Grape Presses (Viticulture) Equipment

Della Toffola - Presses with Closed Tanks

Della Toffola’s presses with closed tanks combine exclusive technical solutions that make them extremely high-performing, as well as guaranteeing qualitatively excellent results. The presses with closed tanks are suitable for producing all kinds of wine and particularly indicated for red and rosé wines because the maceration process with the grape skins can take place directly inside ...

By Della Toffola SpA based in Signoressa di Trevignano, ITALY. from Grape Presses Product line

Milani - Model PRM 650 and 850 - Continuous Grape Presses

The continuous PRM 650 and 850 grape presses are designed for the most demanding tasks. Of sturdy manufacture, they deliver quality pressing and high performance right to the ...

By Milani s.r.l. based in Conselve (PD), ITALY. from Wine - Pressing Process Product line

I-Tek - Vibrating Grape Sorting Tables

Vibrating tables suitable for sorting and sieving the grapes before ...

By I-Tek srl based in Marsala (TP), ITALY. from Oenology - Grapes Selection Product line

Mori Tem - Peristaltic Pump

The peristaltic pump is suitable for the processing of wine, whole, pressed and stalked grapes and marc. Its functioning is based on the rotating rolls pression principle, where, the product is pushed away to the exit by pressing progressively a rubber tube. The alternation between compression and relaxation of the tube allows the continuous flow of the product into the system and consequently ...

By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments- Pumps Product line

Enomet - Model NE250 and NE400 - Belt Elevator with Supports

Belt elevators carry grape bunches, destemmed grapes or fermented pressed grapes. The Belt elevators are tracked and supplied with 4 wheels, 2 of them being turning wheels, for the shifts to be easier. They can be provided with several lengths according to the need and supplied in current production with hydraulic piston controlled by a manual pump for the height regulation. The conveyer belt is ...

By Enomet Impianti S.r.l. based in Calcinelli, ITALY. from Receipt Grapes Product line

Lancman - Model VSPX / VSPX Plus - Grapes Press Machine

Performed for pressing grapes, apples into juice, wine… Easy to work with, man must only connect the press with the water supply from the house (simply with the plastic hose). There is needed pressure for normal press work 2,5 or 3 bar (depend from press model). Press procedure is easy, fast and efficient…There is needed to do one press from 15 minutes… Light construction, ...

By Gomark d.o.o based in Vransko, SLOVENIA. from Fruit Press Product line

Gelgoog - Model GGZP - Juice Extractor Machine for Factory Use

If you want to do the business of ginger juice, our Ginger Juice extractor machine is a very suitable choice. The ginger juice making machine can automatically separate juice and pomace. It is great helpful for your ginger juice ...

By Gelgoog Machinery Co.,LTD based in Zhengzhou, CHINA. from Juicing Machine Product line

Normit - Grape Processing Equipment/ Wine Production Line

Winemaking - is the process of production of wine by fermentation of grapes or other fruits. The winery can be divided into two main groups: Still wine (no carbonation), sparkling wine (with ...

By Normit s.r.o. based in Malacky, SLOVAKIA. from Food And Beverages - Wine-making - Technological Lines Product line

PnZeta - Pneumatic Presses

The Pneumatic Presses "PnZeta" are entirely built in AISI 304 stainless steel. Any high quality components that we use (e.g. Becker compressors, Bonfiglioli reduction units etc.) are standard, and are pivoting, braking ...

By Zambelli Enotech s.r.l. based in Camisano Vicentino (VI), ITALY. from Fruit Processing Equipment - Fruit Press Product line

Bucher Maestro - Process Pneumatic Presses

With Bucher Maestro option, your Bucher XPert press can carry on the 4 phases of a complete cycle automatically: feeding, pressing, emptying, cleaning. A special software and adapted equipment ensure Bucher Maestro ...

