6 products found
Big Dutchman Products
-
Heating Systems
An ideal temperature in every poultry house. Ideal house temperatures have a substantial influence on bird health and performance. Adequate heating systems are therefore required in many climate zones. The overall goal is to maximise the thermal yield and transfer it to the birds in the best possible way to keep energy costs as low as possible. Big Dutchman offers several different heating systems powered by gas, oil or hot water and used with or without chimney.
-
JetMaster - Heating System
Main advantages: JetMaster is available for operation with natural gas or propane as well as fuel oil. It is controlled by means of a thermostat and equipped with a flame guard. If the heater does not ignite or the flame is extinguished, the gas supply is immediately shut down so that no unburnt gas escapes. The built-in fan provides a wide throwing range and distributes the warm air ideally in the ...
-
Gas Brooders for a Directed Supply of Heat
Main advantages: Gas brooders are especially well-suited if it is necessary to supply birds with intensive heat for a defined amount of time and in a specific area, such as turkeys, ducks, broilers or pullets during the rearing ...
-
Livestock Housing Hot-Water Convection Heaters
Main advantages: Convection heaters are becoming increasingly popular, since they significantly improve the house climate (reduced CO2 concentration in the house air). The objective is to maximise the heat output. This is achieved by a radiator with a large surface. The heating elements are either mounted directly beneath the air inlets (fin heater) to heat the incoming air, or they are suspended from the ceiling in the centre of the house ...
-
HeatMaster - Hot-Water Convection Livestock House Heater
Main advantages: HeatMaster works on a hot-water basis. Hot water is supplied by an oil-powered or gas-powered boiler. The possibility to use waste heat produced by a CHP or biogas plant is a great ...
-
Fin Heater System
The fin heater consists of an aluminium tube with epoxy powder coating through which hot water is pumped. Fins are welded to the tube like a spiral, creating a large surface of 1 m2/running metre of tube. Heat emerges from these fins and causes a strong thermal. The heat output can be as high as 600 watts/running metre. The spacing between the fins is large enough to ensure that dust does not accumulate. The tubes are fastened to the wall by means of ...
-
Infrared Heaters
Main advantages: Infrared heaters are a gas-powered heating system giving off radiant heat. This radiant heat can be compared with solar radiation as it passes through air without significant losses. This means that heat rays become active only where they hit a surface and are then converted into sensible heat. At cooler ambient temperatures, this creates a very comfortable temperature sensation for the ...