- Home
- Equipment
- north america
- row crop cultivators
Refine by
Row Crop Cultivators Equipment Supplied In North America
24 equipment items found
Manufactured by:Dickey Machine Works based inWhite Hall, ARKANSAS (USA)
We began manufacturing Spray Fenders in 1964 and soon after began offering complete cultivators that were dubbed DickeyVators. We now have several different models to choose from with optional equipment available to suit your specific ...
Manufactured by:H&S Manufacturing, Inc. based inStephen, MINNESOTA (USA)
Cultivate using a proven toolbar and row ...
Manufactured by:Orthman Manufacturing based inKALIDA, OHIO (USA)
The wraparound parallel linkage and close-coupled row unit design make the Orthman 8315 Cultivator maneuverable in the field and on the road. When equipped with the optional western sweep and adjustable ridging wings, the 8315 is the ideal tool for ...
Manufactured by:Einböck GmbH based inDorf an der Pram, AUSTRIA
The CHOPSTAR 3-60 has up to 3 tines per hoeing element and can be used in row-crops with a row spacing of up to 60 cm / 23.60" (such as beets, soybeans, field beans, etc.). Depending on the conditions and the aim of the hoeing pass, a wide range of tools such as heaping elements, heaping sweeps, weeder tines mounted behind the elements, finger weeders, etc. can be attached to the front or rear ...
Manufactured by:Elmers Manufacturing Inc. based inAltona, MANITOBA (CANADA)
Elmers Row Crop Cultivator is the best solution to maximize the growth in the early stages of your row crop. The unique rolling shield design protects the plants while making it virtually impossible to ...
Manufactured by:H&S Manufacturing, Inc. based inStephen, MINNESOTA (USA)
H&S cultivators are well balanced and available in either 2 point or pull type. The pull type cultivator allows the use of a smaller 2 wheel drive tractor. This product is a well tracking, ease to use cultivator with disc crop shields and setting adjustments to meet the farmer's ...
Manufactured by:Alloway Standard Industries based inFargo, NORTH DAKOTA (USA)
Design your own cultivator…the right tine, the right sweep, the right shield. For Use In: Cotton, Soybeans, ...
Manufactured by:Einböck GmbH based inDorf an der Pram, AUSTRIA
The CHOPSTAR 5-90 has up to 5 tines per hoeing element and is used in row-crops with up to 90 cm / 35.40" row spacing, such as corn, sunflowers, etc. Depending on the conditions and the aim of the hoeing pass, a variety of tools such as heaping elements, heaping sweeps, weeder tines mounted behind the elements, finger weeders etc. can be attached to the front or rear implement. The precision of ...
Manufactured by:Orthman Manufacturing Inc based inLexington, NEBRASKA (USA)
The Orthman 8375 Row Crop Cultivator has proven itself to be the industry’s most versatile row crop tillage tool. The 8375 is designed to utilize Orthman’s wide selection of cultivation tools and attachments to ensure a custom field pass for even the toughest of field ...
Manufactured by:Einböck GmbH based inDorf an der Pram, AUSTRIA
The CHOPSTAR 1-30 has 1 tine per hoeing element and can be used in row-crops with a row spacing of up to 30 cm / 11.80", e.g. cereals, field beans, lupins, etc. Depending on the conditions and the aim of the hoeing pass, weeder tines mounted behind the element or different sweeps (such as ultra-flat) can be mounted on the front or rear hoeing machine. The precision of the CHOPSTAR 1-30 can be ...
Manufactured by:B&H Manufacturing, Inc. based inJackson, MINNESOTA (USA)
Our row crop cultivators have been helping farmers control weeds for over 20 years. Having been around that long, we have been able to fine tune our design to provide you with the most reliable method of weed control. Since the introduction of glyphosate resistant crops, many farmers have been fighting an uphill battle against ...
Manufactured by:Einböck GmbH based inDorf an der Pram, AUSTRIA
The CHOPSTAR-TWIN precision hoe was developed for precise hoeing above the row. The hoeing parallelogram does not work between the rows, but is mounted directly above the row. This allows a very narrow hoeing belt, which makes it possible to hoe young crops very early and narrow at the same time. This is achieved by two cutting disc adjustable in angle in combination with following angle knives: ...
Manufactured by:Alloway Standard Industries based inFargo, NORTH DAKOTA (USA)
Cultivate row planted or bed planted crops in single or multiple rows. As your crops grow, this cultivator can be quickly modified or adjusted with a variety of options and accessories to work all season long! For Use In: Broccoli, Cauliflower, Melons, Lettuce, Tomatoes, Onions, Peppers, ...
Manufactured by:Einböck GmbH based inDorf an der Pram, AUSTRIA
The premium row-crop cultivator CHOPSTAR-PRIME can be equipped with up to 5 vibro-tines per hoeing element and is used in row crops with a row distance of 25 cm / 9.80" to 90 cm / 35.40" (such as beets, soybeans, field beans, corn, sunflowers, etc.). Centerpiece of the PRIME is a central ...
Manufactured by:Einböck GmbH based inDorf an der Pram, AUSTRIA
The special row-crop cultivator CHOPSTAR-VERSO has a pair of cutting discs and up to 5 vibro tines per hoeing element (of which two angle knives) mounted and can be used in row crops with a row distance of 45 to 80 cm / 17.7" to 31.5" (such as beets, soybeans, field beans, corn, sunflowers, ...
Manufactured by:Alloway Standard Industries based inFargo, NORTH DAKOTA (USA)
The Model 2065 was developed so you can design your own cultivator. Build a single shank unit with cutting coulter and row weeder disc or add 3-tine or 5-tine gang assemblies for special applications. The 2065 is ideal for cultivating in heavy-trash and in hard-to-cultivate soils. For Use In: Corn, Cotton, Soybeans, Sunflowers, Potatoes, and ...
Manufactured by:Lorenz Manufacturing Company based inBenson, MINNESOTA (USA)
The C-Shank cultivator is similar in design to the Vibra Spring cultivator, with the exception of a stiffer shank system for medium duty applications. Each shank operates under a spring-loaded tension assembly to accomodated field rocks and debris. Available in 3-shank or 5-shank gang models. 22 inch heavy duty C-shank. Adjustable 4x12 gauge wheel. Gang spacing can easily be adjusted for any row ...
Manufactured by:Lorenz Manufacturing Company based inBenson, MINNESOTA (USA)
The Vibra Springtine is a good choice for all light duty cultivating. The vibrating action of the Danish Tine cuts through dirt effectively with minimum moisture loss. Five tines per inner gang is standard. 4x12 inch gauge wheel. Gang spacing can easily be adjusted for any row width. The Vibra Spring cultivator is available in non-folding 2, 4, ...
Manufactured by:Clemens GmbH & Co. KG based inWittlich, GERMANY
Efficient implement combinations are required for effective use of the high-wheel tractor. The base frame enables a wide range of attachment options and can be shortened as required. With its numerous openings, the robust, straight frame offers the largest area for mounting attachments and tool holders. Thanks to the large number of attachment positions, the user enjoys maximum ...
Manufactured by:Clemens GmbH & Co. KG based inWittlich, GERMANY
The universal frame is a very compact, stable and side-independent adjustable frame, which is suitable for all attachments. The width can be adjusted symmetrically as well as asymmetrically manually or via the hydraulic ...