Haybuster - Model 2564 - Balebuster - Bale Processor
From Bale Processors
Processing bales for erosion control, feeding or bedding cattle or poultry are tasks that the Haybuster 2564 Balebuster takes on with vigor and determination. The 2564’s newly designed fan, spouts and discharge conveyor combined with the Haybuster patented live floor in the bale chamber, heavy duty flail tube with 40 flails and the two stage bale loader, makes it the best processor for a multitude of jobs. For 30 years we have built Haybuster Balebusters and have listened to our customers and have built the 2564 with both the commercial operator and the farmer/rancher in mind.
-
Most popular related searches
Features
REDEFINED FAN DISCHARGE WITH SIX SPOUT
OPTIONS
Redesigned fan discharge with longer transition.
Available Spouts:
3 ft Curved Spout Kit (open curve)
Enclosed curved spout with flanged end
Straw Cannon Kit
Mini-gun Spout Kit
Hose Kits -10' x 25' and 10' x 50'
360° HYDRAULIC FAN SPOUT ROTATION AND VERTICAL FAN ROTATION
The 2564 Balebuster allows 360 degree rotation of the fan discharae soout and vertical fan rotation usina tractor hydraulics.
INLINE DRIVE P.T.O. WITH SLIP CLUTCH PROTECTION
The unit is powered through the in line P.T.O. and oil bath chain case. The chain drive increases the RPM of the rotor and drives the newly designed fan. In addition, the drive line is protected by an
overrunning clutch.
HEAVY DUTY IMPROVED FAN
The new fan design is welded on a HD 2 inch shaft for improved fan output. The fan housing and discharge chute is lined with AR 400 high abrasion steel for long life and improved performance. Both horizontal and vertical articulation is accomplished by hydraulics controlled from the tractor cab with a joystick control.
HEAVY DUTY OIL BATH CHAIN CASE
The unit is powered through the in line P.T.O. and oil bath chain case. The chain drive increases the RPM of the rotor and drives the newly designed fan.
PROVEN DUAL-STAGE LOADER Haybuster's
HD two stage bale loader not only loads bales but also carries a second bale to improve feeding/bedding/muiching efficiency.
EASY ACCESS SHREDDER DOOR
The large access door allows easy accessibility to the flail tube, screens and transition auger. Switching from fan discharge to conveyor discharge is also accomplished here, and only takes a few minutes to do the conversion. Screens are available in 2', 3' and 4' round as well as 4 1/2'x 9' and 6 1/2' x 9'
IMPROVED HEAVY-DUTY ROTOR WITH 40 FLAILS
The newly designed rotor tube holds 40 HD flails for increased performance. The transition auger delivers processed product to the fan and is protected by an automatic clutch.
TRANSFER AUGER BEARING PROTECTED BY AUTOMATIC CLUTCH
IMPROVED BALE CHAMBER/SLUG BAR
The Bale chamber with the three chain slat conveyor (live floor) is built heavier and higher to withstand the weight and size of today's larger bales. The 9 heavy-duty adjustable slug bars allow for wide range of adjustments for various products. Ten additional stationary slua bars can be added for more even feedina and a finer cut.
Specifications
WEIGHT
Total 6,325 lbs (2,868.97 kg)
TRANSPORT DIMENSIONS (Empty , Loader Fully Raised)
Width 8 ft 11 in (2.71 m)
Length 16 ft 6 in (5.02 m)
Height 10 ft 9 in (3.26 m)
WORKING DIMENSIONS (With 1 Bale, Loader Fully Raised.)
Width 10 ft 3 in (3.12 m)
Length 16 ft 6 in (5.02 m)
Height 10 ft 9 in (3.26 m)
WORKING DIMENSIONS (With 2 Bales, Loader in Bale Transport)
Width 10 ft 3 in (3.12 m)
Length 22 ft 7in (6.88 m)
Height 10 ft 9 in (3.26 m)
CHASSIS FEATURES
Towing Arrangement Universal Hitch, Height Adjustable w/safety chain
Tires Road or Floatation
Axle Extension Optional 12 in.
