straw machine Downloads

  • Premium

    Straw Blowers Brochure

    6’ 3-point 9/20" 25+ hp 1,200 lbs 4'-2" l x 3'-5" h x 5'-11" W 8’ 3-point 12/20" 35+ hp 1,500 lbs 4'-2" l x 3'-5" h x 7'-11" W 8’ Wheeled 12/20" 35+ hp 1,800 lbs 10'-5" l x 3'-11" h x 7'-11" W9281 lesaint driveFairfield, oh 45014-5457toll Free (800) 543-7166e-mail: sales@finncorp.com www.finncorp.comEfficient CoverageOf Many Profit ...


    By FINN Corporation

  • Premium

    B-260 Straw Blowers - Shreds And Blows 20 Tons Of Straw Per Hour Specification Sheet

    Model B260S t r a w B l o w e rB260 Straw Blower Straight Pull Trailer. (B260T)The FINN B260 Straw Blower is designed for maximum performance and operator convenience. It is widely considered the standard by which all straw and hay mulching equipment should be measured. With the highest material capacity in the industry (up to 20 tons/hour), the B260 handles the toughest material while ...


    By FINN Corporation

  • Chopping and Distributing Machine-Mini Straw

    NUOVO TRINCIADISTRIBUTORE DI PRODOTTI DA LETTIERA.Nuovo. Nuovo Design. Nuovo nelle prestazioni. A potenza ridotta sminuzza, sbriciola, sfibra,taglia a partire da 1 centimetro la paglia da lettiera, aumentandone l’assorbenza.NEW CHOPPER DISTRIBUTOR FOR BEDDING MATERIAL.New. New Design. Enhanced performance. Minces, crumbles and cuts straw bedding materialat low power starting from 1 cm, increasing ...


    By Crono s.r.l.

  • Straw-Shredder Brochure

    Cormall´s stationary RBS multi shredder shreds your straw economically  and efficiently, irrespective if you are using conventional, large or round ...


    By Cormall A/S

  • Straw Bale Breaker Brochure

    The Cormall MTX-H straw bale breaker is a new system based on our traditional diet feed mixer. The system allows you to break up the bale with a minimum of power consumption, lower noise, lower auger speeds and a minimum of wear and tear on the machinery. Consequently it is a highly durable system that can handle stones and other contamination in the straw, without any stops in ...


    By Cormall A/S

  • Straw Spreaders- Brochure

    HYDRAULIC DRIVENHYDRAULIC DRIVENFRONT-LOADING STRAW SPREADERSFRONT-LOADING STRAW SPREADERSWhere is a traditionknow-howWhere is a traditionknow-howOur options16 874532Front-loading straw spreader for loaders/telehandlers (rotating chute)Chute adjustable over a 300° rotation; for even straw spreadingup to 50 ft (15 m).(depending on oil ?ow)Our hydraulic-drive front-loading straw spreader for ...


    By Vandenburg Equipment Service

  • Straw Auger Datasheet

    Data Sheet marts 8, 2013 D:\\\\CHBPODE_2_104_Manjul\\\\Back-Up Folder - Old\\\\Jason Barker Extra Files-Manjul\\\\RENEW Energy Systems\\\\Data_sheet_Straw_Auger.doc Picture Machine name Straw Auger Machine function Auger for load control to the hammer mill, with gear motor Power konsumption kW 3.0, 4.0, 5.5 or 7.5 kW Measures H=650 mm, W=620 mm and L=1500 to 14000 mm Weight 250 up to 1260 ...


    By RENEW Energy Systems

  • Straw Drum- Brochure

    Damas A/S | Industrivej 2, V. Aaby | DK-5600 Faaborg | Tel +45 63 61 82 00 | Fax +45 62 61 68 51mail@damas.com | www.damas.comH A L M UStraw drumThe Halmu is used for raw material with much straw or largeparticles to be removed from the material before the finalprocess.The Halmu is of solid steel construction. The drum and feedroller are driven by a geared motor via chain ...


    By DAMAS A/S

  • Model MRS1 Dual - Straw Filling and Sealing Machine Datasheet

    Quick / Easy conversion from mini to medium or medium to mini straws. Reduced mechanical components. Standard equipment provides filling & sealing capability of both mini and medium straws. Quiet operation due to an electronically controlled stepper motor (No ratchets / No saw blade). Push-button reverse returns carriage automatically to the start position. Automatic stop at the end of the ...


