OptiTrans Header Transporter Brochure

OptiTrans header transporter OPTIGÉP GÉPGYÁRTÓ ÉS KERESKEDELMI Kft. H–5630 Békés, Vésztoi út 1/1 • Tel.: +36-66/411-833 • Fax: +36-66/411-045 E-mail: optigep@mail.datanet.hu www.optigep.hu It is suitable for the road transportation of each adapter types manufactured by the OPTIGÉP Ltd., as well as most of the harvesting adapters. OptiTrans header transporter is suitable for the road transportation of each adapter types manufactured by the OPTIGÉP Ltd., as well as most of the harvesting adapters (sunflower, corn, etc.). It may be towed with the operating combine or an agricultural tractor. The towing speed may not exceed 15 km/h. The adapter should be loaded to and unloaded from the carrying transporter by the driver of the combine using the feeder of the combine. The header transporter is manufactured in basic and extended designs. Main properties The brackets are adjustable in a wide range. Their appropriate adjustment makes possible transportation of different combine adapters. The crossbeams’ angle is 0-20° relative to the ground, so the optimal attachment position can be reached. It is simple to disconnect the header transporter from the coupling hook of the combine or the tractor. The adapter on the vehicle is easy of approach with the combine and it is detachable without being held up by the feeder. Technical data Property Basic model Extended model Note Full length (from the center of the drawbar eye) - short drawbar 11000 mm 13400 mm The drawbar can be adjusted vertically up to 250 mm. - long drawbar 12000 mm 14400 mm Width 2476 mm 2476 mm Height - without adapter 1270 mm 1270 mm - with adapter max 2500 mm 2500 mm Clear height 260 mm 260 mm without load Front wheel track 553 mm 553 mm Rear wheel track 2220 mm 2220 mm Axle base 7920 mm 7920 mm Crossbeam angle 0-20° 0-20°