Grape Stalks (Viticulture) Equipment

Marc - Model G6-150 - Pump for Grapes

Ideal for marc or for not particularly fluid products, rotor D. 300x150, it is also suitable for the transfer of whole and de-stemmed grapes, with adequate pipes reaching large heads of 10 m. in height or 50. m. in distance. Reclinable stainless steel hopper to obtain smaller height dimensions, it is complete with stainless steel auger protection grid. Stainless steel openable cone with hinges, ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

Mori Tem - Peristaltic Pump

The peristaltic pump is suitable for the processing of wine, whole, pressed and stalked grapes and marc. Its functioning is based on the rotating rolls pression principle, where, the product is pushed away to the exit by pressing progressively a rubber tube. The alternation between compression and relaxation of the tube allows the continuous flow of the product into the system and consequently ...

By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments- Pumps Product line

Delta Densilys - Densimetric Grape Sorting Table

This sorting table separates either machine-harvested or hand-picked grapes from floating MOG such as leaves, bits of stems, stalks but also bugs, unripe berries, pips, skins, dry and shot berries… by means of a permanent evacuation device.Flow rate: 4 to 6 T/h according to the desired level of separation. ...

By Bucher Vaslin based in Chalonnes-sur-Loire, FRANCE. from Grapes Reception - Delta - Grapes Sorting Product line

Revello - Model RPE - Electric Peristaltic Pump for Wine

The peristaltic pump is based on the principle of peristalsis according which the prevalence to the fluid treated is given by acrushing sliding along the pipe. With this method the more or less dense liquids are transported in a delicate and soft way. The pump is suitable for the pouring of liquids (wine, fruit juices, milk, and oil) and semisolid products (crushed and intact grapes, grapes after ...

By Revello Giovanni s.n.c. di Luigi & C. based in Santo, ITALY.

Marc - Model G6-220 - Elliptic Grape Rotor Pump

It is ideal for whole and destemmed grapes, with very wide passages (300x200), low rpm (45-57). It guarantees maximum respect of the grapes. It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product avoiding breaking of the stalks and crushing of the skins and grape pips. It can also be used for fermented ...

By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump Product line

CMA Dream Destemmer

THE DREAM DESTEMMER BY CMA IS FOR DELICATE GRAPE PROCESSING. The DREAM destemmer and autosorter has a unique design in destemming technology. By eliminating the rotary basket and spindle, the DREAM offers a new concept of oscillation grape selection. Post destemming is done with an auto roller selection table with adjustable sizing for precise berry selection. The DREAM is on an ...

By Prospero Equipment Corporation based in Pleasantville, NEW YORK (USA). from Wine - Cma Grape Processing Equipment Product line

OMAC - Model OPTIMA - Destemmer-crusher Machines

The destemmer-crusher machines in the OPTIMA range, have been designed for the soft pressing of the product. The machines are of modern conception and have special details such as the beater speed variator and also a basket in some model. Rubber rollers are adjustable by using two hand wheels and are also mobile. The sheeting of the drum (cage) is made in stainless steel with round countersunk ...

By OMAC enosoluzioni s.r.l. based in Corridonia (MC), ITALY. from Destemmercrushers Product line

Grape Stem Extractors

Grape stem extractors consisting of a steel runner with radial blades keyed directly onto the motor inside a metal or stainless steel worm screw. All models are powered to suit the quantity of grape stems to extract. DV grape stem extractors comply with current CE safety ...

By D.V. s.r.l. based in Cusano di Zoppola, ITALY. from Wine Machinery Product line

PMH-Vinicole - Grape Sorting Table

Belt or vibrating sorting tables, placed after de-stemming, are designed to eliminate petioles, stems, spoilt and shot grapes, and insects from the grapes. PMH Vinicole has two grape sorting tables models ...

By PMH Vinicole based in Montanay, FRANCE. from Winery Equipment Product line

Mantis - Picking Mechanism

Mantis is the leading trunk shaker picking mechanism in the industry. It is unmatched in its speed and effectiveness. The Mantis is designed to be used on cordon pruned vines especially quadrilateral trellis systems. The rails automatically adjust to the width of the vine trunk exerting a continuous force on the vine for smooth, fast, effective harvesting. Full contact rods can be added to the ...

By American Grape Harvesters, Inc. based in Fresno, CALIFORNIA (USA).

