VYR - Model 26 -Low Flow Sprinklers
The sprinkler VYR-26 is a low flow sprayer specially designed to operate at different angles and under extreme temperature conditions. This is a male rotor 1/2" circular farm, made of plastic and has two references. Its axis and springsare made of stainless steel, and O-rings and washers in stainless steel, Teflon and special polycarbonate to withstandcontact with fertilizers more aggressive in the market.
The wide range of plastic nozzles with different colors for easy differentiation, offer a number of possible combinations. This sprinkler is designed to work under flow ranges between 0,4 - 5,5 GPM (168 and 1450 L/H), at pressures between 1 and 3.5 bar, with a coverage range between 66-80 ft. (21-24 m.) of diameter. The sprinkler VYR-26 can work with one or two nozzles; The main nozzle has 26° inclination to the horizontal plane and the secondary 8º. His average rotation time comes to be approximately 40 sec./rot. (30 PSI / 2 BAR, 4.40 x2,40mm).
For optimum uniformity coefficient, our technicians recommend using this with a spacing between sprinkler heads and laterals of 33x33 ft. (10x10 m.) in rectangular frames, or 40x40 ft. (12x12m.) in triangular frames.
The most common use is for grains such as wheat, barley or corn, alfalfa, beets, leafy robust, legumes and tubers.
- Range distance: 10 - 12 m.
- Flow: 168 - 1450 l/h.
- Working pressure: 1.5 - 3.5 bar.
- Area: Full circle.
- Nozzles: Two nozzles, one long range and the other short range (2.5 x 2.5 mm standard).
- Trajectory angles: 26o and 18o.
- Maximun height of waterjet: 3,0 m.
- Uniformity coefficient higher than 90% in areas of 10x10R, 12x10T meters.
- Riser-mounted low flow sprinkler.
- 1/2” male connection.
- Made of plastic and stainless steel.
- High-resistance rotating joints.
- Quick-coupling bayonet nozzles, color-coded for easy identification.
- Height: 12 cm.
- Width: 12 cm.
- Weight: 51 gr.
- Units per box: 300
- Weight per box: 15 kg.
- Threads in BSP or NPT under demand.
- Standard assembly or with frost protection cover, as requested in the order.
- Self-compensating flow control valves of 1.5 and 2 bar.
- Device with “part circle click“ connection to the secondary nozzle to turn this model into a part circle sprinkler.
- Assembled as a “complete support kit“ on a 1.3 m galvanized stake with microtube and connectors.