Refine by
Samon Onion Equipment & Supplies
10 equipment items found
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The loader is equipped with one sieving mat, a hedgehog belt and a discharge. The jaws are equipped with a foam feed roller so that no onions are left behind at the end of the row. A single sieving belt with adjustable beaters ensures that the soil is cleaned off, while the mat is equipped with recessed bars to prevent onions from rolling backwards. An adjustable ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The second mat is wider than the digging mat to allow for sufficient cleaning. The second mat is fitted with recessed bars to prevent onions from rolling. The angle and speed of the hedgehog belt can be controlled from the tractor. The machine is equipped with star wheels for even filling of the discharge belt. The loader is equipped with a 3-part, lightweight, product-friendly ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The chisel harvesting machine comes with full-width chisels. The two corner chisels are larger. Above the chisels there is a flap that closes off the inputs at the end of the ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The disc harvesting machine was developed for clean harvesting in hard or heavy soil. The harvesting machine can harvest the onions in a very product-friendly way and without taking up too much soil. A hydraulically driven disc is mounted for each row. This means that only the ground where there are onions is ...
Distributed by:Duijndam Machines BV based inNieuwerkerk a/d IJssel, NETHERLANDS
Samon windrower-digger for harvesting ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The Samon 3-bed topper is designed to increase capacity so that more focus can be placed on the harvesting operation. The machine is equipped with three open toppers mounted in a folding frame. The topper comes standard with automatic depth control, ensuring accurate topping height. The topper is available in widths of 1.50, 1.80 and 2.00. The machine is equipped with a heavy-duty double bearing ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The harvester shaft is a driven 40 mm square shaft that rotates through the ground. This harvesting system turns over a minimum amount of soil. This system also ensures fewer clumps. As an option, the shaft of the harvesting machine can be boxed to improve the service life of the shaft ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The closed topper is a good machine for processing a lot of (green) foliage. The topper has 3 or 4 rotating shafts each with 2 blades that are placed obliquely, one behind the other. The haulm is discharged to the right side due to the positioning of the blades. The specially shaped outlet ensures that the foliage is blown into the tractor’s ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The open topper is designed so that it does not fill up with soil and foliage. The open topper is equipped with plates and seals all around. There are 3 or 4 rotating shafts with 2 blades each in the machine. The topper tops a full bed. The foliage that has been topped is shredded and thrown back into the ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
Samon’s three-bed onion windrower has been developed to increase capacity. In this model, three harvesting-axle harvesters are mounted in a drawn frame. The machine is equipped with a steered axle with automatic center position. An automatic depth control is placed on each harvesting element. This allows the lifting elements to follow the bed independently of each other. ...