    By IMV Technologies

  • Model 170 - Straw Bale Conveyor Brochure

    For automatic loading we recommand the Cormall BT 170 loading ...


    By Cormall A/S

  • Model C460 - Straw Blower & Bale Feeder Brochure

    The McHale C460 can be used to distribute bedding material quickly and efficiently leaving a thick aerated bed of straw. The McHale C460 can also be used to feed round bales of silage. The McHale C460 bale feeder & straw blower is a versatile machine, which can be used for feeding short fibre silage and can also be used to easily distribute long fibre fodder such as hay and ...


    By McHale Engineering Limited

  • Lely Welger AP For Baling Hay and Straw Brochure

    The perfect technologyfor baling hay and strawHigh Density Balers24Harvest results.A million cows are milked daily by Lely robotic milking systems but it’s not only the Astronaut that makes robotic milking such a success. It’s the knowledge and experience of our employees that help farmers to achieve the best results with their herds.That’s why we know – more than anybody else – that good quality ...


    By Lely Holding S.a r.l.

  • BREVA DP - Silage Feeder Straw Blower Dispenser Mounted Brochure

    Silage: Round silage shovel, 2 cylinders on the arms (cylinders and arms out of the body), 2 cylinders on the silage shovel. Shredding - Dispensing – Mulching: Shredding by blower and cone, Blower housing in anti-abrasive steel (Brinel 430 hb, 120 kg steel), Superior protection deflector with hydraulic control in front of the blower, Free wheel on blower, Gearbox 2 gears (feeding - ...


    By JEULIN

  • Tomahawk - Model 404-505-505XL - Straw Shredders Brochure

    Straw Shredders For straightforward bedding the 404/505/505XL range offers fast effective shredding of straw to a consistently short ...


    By Teagle Machinery Ltd

  • HELIOS DP - Silage Feeder Straw Blower Mixer Brochure

    Silo-unloading - Rounded shovel: 2 cylinders on arms, 2 cylinders on the silage shovel, Indicator of the shovel position, Water tightness plate on the shovel retractable by springs. Shredding - Feeding –Bedding: 1 shredder rotor mechanically driven by durable belt and automatic tightening equipped with 15 big blades predisposed to wrapped silage, Chamber with 2 retainers, Blower Ø ...


    By JEULIN

  • MCA - Automatic Machine Datasheet

    Safe: Manual packaging of frozen straws can damage semen. It is also a tiresome, monotonous and potentially risky task for the operator. The MCA, working in nitrogen vapors and partly in liquid at -196°C, improves the comfort of use, and allows the user to distribute the doses safely. The insertion of straws inside the visotubes is operated by a break-away pusher. Re-circulated liquid ...


    By IMV Technologies

  • Spandy - Model 3P - Self-Loading Multipurpose Machine Brochure

    Self-loading multipurpose machine for cleaning the ends stalls and renews bedding at the same time. connected by three-point linkage to the rear tractor lift (it may also be connected to the front buckets of tractors, telescopic cylinders, Manitous, Merlos, etc.) and driven by the hydraulic power take-off. It is possible to load various kinds of bedding into the tank according to needs (sawdust, ...

  • sand - Sandy loam - Model 48SX series - Rotary Spading Machines Brochure

    A totally new concept in rotary spading machines for sandy and light clay soils. The 48SX machine is faster, lighter and stronger than its predecessor. The latest changes means spading becomes even more attractive as the machine is also equipped with a seedbed preparator. Simultaneous primary and secondary tillage. In combination with a drill or a planter cost reductions are even ...


    By Imants BV

  • Model Spandy 1.8 - Multifunctional Self-Powered Machine- Brochrue

    Self-propelled multipurpose machine for cleaning the ends stalls and renews bedding at the same time. It consists of a chassis with four wheels, a front rotary brush and a self-loading tank. All the controls are accessible from the centrally positioned driving seat. Thanks to a hydraulic distributor, the front brush may be lifted and lowered, the tank may be raised and lowered, and the motors ...

  • Premium

    Ruf Maschinenbau GmbH & Co. KG Company Profile Brochure

    Welcome to RUF, your partner for sustainable cost optimisation! “Behind every machine is a human being. Behind RUF briquetting equipment are people who create added value.“ Hans Ruf, company founder Dear Customer, as a family business firmly rooted in mechanical engineering and in wood processing, we specialised in the economical use of raw materials from the very beginning. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you