Only show results in Virginia? Ok

Planters Equipment

  • Ploughs Reversible Ploughs

    This plough connects to the tractor via the tool carrier. The knife culter to makes the vertical cut and the mulboard (plough brest) turns the furrow. There is a full range of adjustments for depth, tilt and furrow width. Reversible ploughing is easier than conventional ploughing, as it allows you to plough in both directions by rotating the ...

    By BSG Supplies Ltd. based in Marks Tey, UNITED KINGDOM. from Two Wheel Tractor Implements Product line

  • Sigma - Model 5 - Precision Pneumatic Planters

    Sigma 5 is the precision pneumatic planter for different soil conditions: tilled soils, with minimal tillage or no tilled soils (with residues of previous crops). The construction strenght and quality, its simple and versatile operation join with its sowing reliability at speeds of up 10-12km/h. The system with double discs on dual levelling ...

    By Sfoggia Agriculture Division S.r.l. based in Montebelluna (TREVISO), ITALY. from Seeding Product line

  • K-Hart - Furrow Closer

    The K-Hart furrow closer was developed specifically to alleviate the problem of uneven soil placement overtop of the seed rows on the back row of the air drills or cultivator. When using direct seeding equipment, especially double shoot openers, soil is thrown out of the seed trench far enough that it does not flow back in properly. The furrow ...

    By K-Hart Industries Ltd. based in Elrose, SASKATCHEWAN (CANADA).

  • Sunflower - Model 1436 - Selling Disc Harrows

    Residue management tillage has become one of the necessities of higher yields. Heavy residue, particularly corn residue can negatively impact next year’s crop in many ways. Heavy residue remaining in the spring will insulate the soils keeping them cold and wet further into planting time and delay planting. Today’s high yielding ...

    By Sunflower Manufacturing - part of AGCO Corporation based in Beloit, KANSAS (USA).

  • PLMS - Single-Row Mechanical Planter

    The machine is carried and can have from a 3 to 15 elements beam and 2 drive wheels. Each element is attached to the beam by a paralellogram system. It is made of: a chassis, a share, a plate with 16 bulblets holders, a hopper, two depth setting wheels and an agitator. The plates are synchronised with the drive wheels, and each spoon closes as it ...

    By ERME s.a.s based in Montégut-Arros, FRANCE. from Planters Product line

  • PLMD - Double-Row Mechanical Planter

    The machine is carried and can have from a 3 to 10 elements beam, a single hopper and 2 drive wheels. Each element is attached to the beam. It is made of a chassis, a share, two plates with 32 bulblets holders, two depth setting wheels and an agitator. The plates are synchronised with the drive wheels, and each holder closes as it passes through ...

    By ERME s.a.s based in Montégut-Arros, FRANCE. from Planters Product line

  • Front Mounted Furrow Presses

    Front mounted furrow press FP 27-900 with a working width of 5,00 m

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Furrow Presses and Packer Product line

  • Model FP 16-900 - Front Mounted Furrow Presses

    Front mounted furrow press FP 16-900 with a working width of 3,00 m

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Furrow Presses and Packer Product line

  • Bermuda King - Row Planter

    The ROW PLANTER has been used successfully worldwide for quick coverage of Bermuda grass. This planter cultivates the ground and helps eliminate unnecessary grasses and weeds while sprigging. It is ideal for planting pastures, hayfields, highway right-of-ways, water ways, soil conservation tracts and reclamation areas, sod and turf farms and golf ...

    By Bermuda King based in Kingfisher, OKLAHOMA (USA). from Bermuda King Planters Product line

  • Model 1008G - 8 Row Precision Pneumatic Planting Machine

    Precision pneumatic planting machines are mechanisms capable of placing seeds in the soil with desired row intervals and on row spacing. Row intervals can be adjusted between 27 cm and 90 cm, while on row spacing can be adjusted between 2 cm and 80 cm. These are combined models capable of fertilizing operation during plating. With suitable die ...

