters are identical in design and differ only in size and weight. On both models, a "S-7" mulching disk coupled with its "MAGNUM" drive system is more productive in large material than a conventional flail mower blade.

The HD 422, with its 42 inch mulching disk, is an excellent match for smaller excavators or long reach excavators that need a lighter attachment at the end of the stick. In long reach applications such as drainage management the performance of the HD 422 brush cutter sets a new productivity standard.

The HD 482, with its 48 inch mulching disk, is an excellent performer when matched to a 15 to 20 ton excavator.

Both attachments have a virtually unlimited shredding capacity with production rates limited only by available horsepower.

Low operating costs of the "S-7" mulching teeth isn`t their only advantage. Designed to be regularly sharpened in place with an angle grinder you don`t have to wait for a decline in performance large enough to justify replacement.
   
Long bearing life is assured with a standard rotating hub debris guard and self-purging grease system working together to keep out water and contaminants. Adjust bearings to zero end play and grease daily for best results.
   
Tangles with wire are less likely to slow you down with our automatic wire shear, a standard feature on both models.

Reduce the size of mulched material more than typical rotary mowers. Close-up of fixed mulching teeth inside the shroud, a standard feature on HD models.

• 180 Degree hydraulically operated rotating shroud
• Cuts brush and trees to 8" diameter
• 48" cutting swath
• Third boom & material handler standard
• Automatic wire shear standard
• Rotating hub debris guard standard
• Optional wheel speeds to 800 RPM
• Optional flail mower blade
• Shown w/ optional 90-degree tilt mount
• Optional remote herbicide applicator
• Adaptable to any excavator brand from 35,000-lb to 100,000-lb