Show results for
Refine by
Locations
- Africa
- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cameroon
- Cape Verde
- Central African Republic
- Chad
- Comoros
- Congo
- Congo, Democratic Republic Of The
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Ivory Coast
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Rwanda
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- St. Helena
- Sudan
- Swaziland
- SãO Tomé & PríNcipe
- Tanzania
- Togo
- Tunisia
- Uganda
- Zaire
- Zambia
- Zimbabwe
Livestock Loading Chute Equipment & Supplies In In Africa
23 equipment items found
Manufactured by:G.A. Braun, Inc. based inNorth Syracuse, NEW YORK (USA)
Chute Load Open Pocket Washer/Extractors: Braun open pocket washer/extractors can be ordered for chute loading for fully automated wash rooms. This loading option removes the potential for serious injury to the operator from pushing bags into a moving washer cylinder. ...
Manufactured by:Moly Manufacturing Inc. based inLorraine, KANSAS (USA)
Moly's hydraulic load-out chute features a self-centering dock. The chute lifts from 10" to 58" off the ground, and the top deck stays flat with the man door. Includes stair steps for added safety and ...
Manufactured by:Provix Inc. based inLew Lowell, ONTARIO (CANADA)
Waterproof Monitor, 7 inch, Quad, wireless 2.4ghz ...
Manufactured by:Cleveland Cascades Ltd. based inStockton-on-Tees, UNITED KINGDOM
Cleveland Cascades Tanker Loading Chutes utilise the same vertical cone design, used in the C Series Free Fall Chute. The Free Fall principle is highly effective when loading in to the enclosed space of a Tanker. The system is fitted with a completely sealed closure cone which connects to the tanker ...
Manufactured by:Cimbria A/S - part of AGCO Corporation based inThisted, DENMARK
Basic model for loading grain, sugar, flour and similar products with moderate dust and wear ...
Manufactured by:CPM Europe BV based inZaandam, NETHERLANDS
High-density base frame. HTD or V-belt main drive with separate heavy-duty motor base. Automatic hydraulic tensioning inter-roll drive with optional differential ratios. Spherical roller bearings in massive sliding block housing. Large diameter hydraulic cylinders that permit high flaking forces with low hydraulic forces. Accumulators that dampen high-frequency vibration. High-quality chill cast ...
Manufactured by:Continental Biomass Industries, Inc. (CBI) based inNewton, NEW HAMPSHIRE (USA)
The 484VT Commercial Wood Chipper is powered by a 765hp engine for maximum production. Tracked configuration allows for easy maneuverability on site and optimal loading efficiency. The rotating discharge chute and 290° rotation minimize truck relocation during loading. Chutes are available in straight, flexible, or vertical configurations. Two rotor options available to produce fuel chips and ...
Manufactured by:Werk Weld Inc. based inArmour, SOUTH DAKOTA (USA)
This is a cattle loading chute built to handle your high traffic cattle facilities. This loading chute is designed to take the place of a traditional concrete loading chute, which you are unable to move. With this loading chute you can still move it from one location to another to accommodate your ever changing ...
Manufactured by:Cleveland Cascades Ltd. based inStockton-on-Tees, UNITED KINGDOM
The loading of dry bulk material into open vehicles, whether road or rail, is an area of the industry which is susceptible to problems of dust creation, material degradation and separation as well as over-filling and spillages. Cleveland Cascade loading chutes can provide an effective high performance solution to meet all of these challenges. Depending on the application and the material being ...
Manufactured by:BM&M Screening Solutions Ltd. based inSurrey, BRITISH COLUMBIA (CANADA)
The BM&M Rotary Star Chip Feeder is used in wood chip applications to provide surge control, consistent feed rate, and full width distribution of chips across the infeed of a ...
