Delimbe - Model T11 70 LitresS-NC8424819-REF/T11.3-80 - Salt Spreader

• Working width: 4 meters.
  
  
• It is supplied with a control box in the cabin which makes it possible to adjust the rotational speed of the flow rate.
  
  
• Adjustable salt / sand flow with graduation from 0 to 30.
  
  
• All aluminum unit and 70, 120 polyethylene tanks.

Use:

• To be placed at the back of the vehicle (utility vehicle, small truck ...).
  
  
• Suitable for dry or wet salt.
  
  
• Speed of use between 5 and 15km / h.

Options:

• Potentiometer to vary the spreading width of salt between 2 and 4 meters.
  
  
• Possibility of modulating the plate/disc to direct the spreading to the right or to the left.
  
  
• Different types of attach possible depending on the capacity of the hopper chosen: 3-point hitch, self-carried on ball, trolley.

Dimensions of the device:

T11 70L: Width: 650 mm / Length: 1000 mm / Height: 850 mm / Empty weight: 25 kgs.

T11 120L: Width: 650 mm / Length: 1000 mm / Height: 900 mm / Empty weight: 30 kgs.

Composition: Marine aluminum chassis and polyethylene tank.

*Advice:

• Used as a preventative at 7g / m², the capacity of the tank allows to salt a road of 6600m by 4m wide without filling the tank.
  
  
• Used as a preventative at 10g / m² the capacity of the tank allows to salt a road of 5000m by 4m wide without filling the tank.
  
  
• In curative at 15g / m² (dose not to be exceeded) the treated surface is 3330m for a 4m wide road. An increase in dosage is not a guarantee of better efficacy (it is often the water that is missing most).
  
  
• 7 to 10 g / m² are enough for prevention, 10 to 15 g / m² for curative. In addition, it is better to spread 2x15 g / m² than 1x30 g / m².