Only show results in Virginia? Ok

Hay Handling equipment for Crop Cultivation

  • Premium

    FINN - Model B260 - Straw Blowers - Shreds and Blows 20 Tons of Straw Per Hour

    Designed for the maximum in performance and operator convenience, the B260 Straw Blower is the standard by which straw and hay mulching equipment should be measured. With the highest material capacity in the industry (up to 20 tons/hour), the B260 will handle the toughest material, yet continue to perform at high levels of both production and ...

    By FINN Corporation based in Fairfield, OHIO (USA). from Straw Blowers Product line

  • Apache - Feeder Wagon

    University trials show that nearly 35% of all hay fed is wasted! Apache Feeder Wagons are very maneuverable, incorporating a tight turning radius and extendable tongue for easy hook-up. Our patented vertical flexible inner rack system allows the wagon to flex on uneven ground.

    By Bison Industries Inc based in Norfolk, NEBRASKA (USA).

  • Model 8020HD - Twin Screw Corner Door Trailer

    Door configuration: right corner door . Driveline: 1000 rpm 602 2 speed gearbox 1:1 1:1.5 std pto. Shifter cable: shifter handletires: 245/70/19.5 10 bolt duals. Knives: 16 standard knives. Auger: 3/4' tornado auger. Hay extension: 9' hay extention (standard). Scale model: ez 2500v scale indicator.

    By Penta TMR Inc. based in Petrolia, ONTARIO (CANADA). from Heavy Duty Mixers Product line

  • Model 918 - Heavy Hay Rake

    Made in Canada, the Jiffy hay rake is built heavy to minimize flexing, sag and sway even under the heaviest raking and rougher field conditions. Staying strong and solid while working in the field, this hay rake helps you ensure working height and width won’t budge, allowing you to rake faster and minimizing dirt in the windrow. Our rakes ...

    By Renn Mill Center Inc. based in Lacombe, ALBERTA (CANADA). from Jiffy Products Product line

  • Vermeer - Model TM1200 - Trailed Mower

    The heavy-duty, center pivot TM1200 trailed mower cuts an impressive 15' 6'/4.7 m, but folds neatly in half for transporting to the next field. Cutterbars are staggered and overlapped for complete cutting action down the middle. To lower maintenance needs, each of the 12 discs is self-contained with its own set of gears, bearings and lubricants ...

    By Vermeer based in Pella, IOWA (USA). from Trailed Mowers Product line

  • WIFO - Model BST-38 - 3-Point Hitch Bale Spears

    3 Point bale spear (model BST) with a capacity up to 2000 lbs, available in Category I and Category II. Comes standard with two anti-roll tines.

    By A.M.S. Incorporated based in Ogden, ILLINOIS (USA). from Hay & Grassland Equipment Product line

  • Hay Feeders for Goats, Sheep & Small Animals

    24' x 22' x 9' Hayrack fits over 1 1/2' Thickness

    By Little Mountain Steel Fabrication based in Myerstown, PENNSYLVANIA (USA).

  • DIGI - Model 2000 - SOLOMIX FEEDER

    DIGI EZ2400 WEIGHING SYSTEM 1.7 REDUCTION GEAR BOX ELECTRIC OPERATION. ELECTRIC CONTROLS ELECTRIC SPEED CONTROL. STEEL HAY RING, REAR PREMIX DOOR, 20MM AUGERS, 2.4M VLH UNIT, LIGHTS, 435/50R19.5 WHEELS. AVAILABLE FOR DEMO PLEASE CALL STUART ADAMS ON 07917 754479

    By Smallridge Bros Ltd based in Devon, UNITED KINGDOM.

  • Matériel Agricole-Matériel de fenaison-Andaineur 4 soleils

    Matériel Agricole-Matériel de fenaison-Andaineur 4 soleilsMatériel Agricole-Matériel de fenaison-Andaineur 5 soleilsMatériel Agricole-Matériel de fenaison-Andaineur 8 soleilsMatériel Agricole-Matériel de fenaison-Andaineur 10 soleils

    By Agrozenit Agricultural Equipment based in Selcuklu / Konya, TURKEY. from Hay Equipment Product line

  • Handle Hay and Dump

    Cannonball’s patented dump feature expands your capabilities to handle hay and dump materials from the comfort of your cab. There is no other unit on the market like it. Our patented feature permits the same hydraulic system to be used for both arm and dump functions. With our feature-rich bed you gain much more value for our dollar. Arm ...

    By Cannonball Engineering, LLC based in Kingman, KANSAS (USA).