By Bucher Vaslin based in Chalonnes-sur-Loire, FRANCE. from Grape-Presses - Bucher & Sutter -Bucher - Pneumatic Presses Product line

Madrina - Model 50 - Grape Stalk Remover - Pressing Machine

MADRINA 50 stalk remover-pressing machine is projected for a soft processing of the grapes; receiving hopper can be supplied with feeding screw or with direct skid to the holed basket. It is equipped with telescopic legs to be fitted into selection lines and with electronic inverter to change RPM. It has double holed stainless steel rotating basket, adjustable rubber paddles beater, motorized ...

By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments- Stalk Removing Pressing Machines Product line

Della-Toffola - Model DTMA - Grape Maceration Accelerator

The wine making machinery with new exclusive technologies to improve the winemaking process. The DTMA is a new machine that reduces the dimensions of crushed grape skins, considerably increasing the surface area of the film in contact with the juice. This speeds up the maceration process, allowing the pressing stage to be brought forward, improving the extraction of polyphenols and anthocyanins ...

By Della Toffola SpA based in Signoressa di Trevignano, ITALY. from Destemmers-Crushers and Crushers Product line

CME - Destemmer - Crushers

The destemmer-crusher is a machine used to process the grapes that arrive in the cellar, both the one picked by hand and the one picked mechanically. The main function is to de-stem the grapes or separate the berries, the good part, from the stalks, or the part of waste. After destemming, the berries pass through the crusher where they are broken, effectively starting the fermentation ...

By C.M.E. s.r.l. based in Campagnola Emilia (RE), ITALY. from Products Product line

CME - Elliptic Rotor Pumps

With the experience of over 40 years in the field, C.M.E. offers a wide range of elliptical rotor pumps characterized by: The elliptical rotor pump is a volumetric pump where a screw feeds an elliptic rotor which, by means of a non-return valve, advances the product by ...

By C.M.E. s.r.l. based in Campagnola Emilia (RE), ITALY. from Products Product line

TAV-C - Grape Selection line

Selection table for ...

By VLS Technologies based in San Zenone degli Ezzelini, ITALY. from Receiving, crushing and pressing Product line

NTA-C - Grape Transport and Receiving

Belt for grape ...

By VLS Technologies based in San Zenone degli Ezzelini, ITALY. from Receiving, crushing and pressing Product line

Grifo - Model PMNI - Mini Stainless-Steel Grape Crusher

Grape crusher for small grape is characterized by stainless steel hopper and screw, and varnished steel frame. This is the smallest grape crusher in all Grifo’s production. It’s a machine easy to use and handy, thanks to its high-quality materials and attention to details. Underneath the hopper there’s a steel varnished support; the rotation is allowed by a handwheel which sends ...

By Grifo Marchetti Enologiche s.n.c based in Piadena Drizzona (CR), ITALY. from Enology Product line

CM - Winery Screw Elevators and Conveyors

C.M.E. produces screw elevators and conveyors for wineries. All the plants are made internally and are suitable for any type of material: grapes, marc, stalks, lees and other. We guarantee a turnkey installation service. ...

By C.M.E. s.r.l. based in Campagnola Emilia (RE), ITALY. from Oenological Plants Product line

TIP - Model 1O03 - 3 Litres Table Fruit Press

The hand press is used to press the juice from crushed apples, grapes, currants and other fruits. Fruit, including grapes, must be crushed before pressing. The collecting bowl with the drain hole is also the base of the press. The wooden basket and base are made of beech wood. The screw is attached through the base and passes vertically through the center of the wooden basket. ...

By TIP, spol. s r. o. based in Prostejov, CZECH REPUBLIC. from Fruit Presses and Mills - Fruit Presses - Manual Fruit Presses Product line

Delta - Model 30/R - Vine Stalk Remover - Pressing Machine

The Delta 30-R stalk remover-pressing machine has been designed particularly for small, top quality wine makers. The machine comprises a hopper for receiving the grapes with an auger for transferring them to stalk removing, which takes place by a beater with adjustable rubber blades. After stalk removal the product falls onto two rubber rollers where soft pressing takes place; under the rollers ...

By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments - Pressing - Grape Stalk Removing Machines Product line