Refine by
Plow Equipment Supplied In Canada
117 equipment items found
Manufactured by:BOSS Products, a division of The TORO Company. based inIron Mountain, MICHIGAN (USA)
The DXT combines both trip-edge and full moldboard trip technologies for high and low trip protection when striking obstacles like frozen snowbanks, manhole covers and curbs. Flared wings with enhanced curl throw snow with maximum efficiency and the DXT's multi-position plow blade can quickly and easily switch positions to move large amounts of ...
Manufactured by:BOSS Products, a division of The TORO Company. based inIron Mountain, MICHIGAN (USA)
The BOSS XT plow's flared blade wings and enhanced curl design throw snow higher and farther than conventional snowplows, while the full moldboard trip design helps prevent plow damage when an obstacles is encountered. The XT is designed to take on winter's worst with a heavy-duty push frame and center section. ...
Manufactured by:John Deere based inMoline, ILLINOIS (USA)
The John Deere 2410 Chisel Plow has been field-proven to provide consistent residue management for years. And it’s as reliable as it is productive. The robust frame of the 2410 delivers added strength for more aggressive performance. Heavy-duty 4x4-inch box-beam-steel cross members give the 2410 plenty of ...
Manufactured by:Empire Welding & Machining Ltd. based inNorth Battleford, SASKATCHEWAN (CANADA)
Insert HDPE pipe up to a depth of 24 inches. Pipe Diameters from 1-1/4 inch up to 4 inches. Power Requirements of 100 to 150 horsepower. Length 172 inches. Height 128 inches. Width 92 inches. Tandem Carries a Bigger Payload for Heavier ...
Manufactured by:BOSS Products, a division of The TORO Company. based inIron Mountain, MICHIGAN (USA)
Increasing your blade width by a full 22" at a 30-degree angle, these convenient poly and stainless plow wings will cut your plowing time and attach and detach within ...
Manufactured by:Metal Pless Inc. based inPlessisville, QUEBEC (CANADA)
"LiveEdge" soft drive mechanical steel trip edge heavy duty multi-section 6" x ¾" x 24". Mobile steel trip edge following the imperfection of roads, exclusive Metal Pless system, reduces up to 50% the use of salt and abrasives. Carbide cutting edge on main mouldboard only. Bolt-on fixed side wings. Wings have self-leveling abrasion shoes. Lateral floating of the blade. Wear plate welded to ...
Manufactured by:La Sole Inc based inSte-Helene-de-Bagot, QUEBEC (CANADA)
Using a 200HP tractor or better, the LaSole Tile Plow allows you to install tiles, double your tiling, or install a completely new tile ...
Manufactured by:Metal Pless Inc. based inPlessisville, QUEBEC (CANADA)
Extendable and reversible snow plow. Lateral floating of the blade. "Heavy duty" construction. Floating skid shoes on the end gates. Full tripping system of the blade. Flow ‘‘divider’’ to make the extensions go out and back in at the same time. Extension cutting edges are installed up against the main blade cutting edges for a better quality in snow ...
Manufactured by:Metal Pless Inc. based inPlessisville, QUEBEC (CANADA)
SOFT drive multi-section mechanical steel trip edge "Heavy duty" CHT400 ¾'' x 6'' (HD). Mobile steel trip edge following the imperfection of roads, exclusive Metal Pless system, reduces up to 50% the use of salt and abrasives (LE). Carbide cutting edge on main mouldboard only (LE). Adjustable crossover relief valve for hydraulic protection on the power angle system. HighSpeed, accentuated ...
Manufactured by:Wil-Rich based inWahpeton, NORTH DAKOTA (USA)
The 2500 Series Chisel Plow from Wil-Rich integrates a deeper frame front to rear in a refined design, compared to its predecessor. The deep frame utilizes four ranks to improve the flow of heavy residue from today’s higher yielding crops. The 2500 Series not only utilizes a deep frame, but also, 3/8″ (9 mm) thick steel for even more strength. This makes it one of the ...
Manufactured by:Innotag Distributions inc. based inBeloeil, QUEBEC (CANADA)
Drainage up to 183 cm (6 feet deep). Clearance of 50 cm (1’ 8’’) for a total depth up to 2.3 m (7’ 8’’). Approximate weight 12 000 lbs for maximum ...
Manufactured by:Metal Pless Inc. based inPlessisville, QUEBEC (CANADA)
Blade without pivot (no angle) with two hydraulic side wings. 180° multiple hydraulic side wing positions. Side wings made of "Heavy duty" steel CHT400. "Heavy duty" CHT400 steel multi-section mechanical trip edge ½’’ x 6’’ (Std). SOFT drive mechanical steel trip edge, "Heavy duty" multi-section ½" x 6" (HD). Mobile steel trip edge following the ...
Manufactured by:BOSS Products, a division of The TORO Company. based inIron Mountain, MICHIGAN (USA)
You can be at your best when Mother Nature is at her worst with the powerful LDR Box Plows from BOSS. They attach quickly and easily to loaders and they work efficiently to help you restore order to the lots and roads of your community. They’re equipped with innovative protection technology and make your job faster, easier and more ...
Distributed by:McCormick Equipment based inPleasantville, IOWA (USA)
7550 Hours. 50,000 # machine. U/C 85%. New Paint. Tile Feeder. Deutz Diesel engine. Very good condition. Ready to go to ...
Manufactured by:Ralph McKay Industries, Inc. based inRegina, SASKATCHEWAN (CANADA)
CHISEL SPEAR POINT 12"X2"X5/16" 1 3/4-2X7/16. Attachment Method Bolt-on. Hole Spacing 1 3/4”. Size 12”. Bolt Size 7/16”. Thickness 5/16”. Type ...
Manufactured by:Innotag Distributions inc. based inBeloeil, QUEBEC (CANADA)
Drainage up to 152 cm (5 feet deep). Clearance of 41 cm (1’ 4’’). Approximate weight 9500 lbs for maximum ...
Manufactured by:Metal Pless Inc. based inPlessisville, QUEBEC (CANADA)
Universal subframe exclusive to Metal Pless. Double action hydraulics ‘‘Pression Maxx‘‘ exclusive to Metal Pless. 180° multiple hydraulic side wing positions. Side wings made of "Heavy duty" steel CHT400. HD CHT400 steel multi-section mechanical trip edge ½’’ x 6’’ (Std). SOFT drive mechanical steel trip edge, "Heavy duty" multi-section ...
Manufactured by:Bron A Division of Roberts Welding and Fabricating Ltd. based inWoodstock, ONTARIO (CANADA)
BRON Offsetting Static Add-On Plows are available for Power Units from 170hp-500hp. These robust fully offsetting plows are designed for the installation of fibre optics, copper cable and flexible pipe at working depths ranging from 42"(106cm) to ...
Manufactured by:Bron A Division of Roberts Welding and Fabricating Ltd. based inWoodstock, ONTARIO (CANADA)
BRON Offsetting Static Add-On Plows are available for Power Units from 170hp-500hp. These robust fully offsetting plows are designed for the installation of fibre optics, copper cable and flexible pipe at working depths ranging from 42"(106cm) to ...
Manufactured by:Bron A Division of Roberts Welding and Fabricating Ltd. based inWoodstock, ONTARIO (CANADA)
BRON Offsetting Static Add-On Plows are available for Power Units from 170hp-500hp. These robust fully offsetting plows are designed for the installation of fibre optics, copper cable and flexible pipe at working depths ranging from 42"(106cm) to ...