- Home
- Equipment
- north america
- pivot irrigation system
Show results for
Refine by
Pivot Irrigation System Equipment Supplied In North America
43 equipment items found
Manufactured by:Irtec S.p.A. based inCastelvetro di Modena (MO), ITALY
Simple and immediate coverage of irrigation needs. Water supply is possible by hose or by canal. Used on rectangular farms, self-propelled booms with central drive ...
Manufactured by:Irtec S.p.A. based inCastelvetro di Modena (MO), ITALY
When to irrigate at 360 ° is not a figure of speech. The system designed to irrigate large extensions in complete autonomy. Available in three versions, with water supply from canal, with flattenable hose, or PE pipe. Equipped with a self-propelled boom with central drive impeller and swivel joint for linear and rotary irrigation up to 180°. At the end of the run, the Hippodrome system ...
Manufactured by:AFKO Ltd. Şti. based inKahramankazan, TURKEY
This system consists of many spans connected to each other by mobile connection. All spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degrees. Thus, the pivot is suitable for rough terrain. This system irrigates from 1 hectare by ...
Manufactured by:J.S. Knotts Irrigation based inFelton, DELAWARE (USA)
Over 30 years of corner system irrigation experience has resulted in consistently improved levels of performance and reliability. T-L corner arms maintain continuous movement utilizing T-L’s patented hydraulic alignment controls. Corner span drives are hydraulic planetary design that are direct coupled to the hydraulic motors resulting in a narrow corner span profile reducing crop ...
Manufactured by:Pierce Corporation based inSan Antonio, TEXAS (USA)
The CP600 is a system designed to adapt to a variety of weather, crop and field conditions, all the while providing maximum performance in water efficiency and increased crop yields, year after year. The system can be configured for a variety of span lengths and overhang combinations with multiple sprinkler ...
Distributed by:Bickett Farm Tiling & Irrigation based inRidgway, ILLINOIS (USA)
T-L’s Towable Pivot Irrigation System’s mobile design mounts the power source, hydraulic pump, and fuel tank on the pivot point enabling towing preparation to maximum efficiency. T-L Towable Pivot Irrigation Systems enjoy the same features as our conventional, hydro ...
Distributed by:The Pivot Doc LLC based inYork, NEBRASKA (USA)
Over 30 years of corner system irrigation experience has resulted in consistently improved levels of performance and reliability. T-L corner arms maintain continuous movement utilizing T-L’s patented hydraulic alignment controls. Corner span drives are hydraulic planetary design that are direct coupled to the hydraulic motors resulting in a narrow corner span profile reducing crop ...
Manufactured by:T-L Irrigation Co. based inHastings, NEBRASKA (USA)
Over 30 years of corner system irrigation experience has resulted in consistently improved levels of performance and reliability. T-L corner arms maintain continuous movement utilizing T-L's patented hydraulic alignment controls. Corner span drives are hydraulic planetary design that are direct coupled to the hydraulic motors resulting in a narrow corner span profile reducing crop ...
Manufactured by:T-L Irrigation Co. based inHastings, NEBRASKA (USA)
Unique R-1 radial design well-suited to irrigation applications requiring ...
Manufactured by:Pierce Corporation based inSan Antonio, TEXAS (USA)
A towable pivot irrigation system operates similarly to a conventional center pivot but offers flexibility with adjustable positioning. It is transported by a tractor pulling directly from its four-wheel carriage to access the next hydrant. Typically, it irrigates one position per season, but it can also cover ...
Distributed by:Ritthaler Irrigation based inFremont, NEBRASKA (USA)
Materials add up to a system that is lighter weight, more efficient and longer-lasting than comparable systems. First introduced by Reinke in 1968, the Electrogator became the world’s first reversible, electric-gear-drive center pivot irrigation system. ...
Manufactured by:T-L Irrigation Co. based inHastings, NEBRASKA (USA)
Highly experienced center pivot engineers whose mission is to provide simplicity, efficiency, exceptional performance and longevity design T-L’s center pivot irrigation systems. Our hydrostatic center pivot drives use the same hydraulic components growers are familiar with in other farming equipment, thus ...
Manufactured by:AFKO Ltd. Şti. based inKahramankazan, TURKEY
This system consist of many spans connected to each other by mobile connection, all spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degree. Thus the pivot is suitable for rough terrain. This system irrigates from 1 hacter by one ...
Manufactured by:Pierce Corporation based inSan Antonio, TEXAS (USA)
As a result of these differences, we have designed a cost-effective solution to meet the needs of both the growers and the fields being irrigated. Small field pivots are a lightweight pivot system especially designed to irrigate small fields with low flow rates saving investment and energy costs and using the ...
Manufactured by:AFKO Ltd. Şti. based inKahramankazan, TURKEY
Enclosed collector ring to supply continuous power and signal voltage to the motors and controls on center pivot irrigation ...
Manufactured by:Phase Technologies, LLC based inRapid City, SOUTH DAKOTA (USA)
This product is the culmination of years of effort...we are very proud of our research and development team. Ted Pettyjohn, CEO. We recognized there had to be a Better Way to operate center pivot irrigation systems on single-phase service. We also knew it had to be reliable, energy efficient, rugged for any outdoor conditions, and easy to ...
Manufactured by:L&V Innovations based in, NEBRASKA (USA)
The Pivot Flusher is designed to allow you to drain sand and sediment from a center-pivot irrigation system each time it cycles on or off. This allows for a complete system flush every time you start your ...
Manufactured by:T&C Mfg & Operating Inc based inGreat Bend, KANSAS (USA)
T&C MFG & Operating, Inc., is one of the leading manufacturers and distributors of irrigation gaskets. Since 1996, we have manufactured rubber gaskets in numerous types and sizes for the Irrigation industry. We produce gaskets for steel, aluminum and pvc irrigation pipe, as well as center pivot ...
Manufactured by:AFKO Ltd. Şti. based inKahramankazan, TURKEY
AFKO Center pivot irrigation systems main pipes: Mainly, AFKO uses several types of pipes, the ones used inside the pivot are galvanized, plugs for sprinklers with spacing of 113″. they are called main pipes as they are the main component of the pivot system, the main pipe is provided in ...
Manufactured by:Blu-Jet, by Unverferth Manufacturing Co., Inc. based inKalida, OHIO (USA)
The most versatile and effective pivot track closers on the market are easy-to-use and won't break the bank! Plus, the TrackMaster II pivot irrigation track closer and TrenchMaster drainage tile trench closers are field proven with more than 25 years of experience. There are no better tools for eliminating tire ruts left behind by your center ...