- Home
- Equipment
- north america
- canopy monitoring
Show results for
Refine by
Canopy Monitoring Equipment Supplied In North America
33 equipment items found
Premium
Manufactured by:Delta-T Devices Ltd. based inBurwell, UNITED KINGDOM
The SunScan Canopy Analysis System uses field measurements of Photosynthetically Active Radiation (PAR) in crop canopies to provide valuable information about Leaf Area Index (LAI) and biomass production. The SunScan canopy analyser is optimised for low regular canopies such as most agricultural crops. The 1m probe enables rapid spatial averaging of large areas and PAR mapping for non-uniform ...
by:Synergy Resource Solutions Inc based inBelgrade, MONTANA (USA)
The laser point sampler is a small, easy to use, affordable laser device for point intercept monitoring, line intercept monitoring, and any monitoring protocol that requires a repeatable, plumb/vertical ...
Manufactured by:Growlink based inDenver, COLORADO (USA)
With the Blink XT cameras you can gain valuable insight into the transpiration from your crop, the cell-division speed, cell differentiation (generative/vegetative) and cell stretching. This allows you to make even better adjustments and achieve the highest yield from your Growlink automation ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-500 is a self-powered, analog full-spectrum quantum sensor with a 0 to 40 mV output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, and growth ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The MQ-500 has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, and growth ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
Apogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-326 has a sensor bar with 6 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use in sunlight. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include PPFD (Photosynthetic ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
Apogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-323 has a sensor bar with 3 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use with electric lights. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include PPFD ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
Apogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-311 has a sensor bar with 10 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use in sunlight. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include PPFD (Photosynthetic ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
pogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-313 has a sensor bar with 3 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use in sunlight. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include PPFD (Photosynthetic ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
Apogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-316 has a sensor bar with 6 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use in sunlight. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include PPFD (Photosynthetic ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-222 is an amplified original quantum sensor with a 0 to 2.5 V output that has been calibrated for use with electric lights. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-225 is an amplified original quantum sensor with a 0 to 5 V output that has been calibrated for use with electric lights. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
Apogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-321 has a sensor bar with 10 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use with electric lights. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. Typical applications include PPFD ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-110 is a self-powered, analog original quantum sensor with a 0 to 800 mV output that has been calibrated for use in sunlight. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-224 is an amplified original quantum sensor with a 4 to 20 mA output that has been calibrated for use with electric lights. The sensor was designed for use in environments with significant background electrical noise that can be found in many industrial applications. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-212 is an amplified original quantum sensor with a 0 to 2.5 V output that has been calibrated for use in sunlight. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-215 is an amplified original quantum sensor with a 0 to 5 V output that has been calibrated for use in sunlight. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-120 is a self-powered, analog original quantum sensor with a 0 to 800 mV output that has been calibrated for use with electric lights. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or ...
Manufactured by:Apogee Instruments, Inc. based inLogan, UTAH (USA)
The SQ-214 is an amplified original quantum sensor with a 4 to 20 mA output that has been calibrated for use in sunlight. The sensor was designed for use in environments with significant background electrical noise that can be found in many industrial applications. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux ...
Manufactured by:Skye Instruments Limited based inLlandrindod Wells, UNITED KINGDOM
Photosynthetically Active Radiation or PAR light lies in the range 400-700nm and is the part of the sun’s spectrum used by plants for photosynthesis. The PAR line quantum sensor consists of 33 individual sensors evenly spaced along an 850mm length. The design and diffusing cover ensures the average of PAR light falling along the whole length is measured. Measuring light profiles with a ...