  • Model 3000, 4000 and 6000 series - 32 Row Pneumatic Grain Planting Machine

    3000, 4000 and 6000 series pneumatic grain planting machines are heavy duty planting machines, planting seeds in the ground by air pressure, with a seeding rate per 1000 m2 adjustable between 300 g to 40 kg. These machines can be manufactured with or without fertilizer reservoir according to customer option. 4000 pneumatic planting machine is a 4 ...

    By KöYMAK TARIM MAKİNALARI LTD ŞTİ based in Edincik, TURKEY. from Pneumatic Grain Plating Machine Product line

  • Crop Cover

    Open field crops are susceptible to frost damage in winters. AVBC has introduced the perfect solution to protect crops from frost damage in cold weather conditions. Our solution is called crop cover. Our crop cover is made from very economical fabric that prevents frost from affecting the plants under cover. At the same time the fabric allows ...

    By Agro Vision Biotech Consultants based in Jaipur , INDIA.

  • Model GVB520 - Pneumatic Metered Seed Planter

    The GVB520 seed planter injects a seed into the ground every half-second, approximately 7,200 hills per hour, either through plastic mulch covered beds, or directly into bare ground. For vegetable row crops where one to nine row configurations are required, planting heads may be positioned at any point along the length of the tool bar. All ...

    By Rocca Industries Pty Ltd based in Tolga, AUSTRALIA. from Seed Planter Product line

  • Model RTME-1100 - Semiautomatic Vegetable Transplanter

    The Renaldo Semiautomatic vegetable transplanter plants through plastic mulch covered beds at about one plant per second, per planting head. One row to six row (on three beds) configurations available. Easy to use carousel feed system requires one operator per planting head. The planting system is designed around our patented, award-winning ...

    By Rocca Industries Pty Ltd based in Tolga, AUSTRALIA. from Other Products Product line

  • Model PMB Series - Pneumatic Planters

    As being the poineer of the 'Planters' in Turkish Market,  Azim Ziraat Aletleri introduced the Universal Pneumatic Planters series PMB. PMB Series Pneumatic Planter can be easily connected to the tractor's three point hitch system and powered by a cardan shaft connected to the power take-off tractor. The machine is particularly suitable for ...

    By Azim Ziraat Aletleri based in Ortaklar, TURKEY. from Planters Product line

  • Model TP-68 - Toolbar Mounted Planter

    The TP-68 is a toolbar-mounted planter with parallel linkage flotation for following uneven terrain. Quick depth adjustment by moving a spring loaded pin, makes it the farmers 'friend'. The TP-68 is available in a close-row model (MD3R shown) which places seeds in parallel rows 9' apart. Research at Alabama University Experiment Station. Headland ...

    By Covington Planter Company based in Albany, GEORGIA (US) (USA).

  • Iseki - Model PZ Series - Rice Transplanter

    ISEKI rice-transplanter 'PZ60' is designed to offer efficient productivity by advanced features such as high speed transplanting at 1.6m/s.  It enables low vibration, low noise level and light weight for its Powerful 16ps OHV petrol engine. HST transmission allows gear shifting from forward and reverse without using the clutch, which leads to ...

    By Iseki & Co., Ltd. based in Matsuyama-shi, JAPAN. from Rice Transplanter Product line

  • John Deere - Model 1770NT 12Row30 - Drawn Planters

    The 1770NT Planters are among the most productive and adaptable planters on the market. These planters get you there, get the job done, and then get you to the next field. On the road, the 1770NT planters transport at a narrow 12 feet. Plus, the hydraulic system provides true 'fold and go' operation from the cab.

    By John Deere based in Moline, ILLINOIS (USA). from Drawn Planters Product line

  • John Deere - Model DB90 36Row30 - Drawn Planters

    The DB90 Planter can plant 36 rows on 30-inch spacing. It's only available with Pro-Series XP row units and can be equipped with the Central Insecticde System.

    By John Deere based in Moline, ILLINOIS (USA). from Drawn Planters Product line

  • PROSEM K - Model FIJA - Seed Drills Precision Planters

    Discs precision planter for all kind of seeds. With rigid frames that confers them an easy-use.

    By Maquinaria Agricola Sola SL based in Barcelona, SPAIN. from Precision Planters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you