  • Model 8020HD - Twin Screw Front Door Trailer

    Door configuration: front door. Conveyor: dual discharge conveyor. Driveline: 1000 rpm 602 2 speed gearbox 1:1 1:1.5 std pto. Shifter cable: shifter handle. Tires: 245/70/19.5 10 bolt duals. Knives: 16 standard knives. Auger: 3/4' tornado auger. Hay extension: 9' hay extention (standard). Scale model: ez 2500v scale indicator

    By Penta TMR Inc. based in Petrolia, ONTARIO (CANADA). from Heavy Duty Mixers Product line

  • Model RV2R - RV2R-S Series - Double Rotary Tedders Hay-Turner

    Speed, high quality and maximum handling capacity are the main features of the RV2R-RV2RS rotary tedder-hay-turners. This machine has been perfected for hay-making due to its precise handling of hay and its extreme flexibility. The RV2R and RV2RS rotary tedders-hay-turner spreads aerates and forms central and lateral windrows. All these functions ...

    By Giaccaglia Giuliano & C. S.N.C. based in CERBARA, ITALY. from Mowers and Rotary Tedders Product line

  • AgriCompact - Model 42 - Square Bales, Diesel Motor

    This COMPACT HAY DRYER has been designed for the harsh climatic conditions of Northern Europe. This COMPACT Hay Dryer with heat recovery dries 42 square bales and consists of 3 rows and can be loaded and unloaed by a telescopics from 1 side. This COMPACT model's fan works with a DIESEL motor. This COMPACT model uses thermical energy due to 2 ...

    By AgriCompact Technologies GmbH based in Bingen am Rhein, GERMANY. from Compact Hay Dryers In Concrete Construction Product line

  • AgriCompact - Model 80 Square - Bales, Diesel Motor

    COMPACT Hay Dryer with heat recovery built with a grid made of concrete and an insulated greenhouse which dries 80 square bales of forage. On the load-bearing grid customers can drive with their tractors/telescopics. This COMPACT model's fan works with a DIESEL motor and is equipped with a combustion chamber of adequate power.

    By AgriCompact Technologies GmbH based in Bingen am Rhein, GERMANY. from Compact Hay Dryers In Concrete Construction Product line

  • Northwest - Hay and Forage Tiller

    Prepare your field for seeding in no more than two passes with Northwest’s Hay and Forage Tiller and save time, fuel and energy. Providing a superior seed bed in less time, you won’t find a tool better than this to cut your overhead and increase your bottom line. It’s heavy duty rotors and blades allow a finer cut and the front ...

    By Northwest Tillers, Inc. based in Yakima, WASHINGTON (USA). from Hay & Forage Product line

  • Model 5710 & 5910 - Hay Fluffer Tedder

    The Bauman Hay Fluffer Tedder is designed to gently lift and release hay with minimum leaf damage. The Fluffer Tedder gives you better control over how your hay dries, no matter how you put it in, and allows air to move through your hay for faster drying time so the cure is uniform.

    By Bauman Manufacturing based in Elmira, ONTARIO (CANADA). from Other Products Product line

  • Hay Bale Handler

    Berlon's hay bale handler efficiently handles both wrapped and unwrapped square bales or round bales. The smooth, curved surface of the arms lets you move bales without tearing or puncturing wrappers. The Berlon bale handler is controlled by hydraulics that let the operator get the arms around and securely hold a bale. Wrapped bales are best ...

    By Berlon Industries, LLC based in Hustisford, WISCONSIN (USA). from Attachments Product line

  • Bach-Run HayMaster - Hay Conditioner

    Hay conditioners speed up drying times—sometimes by a whole day—enabling you to get your hay in faster. Bach-run HayMaster's intermeshing steel rollers ensure maximum stem breakage, causing your hay to release it's moisture quicker. Our steel conditioner rollers are compressed with heavy duty coils. HayMasters are an affordable ...

    By Bach-Run Farms based in Listowel, ONTARIO (CANADA). from Hay Conditioner Product line

  • Applegate Livestock - 14 Gauge Hay Feeders

    46' tall - 8' diameter. 14 gauge steel frame. Available with or without the panel option. 1-1/4' diagonals and vertical bars. 15 vertical bars on open feeder. Hardware included. Ultra-protected powder coat bright red

    By Applegate Livestock Equipment Inc based in Union City, INDIANA (USA). from Feeders Product line

  • Model 24TATRD36-3C - Hays Tender Equipment

    Extra Payload. Greater Slope on Hoppers. Hydraulic Operated Main Doors and Clean Out Doors. Hydraulic Vibrators. Covered Hydraulic Hoses

    By Hays Liquid Transport Inc based in Camilla, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you