Only show results available in Virginia? Ok

Slurry Storage Equipment

  • Conor - Standard Tankers

    The standard range of slurry tanks come in 1100 gallon to 2100 gallon. They come mounted on a rigid drawbar and heavy duty ADR axle with a range of wheel options. Wheel options include 385/65 R22.5, 425/65 R22.5, 1300 x 530 x 508 BN3 and 21.3 R24. The high quality 8000 litre Battioni vacuum pump comes as standard with a secondary trap (with drain ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Tandem Axle Tankers

    Conor tandem axle tanks are designed and built with strength and safety in mind. The unique chassis design and tandem parabolic suspension keeps the overall height low and gives excellent stability. The high speed parabolic suspension and strong chassis are ideal for travelling at high speed. A large range of wheel options are available to choose ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Fully Recessed Tankers

    The Conor range of fully recessed LGP tankers are strong and robust and built with the contractor and large producer in mind. Sizes range from 1600 Gallon up to 3000 Gallon and comes with many features as standard such as large 30” rear door, 11000 litre vacuum pump, 20 foot suction hose, full commercial axles with 420 x 180 brakes, LED road ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Slootsmid Trailing Shoe

    The Conor Slootsmid Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. The tank, the trailing shoe and the axle are integrated as closely as possible which gives excellent balance and maneuverability. The trailing shoe has a fully galvanized body and a powerful hydraulic macerator which ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Economy Trailing Shoe

    The Conor Economy Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. It has a simple lightweight design and is designed very close to rear of tank and can fit on any tank. It allows for the even application of slurry which contributes to even growth. It greatly increases grass yield in ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Model 1000/600 - Slurry Separator

    The Euro-P separator (slurry separator) meets even the highest requirements, manufactured in full stainless steel design with high durability of all parts in contact with the slurry.The sophisticated rugged design allows for applications in demanding and challenging operating conditions at industrial and agricultural sites.The compact device 'Type ...

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from Slurry Separator Product line

  • Model ER2-S - Slurry Manure Pump

    ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm.

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from PTO Pumps Product line

  • Model 4000L - Slurry Tanks

    The slurry tanke type T 507 / 3 at capacity 4000 liters is a completely equipped machine ready to work. It doesn’t need any additional equipment to work. The vehicle is available in four versions: MINIMUM, STANDARD, CLASSIC and PREMIUM. MINIMUM version has a compressor at capacity 3000 L / min, and a pouring spoon with the splash plate. It ...

    By Pomot Ltd based in Chojna, POLAND. from Slurry Tanks Product line

  • Refrigerated Potato Box Store

    In the autumn of 2014 Bennett & Co completed a 4000tonne refrigerated potato box store for Patrick Dean Ltd.  The brief was to build a store with four storage areas within the existing farmyard as part of their significant potato growing enterprise.  The design needed to incorporate storage for both ware and seed crops in separate ...

    By Bennett & Co (Crop Storage Engineering) Ltd based in Norfolk, UNITED KINGDOM.

  • Agronic - Slurry Tanker

    Agronic slurry tankers are made for professional users. Thanks to the unique chassis and tank design the centre of gravity is very low.This make the machine very stable when spreading on hilly ground. Ground clearance is still 40 cm (15.75”)..Placing the tank in front of the axles ensures that there is always sufficient weight on the ...

    By Agronic Oy based in Haapavesi, FINLAND. from Slurry Tankers Product line

  • Pompe Ferrari - Model SC Series - Slurry Tank Decompressors

    Besides the slurry tank decompressors development, these alternative sliding vane compressors are suitably employed for the self-propelled sprinkler pipe emptying. On request, it could be outfit of high thermal resistance vanes. A oil-bath twin-gear multiplier increases the rotary motion of the motor power takeoff (PTO 540 RPM). Automatic standard ...

