Agricultural industry Equipment in Alberta

  • Premium

    Model LR-24 - Backpack Electrofisher

    The LR-24 is the most advanced electrofisher ever produced. The user interface is designed to make the LR-24 quick and easy to use. This allows the LR-24 to offer a number of special features not available on competing backpack electrofishers.

    By Hoskin Scientific Limited Office in Edmonton, ALBERTA (CANADA). from Environmental Monitoring Product line

  • Premium

    Hoskin Scientific - Model NDVI/SRS - Spectral Reflectance Sensor

    This sensor will connect to our Em50 loggers and is designed to be positioned above a plant canopy to monitor the Normalized Difference Vegetation Index  (NDVI) and Photochemical Reflectance Index (PRI), based on reflected wavelengths detected by specialized photosensors in the instrument. NDVI is typically used as a measure of plant health, ...

    By Hoskin Scientific Limited Office in Edmonton, ALBERTA (CANADA). from Environmental Monitoring Product line

  • AppliMax - Spray Nozzle-Body Tool

    One tool makes spray nozzle and body servicing a lot easier. Specifically designed to remove spray nozzle caps, pre-orifices and diaphragm check valve and solenoid retainer nuts. Easily loosens stuck or tight caps and retainer nuts. Pre-orifice inserter/remover and strainer retriever.

    By ATI Agritronics Inc. Office in Calgary, ALBERTA (CANADA).

  • Model 7x14 - Look Cargo Trailers

    7' x 14' ST, 6' extra height, Rear ramp door, 4 D rings, dome light w/switch, 32'man door with Cam lock, 2- 3500lb axles.

    By Rays Trailer Sales based in Camrose, ALBERTA (CANADA).

  • Farmland Pin Puller

    The days of multiple trips in and out of the cab to remove implement pins are finally over. Now it's one time, every time. Just swing the Farmland Pin Puller into place, hook up the pin, and drive away. Universal mounting bracket mounts to the tongue of most tractors and folds away neatly.

    By Farm Land Specialty Products based in Mayville, ALBERTA (CANADA).

  • Model 918 - Heavy Hay Rake

    Made in Canada, the Jiffy hay rake is built heavy to minimize flexing, sag and sway even under the heaviest raking and rougher field conditions. Staying strong and solid while working in the field, this hay rake helps you ensure working height and width won’t budge, allowing you to rake faster and minimizing dirt in the windrow. Our rakes ...

    By Renn Mill Center Inc. based in Lacombe, ALBERTA (CANADA). from Jiffy Products Product line

  • Feeders

    Tube-O-Mat, Skiold, Koca and Grand Manufacturing are the main swine feeders that Nor-Ag distributes.

    By Nor-Ag Ltd based in Red Deer, ALBERTA (CANADA). from Swine - Feeding Product line

  • Feed Drops

     Nor-Ag has everything you need from single pen drops to group feeding. We carry Kwick Attach, Volu-Metric, Ultra, Econo and Trickle Feed Drops.

    By Nor-Ag Ltd based in Red Deer, ALBERTA (CANADA). from Swine - Feeding Product line

  • Tube-O-Mat Feeders

    Tube-O-Mat feeders come in two different styles a VIP and a Top feeder. Each feeder has a stainless steel trough, large feed hopper,precise feed adjustment and a feed agitator to prevent bridging.

    By Nor-Ag Ltd based in Red Deer, ALBERTA (CANADA). from Swine - Feeding Product line

  • Speed Treatment Equipment

    By Clews Management, Ltd. based in Red Deer, ALBERTA (CANADA).

  • Model 1 - Bi-Fold Door

    By Clews Management, Ltd. based in Red Deer, ALBERTA (CANADA).

  • Duralite - Model AL20 - Aluminum Stock Trailer

    Duralite Aluminum Stock Trailer, 2-7000# axles, 7' wide, 6'8 height, Weight 3190#, centre gate, rear solid gate with slider, side access 28 door, neck gate, 20000# spring loaded jack, 12 cross members, one piece roof, tapered nose, 1/8 aluminum checker plate floorelectric brakes, dome interior light w/ rear swith, LED lights, rear load lights w/ ...

    By FM Trailer World based in Strathmore, ALBERTA (CANADA).

  • Model 7000 - Blade Cultivator

    Nobleford, Alberta is the birthplace of the Blade Cultivator concept, to conserve moisture and leave stubble standing. The NEW NOBLE Blade Cultivator has been built since the early 1940's and the mechanical trip model is the latest technological improvement making the Blade Cultivator available to areas where rocks did not allow the use of Shear ...

    By Agri-Tech Manufacturing Ltd based in Nobleford, ALBERTA (CANADA). from Agricultural Product line

  • Model 170, 210 & 250 - Air Seeder

    The 170/210/250 AIRSEEDER is designed to meter seed accurately and is a result of modern research and development and a reflection of customer suggestions. New Noble Distributors would like to congratulate you on your choice of a NEW NOBLE 170/210/250 SERIES AIRSEEDER.This Operator's Manual and Parts List has been prepared to provide the necessary ...

    By Agri-Tech Manufacturing Ltd based in Nobleford, ALBERTA (CANADA). from Agricultural Product line

  • Model 401 - Piston Airpump

    This modified 75R starts under load and has the largest displacement of the 75R models.

    By Ackenberry Trout Farms based in Camrose, ALBERTA (CANADA).

  • Wilson - Aluminum Super B Grain Trailer

    Wilson's Pacesetter Super B trailer  allows you to move more payload per haul by coupling two lightweight aluminum trailers together.  The lead unit's fixed fifth wheel assembly is located on its extended tri-axle sub frame, 57' from the rear of the trailer. Lightweight, long-lasting aluminum and Wilson's tested-tough construction ...

    By Andres Trailer Sales based in Lethbridge, ALBERTA (CANADA).

  • Classic Seed Treater

    The “CLASSIC” Seed Treater straps to the top side of your drill fill or auger about 3 feet from the intake. (NO HOLES TO DRILL, NO WELDING or even wrenches required.) One end of the hose is fastened to the bottom end of the treater and the other to the safety cage at the auger intake. There – 3 to 4 minutes maximum to install.

    By Lockhart Industries Ltd based in Camrose, ALBERTA (CANADA).

  • Model FBU 1014 - Grain Bag Unloader

    At RENN we understand that loading the grain bag is only part of the story – unloading and recycling the empty grain bag are also crucial steps in the process. RENN has responded to the needs of farmers by drawing on decades of manufacturing experience to design and build Grain Bag Unloaders that are easy to use and offer exceptional plastic ...

    By Renn Mill Center Inc. based in Lacombe, ALBERTA (CANADA). from Grain Baggers and Unloaders Product line

  • Roto-Shear - Model MacDon for D50/D60 - Header

    RotoShears to fit a MacDon D50/D60 header. Each RotoShear comes with divider board, collector rod and mounting brackets, braces and hardware as required.  Does not include hoses or hydraulic fittings.

    By RotoShear based in Forestburg, ALBERTA (CANADA).

  • Sunrise With Decals

    The Sunrise is the plate used to mount the Orbital Motor and Rotor on.

    By RotoShear based in Forestburg, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you