Tractor-Driven Pump (Tractor Implements) Equipment
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
A multifunctional 6" inch tractor-driven manure pump for the agricultural sector. For pumping liquid slurry, ditch water or simply for irrigation. The B140 is a self-priming pump with a large solids passage, a lot of capacity, as well as significant pressure. Just fill the pump housing with water ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
This 8 inch (PTO) tractor-driven pump is designed to allow you to invest responsibly in emergency pumps with a low utilisation rate. Tractors with PTO are available anytime and anywhere in the world to drive the pump in case of emergency. With the BA160L, you have a large pump ...
-
Manufactured by Tramspreadbased in UNITED KINGDOM
The Bauer SX 1000 slurry pump is suited to larger farmers and contractors, who require a high performance pump to supply today’s ever longer umbilical systems. It has a minimum power requirement of 150hp and is supplied complete with hydraulic primer or optional auto primer, six inch inlet, four inch outlet with gate valve and ...
-
Manufactured by Ekler Pompa ve Makine San. Tic. Ltd. Stibased in TURKEY
The PTO driven sprinkle pump provided with special seal gasket is a pump which can operate at any condition. and sealing is PUMP which can work under any conditions. Does not matter how dirty, clayed, sandy and stony your water is. It is very easy to fit sealing. The water inlet of this pump 4” is of a high ...
-
Manufactured by Ekler Pompa ve Makine San. Tic. Ltd. Stibased in TURKEY
The tractor PTO driven centrifuged pump is with 3" input and 3" output is used for agricultural irrigation by connecting to the table which can be carried on the hanger arm of the tractor. It is used for pumping to high altitudes and horizontal long distances and in sprinkle and drip irrigations. Gear selection ...
-
Manufactured by Ekler Pompa ve Makine San. Tic. Ltd. Stibased in TURKEY
Single stage and staged pumps are the pumps used to pump long distances and steep slopes in sprinkling and drip irrigation. Tractor motor power must be at least 37.5 KW (50 HP). If you want to operate on tractors under this power, you should contact our factory. The table to which the pump is is ...
-
Manufactured by Ekler Pompa ve Makine San. Tic. Ltd. Stibased in TURKEY
Tractor PTO driven centrifuged pump is with 3" inlet and 2 ½" outlet and is used for water filling and discharging of tankers at the rear of the tractor. It can be used in agricultural irrigation by connecting to the portable table on the hanger arm of tractor. The design of the gear ratios was made in the ...
-
Manufactured by Rainbow Manufacturing Companybased in USA
Rainbow’s line of heavy duty Tractor P.T.O. driven centrifugal pumps are the result of over 40 years of pump experience. These tough and reliable pumps may be coupled quickly to a conventional 540 RPM tractor power take-off with a 1 3/8 inch, six-tooth spline, or 1000 RPM take-off with a 1 ...
-
Manufactured by IRRIMEC s.r.l.based in ITALY
Turbine drive, the patented "Turbimec" system, interchangeable for flows of 10 to 130 m³/hr. Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground support platform, giving 360° turntable rotation. ...
-
Manufactured by IRRIMEC s.r.l.based in ITALY
Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr. Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground support platform, giving 360° turntable rotation. ...
-
Manufactured by IRRIMEC s.r.l.based in ITALY
Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr. Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground support platform, giving 360° turntable rotation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you