Grape Pumps (Viticulture) Equipment

Marc - Model G6-150 - Pump for Grapes

Ideal for marc or for not particularly fluid products, rotor D. 300x150, it is also suitable for the transfer of whole and de-stemmed grapes, with adequate pipes reaching large heads of 10 m. in height or 50. m. in distance. Reclinable stainless steel hopper to obtain smaller height dimensions, it is complete with stainless steel auger protection grid. Stainless steel openable cone with hinges, ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

Marc - Model G6-150S - Pump for Grapes

Elliptic rotor PUMP, maximum containment of dimensions, the pump for grapes and marc G6-150S, rotor D. 300x150, has an hourly capacity (140 ql/hour). Fixed stainless steel hopper, complete with stainless steel auger protection grid. Bolted discharge cone with side inspection hatch, for cleaning and control of the pump interior, Ø 100 stainless steel garolla joint. Stainless steel wagon ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

Mori Tem - Peristaltic Pump

The peristaltic pump is suitable for the processing of wine, whole, pressed and stalked grapes and marc. Its functioning is based on the rotating rolls pression principle, where, the product is pushed away to the exit by pressing progressively a rubber tube. The alternation between compression and relaxation of the tube allows the continuous flow of the product into the system and consequently ...

By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments- Pumps Product line

Model T6 - Grape Hopper With Pump

The T6 hopper is produced in two standard versions: 3x2 m and 4x2 m entirely in AISI 304 stainless steel, satin finish and tig welding for a perfect seal. The tank is built with a particular asymmetric inclination of the walls, which makes the product descent highly effective and avoids formation of the bridge on the cochlea. Complete with pump for grapes that allows discharging at up to 8/10 of ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Hoppers Product line

Marc - Model G6-220 - Elliptic Grape Rotor Pump

It is ideal for whole and destemmed grapes, with very wide passages (300x200), low rpm (45-57). It guarantees maximum respect of the grapes. It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product avoiding breaking of the stalks and crushing of the skins and grape pips. It can also be used for fermented ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

Model G2 - Grapes Trailer eith Elliptical Rotor Pump

Ideal for the transportation of grapes, driven by the tractor shaft or by an electric gearmotor, it has the advantage of directly unloading into a crusher-stemmer or press, avoiding further passages in the tank. It can also be used in the agri-food sector for semi-solid products such as fruit, citrus fruits and olives. ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Trailers Product line

Normit - Grape Processing Equipment/ Wine Production Line

Winemaking - is the process of production of wine by fermentation of grapes or other fruits. The winery can be divided into two main groups: Still wine (no carbonation), sparkling wine (with ...

By Normit s.r.o. based in Malacky, SLOVAKIA. from Food And Beverages - Wine-making - Technological Lines Product line

Armbruster - Grape and Mash Pump

ARMBRUSTER Grape- and Mashpump /Feed hopperCapacity up to 100 t/h | with Mohnopump | Volume up to 20.000 ...

By Armbruster Kelterei-Technologie GmbH based in Güglingen-Frauenzimmern, GERMANY.

Marc - Model G8 - Pump for Grapes

For the transfer of grapes and marcs and semi-solid products. Ideal for whole and de-stemmed grapes, very wide passages 300x200, hourly production of 250 ql/hour with a low number of revolutions. It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product avoiding breaking of the stalks and crushing of the skins and grape ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

Milani - Mono Pump For Grape without Rasps

Pump made of stainless steel AISI 304 for de-stemmed grapes, complete with hopper with safety grille, rotating parts and feed screw stainless steel AISI 304, stator NBR rubber, semiraccordo Garolla DN80 (on request DIN 80), stainless steel trolley with wheels, panel with start / stop commands and control the temperature of the rotor. Thermal probe on the stator and temperature ...

By Milani s.r.l. based in Conselve (PD), ITALY. from Wine - Pump Product line

PVM - Whole and Crushed Grape Pump

Mono ...

By VLS Technologies based in San Zenone degli Ezzelini, ITALY. from Receiving, crushing and pressing Product line

PMH-Vinicole - Grape Crusher

The grape crusher is the equipment which bursts the grape berries during the crushing operation. PMH Vinicole offers a range of three models with a crush flow from 5 to 25 tonnes/hour and which adapt to the different types of equipment able to receive the ...

By PMH Vinicole based in Montanay, FRANCE. from Winery Equipment Product line

Taylor - Grape Harvester

Pull Type Harvester. For Single Trellis Vineyard. Electric-over- Hydraulic Controls. 45 HP Tractor PTO Hydraulic Pump. Harvest grapes on your ...

By Taylor Manufacturing, Inc. based in Elizabethtown, NORTH CAROLINA (USA).

Oenopompe - Multi-Functional Helical Lobes Wine Pump

Barrel filling, racking, transfer, filtering, bottling, thermovinification. Our wine pump with flowmeter (innovation 2015) can pump everything: juices, wines, alcohol, lees, musts, de-stemmed grapes, high temperature juices, cleaning products.Designed to provide the best pumping quality and to resist the demanding conditions of winery work, OENOPOMPE® is distinctive for its innovative helical ...

By PMH Vinicole based in Montanay, FRANCE. from Winery Equipment Product line

Enomet Gioia - Model 15 – 30 – 40 - Destemmers

The destemmers with a built-in pump can be identified as a low output per hour machine with clearly defined characteristics. Its frame is bicomposed yet can be opened. It has combined removable stainless steel cage so that the machine is easy to check and ...

By Enomet Impianti S.r.l. based in Calcinelli, ITALY. from Receipt Grapes Product line

CME - Destemmer - Crushers

The destemmer-crusher is a machine used to process the grapes that arrive in the cellar, both the one picked by hand and the one picked mechanically. The main function is to de-stem the grapes or separate the berries, the good part, from the stalks, or the part of waste. After destemming, the berries pass through the crusher where they are broken, effectively starting the fermentation ...

By C.M.E. s.r.l. based in Campagnola Emilia (RE), ITALY. from Products Product line

REARS - Model Pul Blast - Versatile Trailer Type Sprayer

A versatile trailer type sprayer with axial flow blower housing. Units are available in 75-600 gallon sizes. Fan diameter options include 24', 28', 32', and 36'. Built on a rugged 5' channel ...

By REARS MFG. CO. based in Eugene, OREGON (USA). from Air Blast Product line

PMH-Vinicole - High Performance Grapes Pump

This equipment is powered by an electric motor and, along with the pump, makes up a versatile pumping unit known as “motopump”. The grapes pump can be used for every type of ...

By PMH Vinicole based in Montanay, FRANCE. from Winery Equipment Product line

Marc - Model G7 - Pump for Grapes

G7 PUMP for grapes (patented) 50 ton/hour, optimum performance and maximum reliability For the transfer of grapes, marc and semi-solid products (citrus fruit, fruit, oranges, olives, olive-pomace, meat, fish, prickly pear figs, , dates). It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product with wide passages without bottlenecks. High ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

CME - Elliptic Rotor Pumps

With the experience of over 40 years in the field, C.M.E. offers a wide range of elliptical rotor pumps characterized by: The elliptical rotor pump is a volumetric pump where a screw feeds an elliptic rotor which, by means of a non-return valve, advances the product by ...

By C.M.E. s.r.l. based in Campagnola Emilia (RE), ITALY. from Products Product line