Teamco - Model T-Series -Spreaders

1. Hydraulic jack
2. Ball hitch
3. Y-shaped (dual) or centered (single) low-spreading nozzles
4. Hydraulic weight transfer
5. Grouped grease banks
6. Disk or drum brakes
7. Hydraulic adaptor to brake with the tractor’s pedal
8. Choice of flotation tires (23.1x26 up to 850/50x30.5)
9. 540 or 100 rpm impeller
10. Flow regulator
11. LED work lights
12. Unloading or transfer arm (hyd. or manual)
13. Custom decals
14. Choice of colors for the spreader
15. Safety chains
16. Raised loading funnel
17. Recirculation kit
18. Spreading or incorporating toolbar
19. Rocks trap

• The Teamco impeller is angled forward to minimize the driveshaft working angles.
• It can be taken apart quickly with its 4-points fastening and its sliding support.
• Moreover, its high quality bearing and seal system is lubricated trough an oil bath complete with a level indicator.

• The simplest and safest steering system on the market, even at high speed.
• The driver does not need to turn on or off the Teamco steering system.
• This feature is independent and is not connected to the tractor’s hydraulic system. This way, the tractor’s oil will not heat up.
• Having less parts (no gearbox, push rods, bearings or driveshafts) the Teamco system has a minimal maintenance cost.

The offset wheelkingpins, a unique Teamco feature, allow the wheels to freely follow the moving tractor, even if the steeing hydraulic system is damaged.

The driver can operate the brakes by hand, from one of tractor’s oil outputs.

Also, if the tractor is equiped with a hydraulic brake output, the driver can brake only using his pedal, hence having the spreader brake along with the tractor.

Teamco offers two hitch systems; a pin hitch and a ball hitch.

The Teamco spreaders have the longest suspension stroke on the market, with 16’’ cylinders. This provides for the best suspension travel.

The independent frame can be used along with other equipments such as the BGE Teamco dump box.

The tank itself can be moved 6’’ on the frame, frontward or backward. This feature allows adjustment of the weight placed on the tractor’s drawbar.

The heavy duty Teamco frames are equipped with lateral reinforcements.

Use the same frame for hay and corn silage, and also for your spreading operations.