HM Trailers - Model HMU -Horse Muck Trailer
HM chassis is made from 355 grade (structural) rectangular hollow section. This gives greater strength and does not allow a build up of material on ledges. Supporting a single hydraulic ram for tipping. Made with clear panels to allow daylightinto the trailer to aid visibility. Highly recommended, especially with current slurry legislation to help with effluent run off.
-
8T Capacity
-
4880mm (16ft) Body length
-
2100mm (6ft 10in) Max width
-
2100mm (6ft 10in)Body depth
-
17° Access angle
-
80mm Square axle
-
6300mm (20ft 8in) Overall length
-
12.5/80 R15.3 Standard wheels
-
6T Capacity
-
3600mm (11ft 10in) Body length
-
2100mm (6ft 10in) Max width
-
2100mm (6ft 10in) Body depth
-
17° Access angle
-
70mm Square axle
-
5020mm (16ft 6in) Overall length
-
10/75 R15.3 Standard wheels
-
4T Capacity
-
2700mm (8ft 10in) Body length
-
2100mm (6ft 10in) Max width
-
2100mm (6ft 10in) Body depth
-
17° Access angle
-
70mm Square axle
-
4120mm (13ft 6in) Overall length
-
10/75 R15.3 Standard wheels
All muck trailers in this range are single axle.
Via front ramp made of chequerplate. This istreated with grit between paint coats to form a nonslip finish. The ramp is fitted with coil springseither side to aid closing.
SIDE PANELS
All muck trailers feature horizontally folded side panels for greater strength.
Single door, swing away. Double doors are an option.
-
Front access ramp in chequerplate
-
Single piece rear door
-
L.E.D lights
-
Hand brake
- High speed axles
- Mudguards & mudflaps
- Variation in body size
- Side marker lights
- Ropehooks
- Clear roll over sheet
- Double rear door
- Custom colour
- Full selection of wheels & tyres