EXPOM sp. z o.o. products

LECH combined cultivator is designed for pre-sowing cultivation. The combined cultivator is used for loosening the top layer of soil, breaking and crushing lumps of crusted layers of soil and pressing the soil surface to assure better permeability of groundwater. The unit is particularly useful for growing plants that require levelled fields.

WICHER combined cultivator is designed for pre-sowing cultivation. The combined cultivator is used for loosening the top layer of soil, breaking and crushing lumps of crusted layers of soil and pressing the soil surface to assure better permeability of groundwater. The unit is particularly useful for growing plants that require particularly levelled fields before sowing seeds, for example, before point sowing of sugar beets. Adequately adjusted unit allows you to prepare the field for sowing after one pass.

TORNADO combined cultivator is designed for pre-sowing cultivation. The combined cultivator is used for loosening the top layer of soil, breaking and crushing lumps of crusted layers of soil and pressing the soil surface to assure better permeability of groundwater. The unit is particularly useful for growing plants that require levelled fields before sowing seeds, for example, before point sowing of sugar beets.

GRYF field cultivator is designed for intensive farming, causing excellent soil mixing, levelling and preparation for sowing. The cultivator can be used on various types of soils.

GOLIAT disc cultivator is designed for soil cultivation. The operation of disc cultivator is performed by two rows of offset discs, which arrangement causes aggressive cutting through the entire soil during the pass. It can be used for cultivation of the soil with well-crushed crop residues and short stubble field. Rotating discs cut through the soil and intensely mix plant residues and straw. Each tractor equipped with the cultivator must be fitted with a set of front axle weights.

AJAX skimming cultivator is designed for post-harvest cultivation. The operating elements of the machine include wing coulters that undercut and mix crop residues. Coulters are mounted on 85 cm long standards that provide very high clearance under the frame, which prevents clogging with crop residues. A row of discs with a diameter of 460 mm, installed on special shock-absorbing springs, is mounted behind the two rows of tines. Then, the field is concentrated and levelled with a tubular roller.

GROM stubble cultivator is designed for the treatment of flat surface soil layers, immediately after the harvest – causes faster germination of crop seed and weed residues, enables rapid decay of crop residues and retains moisture in the soil. The remains of grains and weed seeds germinate best when the soil is cultivated quite shallow after the harvest. Also the straw more easily turns into humus when the stubble is mixed at a small depth.

ORLIK cultivation & seeding cultivator is designed to cultivate with grain drill on its own ground wheels. It is used for cutting ridges, shredding manure and breaking up sods on fallow lands, as well as sowing, which significantly reduces cultivation time. The unit is particularly useful for cutting and crushing sodded ridges, shredding green manures and mixing mineral fertilizer with the soil. It is also possible to perform skimming (without the drill), but under the condition that the field is not covered with couch grass and cutting of runners of couch grass will not create a better environment for their growth.

Soil rolling is a very important agricultural procedure which significantly affects the quality of the crops and subsequent harvest.

Soil rolling is a very important agricultural procedure which significantly affects the quality of the crops and subsequent harvest. The applied state-of-the-art HYDRO-PRESS system provides even pressure of all the sections of the roller to the soil. The rollers are equipped with the following rings: