VYR - Model 16 -Low Flow Sprinklers
The sprinkler VYR-16 is a low flow sprayer with a special design to operate at different angles and under extreme temperature conditions. This is a male rotor 1/2" circular farm, made of plastic and has two references depending on the angle of mounting. Its axis and springs are made of stainless steel and O-rings and washers in stainless steel, Teflon and special polycarbonate to withstand contact with the most aggressive fertilizers in the market.
The wide range of plastic nozzles, with different colors for easy differentiation, offer a number of possible combinations. This sprinkler is designed to work under some flow ranges between 168 and 1450 l / h, at pressures between 1 and 3.5 bar, with a coverage range between 21 and 24 meters in diameter. The sprinkler VYR-16 can work with one or two nozzles; The main nozzle has 26° inclination to the horizontal plane and the secondary 8º. Its average rotation time comes to be approximately 40 sec. / 360 (2 BAR, 4.40 x2, 40 mm). For optimum uniformity coefficient our technicians recommend using it with a spacing between sprinkler heads and lines of 5x5 meters to 10x10 meters rectangular frames, 4x4 and 9x9 feet to meters triangular frames. The most common use is for grains such as wheat, barley or corn, alfalfa, beets, leafy robust, legumes and tubers.
- Range distance: 10 - 12 m.
- Flow: 168 - 1450 l/h.
- Working pressure: 1.5 - 3.5 bar.
- Area: Full circle.
- Nozzles: Two nozzles, one long range (2 - 3.6 mm) and one short range (2.5 - 3 mm) (2.4 x 2.5 mm standard).
- Colour-coded “click“ bayonet nozzles.
- Trajectory angles: 26o and 8o.
- Maximun height of waterjet: 2.8 m and 1 m (low angle).
- Rotation time: Depending on the pressure and the nozzles, the rotation will be constant and continuous (adjustable).
- Uniformity coefficient higher than 90% in areas of 8x8R, 8x10T.
- Riser-mounted low flow sprinkler.
- 1/2” male connection.
- Made of plastic and stainless steel.
- High-resistance rotating joints.
- Adjustable spring tension system to vary the rotation speed depending on the pressure.
- Variable multifunction arm so the same sprinkler can be used as a medium angle model (26º main and 8º secondary), or as a low angle model (8º main and 26º secondary).