- Home
- Companies
- Grays Equipment
- Products
- Grays - Bale Spikes
Grays - Bale Spikes
The bale-carrying heavy duty main tine is of resilient forged spring steel, tapered along its length, and counter tapered for rigidity into a seating collar in the backframe.All Grays Bale Spikes are fitted with a 4ft (1.2m) long main tine with a usable length of 43" (1.1m). The stabilising tine protrudes 11" (280mm).
STANDARD BALE SPIKE
Grays Standard Bale Spike can be supplied without brackets for local fitting, with 3 bolt on brackets (as installed) for three point linkage, or with 4 bolt on brackets for pin fitting to loaders. It can be supplied with a range of welded hooks to fit loader quick attach systems and heavy duty brackets for industrial loaders and farm handlers
SLIP-FIT SPIKE
For use with Grays Pallet Fork, the Slip-Fit Spike slides onto the fork backframe and is held in place by a pin dropped through one of the locating holes in the top of the frame. The tine specifications are te same as the Standard Spike above
TWIN SPIKE
For front loaders or rear linkage grays Twin Spike is a low cost tool for rapid field clearance. The spikes are set 5`6" (1.76m) apart with one 4" (100mm) higher tthan the other. The fitting options are the same as for the single balespike.
REAR MOUNTED SPIKE
Grays Rear mounted Spike is a tough, low cost product for fitting to tractor rear linkage. The triangular backframe gives a choice of position for the linkage pins to ensure that the optimum operating angle is achieved.