Manufactured by:LASKI, s.r.o. based inSmržice, CZECH REPUBLIC
The chipper LS 160 P Track is a compact machine intended for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass, for chipping of redundant timber such as sticks, deals, pickets etc. and also for manufacture of chips from aforesaid materials. It can dispose all these materials with diameters up to 160 mm. Its turnable upper frame part is equipped with a swivel base so ...
Manufactured by:Rammy LTD based inToivala, FINLAND
The Rammy Snowblower 120 ATV is a versatile and efficient snowblower designed to attach to all-terrain vehicles (ATVs). Its compact design ensures minimal impact on the ATV's maneuverability, making it suitable for areas like small gardens and long driveways. The snowblower operates effectively even in wet snow conditions due to its unique MDS technology. It features a dual snow auger and a ...
Manufactured by:Vohl Inc based inSaint-Marc-des-Carrières, QUEBEC (CANADA)
Chromium carbide skid shoes Chromium carbide multi-sections scraper blade Chromium carbide impeller casing Chromium carbide loading chute Extendable loading chute from 3353 to 4039 mm (132 to 159 in) from ground Hydraulic-electric tilt loading chute Female quick coupler Wireless control box Wireless emergency stop for the signaller Removable control box for ...
Manufactured by:Ross Manufacturing Co,Inc. based inBrownsville, TENNESSEE (USA)
The Ross Vertical Mixer is a great solution for farmers who want control of mixing their own feed, cooperatives, milling facilities, and grass seed mixing facilities. Ross Vertical Mixers come in above floor and below floor styles with three capacities available. Each mixer is custom designed to meet the needs of the customer and include 12 Ga. barrel construction and door access to the mixing ...
Manufactured by:Cimbria A/S - part of AGCO Corporation based inThisted, DENMARK
Safety and clean environment in one product. Cimbria Moduflex loading chutes are designed for dust-free outloading of dry bulk material. The loading chutes can be supplied for tanker trucks, flatbed trucks, open and closed rail wagons and containers. The chutes can be manufactured in a more sturdy construction for shiploading, stockpiling and warehousing, depending on customer requirements for ...
Manufactured by:Vohl Inc based inSaint-Marc-des-Carrières, QUEBEC (CANADA)
Overall height: 3353 mm (132 in). Overall width: 2908 mm (114.5 in). Overall length: 2718 mm (107 in). Working height: 1448 mm (57 in). Weight: 4945 kg (10,900 ...
Manufactured by:Quality Machine & Manufacturing based inDes Moines, IOWA (USA)
For sampling grains, granulars and pellets, GF-type samplers offer different mounting options, and are designed simply. They feature a 316 stainless steel tube mounted at a 45-degree angle to the material flow and a slot that faces downstream between sampling periods. When signaled by the control system, the tube rotates 180 degrees so that the slot faces directly into the material flow to ...
Manufactured by:Vohl Inc based inSaint-Marc-des-Carrières, QUEBEC (CANADA)
Overall height: 3353 (132 in). Overall width: 2908 mm (114.5 in). Overall length: 2235 mm (88 in). Working height: 1448 mm (57 in). Weight: 4945 kg (10,900 ...
Manufactured by:Astec Industries, Inc based inChattanooga, TENNESSEE (USA)
The Peterson 5900E disc chipper produces high quality paper chips when used with a Peterson 4800F debarker, or fuel chips as a stand alone fuel wood chipper. The 5900E is powered by a Caterpillar C18, Tier III, 765hp (570kW) engine, which is both fuel efficient and maintenance friendly. The 5900E can be configured with a three or four pocket disc, with several optional sheave sizes to make ...
Manufactured by:Industrial Screw Conveyors, Inc. (ISC) based inBurleson, TEXAS (USA)
Continuous Discharge Bucket Elevators are designed to handle various types of materials ranging from light to heavy and from fines to large lumps. Buckets are spaced continuously and loaded by direct feeding or being scooped from the boot. As buckets discharge, the material flows over the preceding bucket which is designed to form a chute to the discharge spout, minimizing product loss due to ...