Bearing Type Tapered Roller
BALE LOADER
Type Integral 2 Stage, Twin Boom Arms
Bale Tines Tubular Steel, 10° Float, 4 Position Width
Adjustable Hydraulic Cylinder 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting
BALE CONVEYOR
Type Three roller chain with bolt-on cross slats, with ball bearing center support
Drive Hydraulic Orbital Motor with Adjustable Flow Control
BALE SHREDDER CHAMBER
Max. Bale Size 5-1/2 ft long x 6-1/2 ft dia (1.67 m x 1.98 m)
Max. Bale Weight each 2,000 lbs (907.2 kg)
Rotor Length 78 in. (1.98 m)
Rotor Diameter (Flails extended) 25-1/2 in (64.8 cm)
Rotor Bearing Ball, 1-3/4 in (4.46 cm)
Number of Flails 40
Flail type Swinging / Heavy Spring Steel
Screen Type Slotted, 2 Sizes Available
Transfer Auger Dia. 12 in (30.5 cm)
Number of Slug Bars 9-Additional, 10 Fixed optional
Slug Bar Single Point Adjustment with 5 Settings
BLOWER FAN
Size 44 in dia (111.76 cm)
Number of paddles 6
Bearings 2) 1-3/4 in (4.46 cm) Ball
OPERATOR CONTROLS
Two hydraulic outlets required
1 set for bale conveyor (comes with flow control)
1 set with in-cab electric over hydraulics (standard equipment) to control
loader function, spout/cannon for horizontal and vertical adjustment.
Requires 12 volt DC three pin power outlet.
SPOUT OPERATION
Vertical Fan Housing Rotated by Hydraulic Cylinder
Horizontal Spout Rotates 360 degrees
Outlet 3 ft. Curved Spout has an Adjustable Deflector
Protection Hinged Breakaway with shear bolt protection
REQUIREMENTS FOR OPERATION
PTO Horsepower Required 100 hp (76.6kw) to 155 hp (115.6 kw)
PTO Type 1000 RPM, 1-3/8 in. (3.49 cm) diameter shaft with 21 splines.
Min. Tractor Hydraulic Output 8 gpm @ 1500 psi (30.34 m @ 105.6 kgf/cm squared).
Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
Tractor Weight Must be of equal or greater weight than that of a 2564 with 2 bales
Options
Tires
(Set of 2) 31x10.5x15 - load rating 'C' Highway Rated Tires
(Set of 2) 14L X 16.1 8 ply Flotation Tires
(Set of 2) 12.5L x 15 8 ply Implement tires
Standard or Constant Velocity PTO
Discharge Spouts - 360°
Select from the following:
3 ft Curved Spout Kit (open curve) - for most applications such as feeding, bedding and erosion control .
Enclosed curved spout with flanged end- facilitates farther application of mulch/bedding than the open curved spout- almost as far as straw cannon- and can be rotated 360 degrees.
Straw Cannon Kit - for bedding and erosion control - shoots straw up to 100 feet.
Mini-gun Spout - The mini gun gives the operator an adjustable deflector to put on the enclosed curve spout. Thus giving more control of the product stream.
Additional Spout options:
10” x 25’ and 10” x 50’ hose kits- for placing mulch and bedding more precisely. Great for poultry barns, smaller areas that need to be mulched. Note: there is an adaptor in the hose kit that replaces the spout on the transition.
Without a Spout - Using just the transition without any spout is useful in areas where distance (0 to 40 ft (12.2m)) is not an issue.
Axle Extensions
12' bolt on axle extensions - provide improved stability on slopes
Recutter Screen Sizes
Use recutter screens to adjust the length of cut to meet the needs of your application. Screens are available in 2” round, 3” round, 4” round, 4-¼ in x 9-½ in Slotted, and 6-¼ in x 9-½ in Slotted.
Additional Stationary Slug Bars
Up to 10 additional Stationary Slug Bars may be added for improved product flow of wet or rough product, and they also help produce a finer cut.
Fenders
(NOTE: Fenders are not useable on 2564 machines equipped with flotation tires)
Right-hand Shredder Chamber Extension
The right-hand shredder chamber extension- helps keep loose product in the processing chamber.
Customer reviews
No reviews were found for Haybuster - Model 2564 - Balebuster - Bale Processor. Be the first to review!