    By Pompe Ferrari s.n.c. based in Novellara (RE), ITALY. from Compressors/Decompressors Product line

  • Model T Series - Slurry Tankers

    All KIRCHNER slurry tankers can be delivered with vacuum-pump, worm type pump, rotary-piston pump or vacuum-centrifugal pump. All tanks are produced in the own work Anzenhof, outside and inside hot galvanized and protected with a colorless coating outside. Construction tankers for all usual means of transporter types or for the assembly on trucks ...

    By KIRCHNER & SÖHNE GMBH based in Statzendorf, AUSTRIA. from Slurry Technology Product line

  • Single Axle Slurry Tanker

    This range is designed for users who do not require a large tank capacity. This type of equipment is selected according to two main criteria: short distances (0 to 6km) between the filling and spreading points and a moderate volume of effluents to be used.

    By PICHON S.A. based in Guipavas, FRANCE. from Slurry Tankers Product line

  • GARANT - Model PT 18.500 Poly - Two-axle Slurry Tankers

    Drawbar suspension, lower hitch with ball button system Scharmüller with a nose weight of 3 t.Rotary piston pump Vogelsang with rotacut 10000 (optional).Parabolic suspension or air suspension in conjunction with original BPW axles up to 60 km/h.Heart-shaped tank up of polyester, support with big wheel salient.Dead load with rotary piston pump ...

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Slurry Technology Product line

  • Inner Walls

    Inner channel walls made of precast parts - quality and precision. Following the trend towards new systems in agriculture, Greten developed a new product series: inner channel wall modules. Until now slurry basements have always been made using conventional methods of construction. Noticeable uneven spots in the bearing surface for the slat panels ...

    By Alfons Greten Betonwerk GmbH & Co. KG based in Essen, GERMANY. from Slurry Basement Product line

  • Model RMB - Slurry Tank

    A complete range of reliable machines that can solve all the problems of transportation of slurry.For an efficient and effective utilization according to specific needs, are available various accessories, thanks to our these innovative slurry distribution and slurry injector systems satisfy the current multiple needs.

    By Grazioli Remac srl based in Calvisano (BS), ITALY. from Slurry Tanks Product line

  • Tramspread Tanker Booms

    The hydraulic folding TRAMSPREAD Tanker Booms are built to a high quality and are fully galvanised. Attaching booms to most makes of tanker is a simple operation. Mounted by a 4-point fixing to the slurry tanker and a 6' tank outlet, the TRAMSPREAD 6m Dribble/12m Twin spread nozzle Combination Bar is one machine capable of performing two duties. ...

    By Tramspread based in Mendlesham, UNITED KINGDOM. from Slurry Tankers Product line

  • Bossini - Model B4 400 - Slurry Spreader Tank

    Tank capacity 40.000 liters. Air brakes, hydraulic or both air/hydraulic. EC European Certification. Patented hydraulic suspension with new torpress 3 sectors with rings and multilayer membrane for heavy use. New connecting pipes increased Ø 65 mm. Nr.4 increased axles with 10 industrial holes and increased brakes. First and fourth steering ...

    By Bossini srl based in Carpenedolo, ITALY. from Slurry Spreader Product line

  • Enamelled Steel Slurry Tank

    Uncomparable capacity and performance. The use of enamelled steel in constructing cesspools makes them far superior to anything that is currently on the market. The innumerable qualities of enamelled steel make the cesspools waterproof and resistant, and they can be used for a long time. So long, in fact, that its' exterior or interior will never ...

    By Silo J.M. Lambert inc based in Drummondville, QUEBEC (CANADA).

  • Kimadan - Slurry Mixer

    Plane mixers – Tower mixers – Height-adjustable tower mixers KIMADAN offers a wide range of tractor-coupled SLURRY MIXERS. The T35 PLANE MIXER is designed for slurry tanks and channels which are below ground level or have drive ramps. The TOWER MIXER is designed for agitation in storage tanks and deals effectively with all slurry ...

    By Thyregod A/S based in DENMARK. from Kimadan Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you