- Home
- Equipment
- netherlands
- mulcher
Refine by
Mulcher Equipment & Supplies In Netherlands
337 equipment items found
Manufactured by:FACMA s.r.l. based inVitorchiano (VT), ITALY
The FX model is suitable for grassy mantles, runners and stones until 6 – 7 cm of diameter. Bonnet in anti-wear domex iron, structural steel with high resistance. It is a mulcher with fixed hitch, to be mounted on the three points of the rear hydraulic lift of tractors, with a power from 18 HP to 85 HP. Available also with hammer model ...
Manufactured by:Niubo Maquinaria Agricola based inTorregrossa (Lérida), SPAIN
Special mulcher for grass and branches of up to 3 cm of diameter. Displaced gearbox (not centered) 3 points linkage on massive bars zinc. Mechanical displacement by screw. Gearbox with free wheel. Supports of hammers very reinforced Back roller of 140 mm of diameter with scraper. ...
Manufactured by:FACMA s.r.l. based inVitorchiano (VT), ITALY
The BPEL model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. Bonnet in anti-wear domex iron, structural steel with high resistance. The hitch is available with manual or hydraulic side shift. Powered by tractors from 25 HP to 100 HP. BPEL/RV: the BPEL model can be built, on request, on the reversible version, to be mounted in the front of ...
Manufactured by:FACMA s.r.l. based inVitorchiano (VT), ITALY
The model VBE is advised for mulching grassy mantles, runners and stones until 10 – 12 cm of diameter in orchards. This mulcher uses the model VPE hammer. Bonnet in anti-wear domex iron, structural steel with high resistance. The hitch is available with manual or hydraulic side shift. Powered by tractors from 25HP to 100 HP. VBE/RV: the VBE/RV model can be built, on ...
Manufactured by:Faustini s.n.c. based inRonco All`Adige VR, ITALY
Mulcher FTP GS with increased lateral motion with hydraulic arms. No inclination. Suitable for plantation in plain with wide top. Mulcher FTP thanks to the structure, shell 5+5mm, are suitable for heavy works and for tractors of medium and high power Ømax 55/65mm. ...
Manufactured by:Crushing Tech S.r.l based inAltamura (BA), ITALY
TRX is an universal shredder designed and built for different uses. Its versatility consists in the crushing of: superficial soil with stones and rocks, bushes, pruning, undergrowth, service area, seed beds. The working depth is of about 40 / 80 mm. For a deeper depth it is sufficient to move the side skids upwards using the screws. The transmission is with belts. The drive shaft is supplied with ...
Manufactured by:Rolmex-Misiuda SP.J based inKielce, POLAND
The model NSKN is a strong and versatile mulcher for maintaining wasteland and areas difficult to access. This mulcher can be mounted on small and medium tracked excavators or excavators with tyres or on ...
Manufactured by:Nobili S.p.A. based inMolinella (BO), ITALY
Specialised mulchers for mulched stubble in grassy vineyards and orchards. SDS 150-180-210 series is tractor-mounted to be fitted to the three-point linkage of the rear tractor lift and gives the possibility to shred grass,or grassy cultivations and to discharge mulched product into windrows under plantation trees. ...
Manufactured by:Niubo Maquinaria Agricola based inTorregrossa (Lérida), SPAIN
Special mulcher for grass and branches of up to 2 cm of diameter. 3 points linkage on massive bars zinc. Manual displacement by 2 positions. Gearbox with free wheel. Back roller of 140 mm of diameter with scraper. Set of lateral skates. Protective bands in iron. ...
Manufactured by:JCBL Agri India based inMohali, INDIA
Working Width(Meter): 1.82, ...
Manufactured by:Fedele Mario based inLanciano (Chieti), ITALY
Mulcher "FEDELE THOMAS" for laying and tamping of plastic or paper films, even in soils aiuolati or raised beds. It stands out thanks to the four rotating concave disks that allow it to perform an excellent job of strong opening of the groove and tamping of the film with minimum effort and greater resistance to wear by exploiting to the maximum the space between one step and the ...
Manufactured by:Acma srl based inOSTRA VETERE (AN), ITALY
The THA model is suitable for cutting grass and maintaining parks and gardens. The machine can be used in the rear position of the tractor. It has fixed ...
Manufactured by:Nobili S.p.A. based inMolinella (BO), ITALY
Mulchers suitable for low-power tractors from 35 up to 65 HP. The new series BE 14 – 16 – 18 - 20 combines compact design with a professional concept, underlined by innovative construction solutions and the use of special materials to reduce the weight. ...
Manufactured by:Niubo Maquinaria Agricola based inTorregrossa (Lérida), SPAIN
Special mulcher ideal for working with grass, vine shoots and branches of up to 3-4 cm of diameter. Fixed linkage. Gearbox with free wheel. Back roller of 150 mm of diameter with scraper. Jagged line of counter hammers. Reinforced iron protective bands. ...
Manufactured by:FACMA s.r.l. based inVitorchiano (VT), ITALY
The model BVE permits to obtain a higher grass crumbling than the model BPEL. The BVE model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. Bonnet in anti-wear domex iron, structural steel with high resistance. The hitch is available with manual or hydraulic side shift. Powered by tractors from 40 HP to 110 HP. BVE/RV: the BVE/RV model can ...
Manufactured by:Kadıoğlu Makine San. Tic. Ltd. Şti. based inKestel, TURKEY
Kadioglu DP220 multipurpose, strong side mulcher. Working width is 220 cm. Thanks to it's low designed body and hydrolic system it can work so close to trees. Shredder part is forged steel and body is solid. It's ready for bad ground ...
Manufactured by:Niubo Maquinaria Agricola based inTorregrossa (Lérida), SPAIN
Special double hydraulic pick-up feeder mulcher with an internal knives rotor for shredding in olive groves, citrus, wide spanning crops, for which it is indispensable to shred very finely and ...
Manufactured by:Boleo based inChangzhou, CHINA
Boleo ® Mulchers offers great durability and reliability, provides the performance, uptime and confidence required for large scale, time sensitive right-of-way and site preparation applications, suited for high flow skid steer loaders and excavators up to 20T, perfect for clearing firebreaks, park and forestry trail maintenance, vegetation management, and remediation, debris ...
Manufactured by:Berti Macchine Agricole S.p.A. based inCaldiero (Verona), ITALY
Mulcher for vineyard, suited to mulch grass and pruning up to Ø 3-4 cm. for tractors from 25 to 55 HP. Its extreme low body is ideal to work on vineyards with small stems. Standard equipment: fixed 3-points linkage, Cat. I., free wheel in the gearbox, adjustable levelling roller, forged and hardened BERTI hammers (blades on request); counter-blades; collecting rakes. ...
Manufactured by:Manavoğlu Makina based inErenler, TURKEY
The tractor-mounted mulcher, developed by MNVAgro Tarım Makinaları İmalatı, is a robust agricultural implement designed for efficient management of orchard, cornfield, sunflower, and cotton residues. It features a three-point hitch system for easy attachment to tractors and operates at 1700 rpm, ensuring effective mulching operations. ...