Eschlbock Maschinenfabrik GmbH products

The specially designed chipping rotors of the Biber 5 series mean that, depending on the model, the chip length can be accurately adjusted from 0.5 to about 12 cm. The system of stationary feed rollers and the angle of the knives make for energy-saving chopping performance, even at maximum branch diameter.  Continuous working is guaranteed by the patented parallel guides between the movable feed rollers and the knife wheel – no risk of the ends of branches getting stuck. Your work is made easier by the large, low and user-friendly feed chute, with safety bars on the sides and upper edge of the chute, in compliance with the latest safety regulations, to ensure safe and reliable loading, even of unwieldy shrubs and branches. Specially designed discharge impellers mean the wood chips can be thrown out further. Sharp knives at all times! You can sharpen them at any time while you’re out at work, thanks to the sharpener fitted as standard to the machine.

The Biber 92 model is characterised by its convincing efficiency and perfect performance. It is ideal for processing timber of up to 75 cm in diameter. Its feeder with a width of 122 cm can handle even unwieldy material and efficiently process it. The chipping roller, exceeding 1m in diameter, with its 10 respectively 20 chipping knives or optional blades, along with its large screen, produces as well precise fine as coarse chips, size of G50 or G100, for industrial furnaces. The new multi-purpose chipping rotor consists of high-strength and low-wear materials and is distinguished by intelligent patented screw links. It is especially persistent, easy in maintenance and service reduced.

These machines have their own hydraulic systems, independent of the towing vehicle, which allows for a powerful feed system through two horizontal rollers with rows of sharp teeth.

Sophisticated technology – high-performance and smooth runningThe high centrifugal mass of the Eschlböck chipping drum, with its 8 knives offset in pairs, guarantees smooth running and a relatively low power requirement. The electronic feed control that comes as standard enables you to work continuously, even with a small towing vehicle, and increases throughput. The powerful hydraulic system (on the Biber 7 plus extra power comes as standard) and the robust V-belt transmission make for a powerful in-feed system. In addition to the sturdy knife arrangement, there are also other quick-change blades available for chopping soft wood and shrub clippings.

Biber 78 is the newest model of the new chipper generation. Equipped with the newest chipping technology, it produces perfect fine wood chips, but also coarse chips. In the medium size segment, it exceeds all expectations concerning power and quality of wood chips. It is also ideal for eliminating scattered woodpiles in an effective and economic way. The infeed system works aggressively when processing brushwood as well as round timber up to 60 cm in diameter.

The Biber 2 series is ideal for chopping offcuts from tree surgery, overgrown bushes, vines etc.

The Biber 83 Z/ZK is mounted on a tandem drive axle and is driven by the tractor’s power take-off shaft.

The Biber 84 Z/ZK is mounted on a tandem drive axle and is driven by the tractor’s power take-off shaft.

The RBZ series is a classic from Eschlböck, based on the proven MAN TGS 6x6 chassis with 510 hp. With the quality of the chopped material and its off-road capability – coupled with a compact design – many contractors became leaders in biomass production with an RBZ. With the Biber Powertruck, Eschlböck set another milestone in chipper technology: a single-stage transmission for maximum power!

The Biber 85 Z/ZK is mounted on a tandem drive axle and is driven via the tractors power take-off shaft.