Model H180 3C - Marc and Harvesting Pumps

ALMA marc and harvesting pumps are of the screw-pump type, mounted on a undercarriage fitted with a brake. A rotor turning in a stator in full stainless steel, conveys the harvested grape at a sonstant rate, limiting crushing without damaging the stalks. ALMA pumps are factory-fitted with a contactor-cum-reverser with emergency stop and isolating switch, ensuring perfect ...

By Alma based in Saint-Paul-Trois-Châteaux, FRANCE.

Crendon - Single Sided Vineyard Sadie Sweeper

Vineyard SADIE is a pruning and leaf sweeper which clears prunings and debris from under fruit trees and vines, improving vinyard hygiene. It also removes weed clumps to give clean ground for pre-emergence herbicide ...

By Crendon Machinery based in Donnybrook, AUSTRALIA. from Sadie - Vineyard & Orchard Cane & Pruning Sweepers Product line

Enomet - Model TVD1 and TVD2 - Vibrating Grape Dosing Table

It is set before the sorting table, allows the grape to be measured out and arranged uniformly, helping the product selection. Grapes move forward thanks to the orizontal plate vibration; the plate is half length bored and it allows to get the exceeding must back and to carry out the first grape cleaning. Can also be used before the grape stalk removal to add grapes constantly and uniformly. It ...

By Enomet Impianti S.r.l. based in Calcinelli, ITALY. from Receipt Grapes Product line

Normit - Grape Processing Equipment/ Wine Production Line

Winemaking - is the process of production of wine by fermentation of grapes or other fruits. The winery can be divided into two main groups: Still wine (no carbonation), sparkling wine (with ...

By Normit s.r.o. based in Malacky, SLOVAKIA. from Food And Beverages - Wine-making - Technological Lines Product line

Vineyard Sucker Remover

Our sucker removers are the solution to your vineyard suckering needs. Our simple and robust solution to mechanical suckering is straightforward to use and adaptable to nearly any situation.STANDARD FEATURES: Adjustable head angle to effectively reach suckers at the base of each vine. Dual mounting position arms – run heads vertically for trunk suckering, horizontally for under cordon ...

By Agrishield LLC. based in Linden, CALIFORNIA (USA).

Madrina - Model 50 - Grape Stalk Remover - Pressing Machine

MADRINA 50 stalk remover-pressing machine is projected for a soft processing of the grapes; receiving hopper can be supplied with feeding screw or with direct skid to the holed basket. It is equipped with telescopic legs to be fitted into selection lines and with electronic inverter to change RPM. It has double holed stainless steel rotating basket, adjustable rubber paddles beater, motorized ...

By MORI-TEM Srl based in Tavarnelle Val di Pesa (FI), ITALY. from Wine Equipments- Stalk Removing Pressing Machines Product line

Pera Pellenc - Model H - Destemmer

The robust, reliable destemmers are designed for working with manual or mechanical harvests, and are easy to clean and maintain. “We have used PERA destemmers in our cellars for many years. They are reliable and robust and enable us to separate stems, leafstalks and leaves as well as foreign bodies from the grapes, without breaking the actual grapes. Our destemmer has a selector to choose ...

By Pera-Pellenc SA based in FLORENSAC, FRANCE. from Winemaking - Receiving Product line

Della Toffola - Model NDC - Grape Crusher Destemmer

Della Toffola’s NDC crusher destemmers guarantee a perfect, delicate separation of the grapes from the stems, retaining the quality of the crushed grapes in every situation. Conceived and designed to be extremely user-friendly, the standard fittings include solutions that make cleaning procedures quick and ...

By Della Toffola SpA based in Signoressa di Trevignano, ITALY. from Destemmers-Crushers and Crushers Product line

Enomet Gioia - Model 15 – 30 – 40 - Destemmers

The destemmers with a built-in pump can be identified as a low output per hour machine with clearly defined characteristics. Its frame is bicomposed yet can be opened. It has combined removable stainless steel cage so that the machine is easy to check and ...

By Enomet Impianti S.r.l. based in Calcinelli, ITALY. from Receipt Grapes Product line

CME - Destemmer - Crushers

The destemmer-crusher is a machine used to process the grapes that arrive in the cellar, both the one picked by hand and the one picked mechanically. The main function is to de-stem the grapes or separate the berries, the good part, from the stalks, or the part of waste. After destemming, the berries pass through the crusher where they are broken, effectively starting the fermentation ...

By C.M.E. s.r.l. based in Campagnola Emilia (RE), ITALY. from Products Product line