Show results for
Refine by
Locations
- Europe
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia & Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Greece
- Hungary
- Iceland
- Ireland
- Italy
- Kosovo
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- Northern Ireland
- Norway
- Poland
- Portugal
- Romania
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Turkey
- Ukraine
- United Kingdom
- Vatican City
Sheep And Goat Backing Gate Equipment & Supplies In In Europe
46 equipment items found
Manufactured by:The Power Group based inDungarvan, IRELAND
This control unit is capable of managing 3 channels from 1 pump. The channels can be operated manually or can be set to operate at hourly ...
Manufactured by:Shanghai LEVAH International Trading Co.,Ltd. based inShanghai, CHINA
For fast installation of flexible gates and partitions on pastures, drive paths, passage ways and paddocks, polyrope or polytape restract automatically and are protected inside the housing. Mounting accessories and gate handle are ...
Manufactured by:Samson Agro A/S based inViborg, GERMANY
All SP-Spreaders are fitted with double, vertical beaters. These were designed in collaboration with end users for the application of heavy and compact materials. Therefore the SP-concept is an excellent choice for high amounts of output. The spreader can be fitted with a fixed lower deflector as well as a distribution device for lighter materials. The low tractive effort required leads to ...
Manufactured by:Samson Agro A/S based inViborg, GERMANY
All SP-Spreaders are fitted with double, vertical beaters. These were designed in collaboration with end users for the application of heavy and compact materials. Therefore the SP-concept is an excellent choice for high amounts of output. The spreader can be fitted with a fixed lower deflector as well as a distribution device for lighter materials. The low tractive effort required leads to ...
Manufactured by:Flory Industries based inSalida, CALIFORNIA (USA)
The Flory CP8700 Self-Propelled Conditioner can reduce drying time, avoid foreign material surcharges and reduce trucking costs. Experience harvest from start to finish with quality Flory equipment & ...
Manufactured by:Samson Agro A/S based inViborg, GERMANY
All SP-Spreaders are fitted with double, vertical beaters. These were designed in collaboration with end users for the application of heavy and compact materials. Therefore the SP-concept is an excellent choice for high amounts of output. The spreader can be fitted with a fixed lower deflector as well as a distribution device for lighter materials. The low tractive effort required leads to ...
Manufactured by:Samson Agro A/S based inViborg, GERMANY
All SP-Spreaders are fitted with double, vertical beaters. These were designed in collaboration with end users for the application of heavy and compact materials. Therefore the SP-concept is an excellent choice for high amounts of output. The spreader can be fitted with a fixed lower deflector as well as a distribution device for lighter materials. The low tractive effort required leads to ...
Manufactured by:Samson Agro A/S based inViborg, GERMANY
All SP-Spreaders are fitted with double, vertical beaters. These were designed in collaboration with end users for the application of heavy and compact materials. Therefore the SP-concept is an excellent choice for high amounts of output. The spreader can be fitted with a fixed lower deflector as well as a distribution device for lighter materials. The low tractive effort required leads to ...
Manufactured by:Delta Manufacturing, Inc. based inNewport, ARKANSAS (USA)
Delta Manufacturing offers you a wide variety of choices with the 500 Series. It comes in lengths up to 18 feet in the bumper pull model and 20 feet in the gooseneck version. The escape door is flush with the sides, and a back gate with 1/2 slider and center gate outside latch release are standard. The pressure-treated wood floor is screwed to the frame crossmembers. The fenders and roof are ...
Manufactured by:Teemore Engineering Ltd. based inEnniskillen, UNITED KINGDOM
Fully Galvanised. 1.9m long. Heavy duty design. Bolts directly to a wall. Can be fitted back to back on dividing gate. 70mm bar spacing. Suitable for all livestock ...
Manufactured by:Moly Manufacturing Inc. based inLorraine, KANSAS (USA)
TurretGate is an advanced gate design that shuttles back through the Turret, re-positioning behind waiting animals. It eliminates the need to swing the gate back open into the waiting animals and virtually eliminates the need for humans to be in with the cattle. The gate is controlled remotely and significantly reduces the stress on animals, compared to the old-style manual crowd gates that ...
Manufactured by:Norden Mfg LLC based inNorth Bloomfield, OHIO (USA)
The innovative design of the accumulator allows it to be fully automatic without the use of hydraulics or electronics. Using excess energy from the baler plunger, the bales are pushed up and out the top of the twisted chute that rotates them one quarter turn to put them on edge. There is no extra pressure applied to the plunger and the chute does not deform the bales. As gravity moves the bales ...
Manufactured by:Norden Mfg LLC based inNorth Bloomfield, OHIO (USA)
The innovative design of the accumulator allows it to be fully automatic without the use of hydraulics or electronics. Using excess energy from the baler plunger, the bales are pushed up and out the top of the twisted chute that rotates them one quarter turn to put them on edge. There is no extra pressure applied to the plunger and the chute does not deform the bales. As gravity moves the bales ...
Manufactured by:Norden Mfg LLC based inNorth Bloomfield, OHIO (USA)
The innovative design of the accumulator allows it to be fully automatic without the use of hydraulics or electronics. Using excess energy from the baler plunger, the bales are pushed up and out the top of the twisted chute that rotates them one quarter turn to put them on edge. There is no extra pressure applied to the plunger and the chute does not deform the bales. As gravity moves the bales ...
Manufactured by:Murray Machinery Ltd based inTarves, UNITED KINGDOM
The Murray Push Off Buckrake comes in two different versions, one is dedicated to Telescopic Handlers and one is to suit the front of rear linkage of tractors. The Tele Handler version consists of a rigid back frame constructed from heavy duty box section, with a row of 1500mm long heavy duty tines along the bottom. The 'push off gate' is hinged from the top of the back frame, the gate also has a ...
Manufactured by:Topcalf - a brand by Schrijver Stalinrichting B.V based in, NETHERLANDS
The Topcalf calf pen system consists of a basis pen, which can be extended with extension pens. An extension pen basically consists of one separation wall and a divisible front gate. The modular Topcalf calf pen system makes it very easy to assemble or disassemble the extension ...
Manufactured by:Flory Industries based inSalida, CALIFORNIA (USA)
The Flory CP87 Conditioner helps nuts dry faster and evenly while reducing trucking costs and avoiding foreign material surcharges. Experience harvest from start to finish with quality Flory equipment & ...
Distributed by:R Capper Ltd based inOxfordshire, UNITED KINGDOM
The High Flow Backing Gate is an electronically controlled backing gate made from high quality galvanised steel to withstand the harshest working conditions, yet is designed to not harm the cows, and this proven design has been installed in over 230 UK farms. Being electronic, you do not need to walk back and forth to the rear of the collecting yard to gather more cows; a push of a button from ...
Manufactured by:VES-Artex. A Turntide Company based inChippewa Falls, WISCONSIN (USA)
Protecting your calves is easy with the pen-to-pen isolation offered by Artex Calf Zone Pens. More suited for temperate and colder climates, our pens protect calves from drafts and coming into contact with animals in adjoining pens. Whether you are mounting to a structural wall or in stand-alone rows, Artex Calf Pens are fully customizable with a variety of wall length’s, back wall options, ...
Manufactured by:Condon Engineering Ltd based inCollon, IRELAND
Chequer plate floor for front 8 foot. Second section rotates into a pair of 8 foot sections for transport. 3 point linkage and pallet fork attachments. Semi-Auto gate and slam back gate as standard 2 bar c-section gate. ...