Linn - Model TBP552201 -Deep Pump Aerator

The deep aeration pump offers an effective solution for water depths over 5m. The pump component can be hung beneath the float down to a depth of 5 m. AH that is required is a normal buried drain pipe of nominal 150 mm diameter. Tnis pipe is available in different lengths, and can be cut according to the existing water depth. Simply attach one end of the pipe on the pump outlet, and the other to the underside of the float using the pipe clamps provided. For additional security, the pump is attached to the float by a special steel wire rope (included).

The deep pump aerator draws water from deep to the surface. The way the water is ejected at the water surface depends on the outlet type preferred, selected at the time of ordering. The simple pipe outlet gives a directional jet. As an alternative, if the conical deflector type is chosen, the result is a `mushroom`-shaped fountain pattern, like that produced by the Aqua-Pilz suomersibie.

The pump used for this aerator is the same as the Pipe Pump L3. For technical specification, please refer to the Pipe Pump details on page 38 + 39.

• ensures the mixing of colder deep water with warmer surface water
• pump component can be hung beneath the float down to a depth of 5m
• water output mushroom-shaped or with directional water jet
• available in 3 sizes - 0.55/0.75/1.1 kW- water del. max. 190 m3/h³/h