Animal Feed Hammer Mill In The Feed Industry
As the main equipment of feed industry, hammer mill is an important factor for the formation of feed quality, feed remuneration and feed processing cost. Therefore, it is a problem that feed production can not be ignored to properly master crushing technology and choose appropriate crushing machine.
Zhengzhou Fusmar Machinery is a professional animal feed hammer mill manufacturer, this article we will introduce this machine in detail.
Animal Feed Hammer Mill Introduction
Animal feed hammer mill is mainly used to turn solid materials into small pieces under the action of mechanical force. The operation of breaking up a material by mechanical means to overcome its internal cohesion is called crushing or fine grinding.
Generally speaking, the bulk material into small pieces of material, called broken, and the small pieces of material into a fine powder, called fine grinding. Broken and fine powder habit also known as crushing. When solid materials are divided into small pieces or fine powders, the surface area per unit weight will increase, thus increasing the reaction rate of physical and chemical reactions.
It is mainly used for coarse crushing and fiber processing of various granular grain raw materials, such as straw, sorghum straw, wheat straw, cotton straw, rape straw, wood chips, etc.
Animal Feed Hammer Mill Structure
The bearing table and the cutter table are on the same plane, shortening the length of the main shaft, so the structure is compact, the sieve path is in a stepped form, increasing the angle of the sieve sheet, increasing the powder discharge area, making the crushing effect good, the sieve sheet is easy to replace.
Hammer mill, with bearing table, fixed knife table, screen plate, screen frame, its characteristics lie in the bearing table and fixed knife table cast on the same plane outside the reserved hole in the lower housing shaft, the screen frame fixed by screws in the lower housing to form a ladder, its circumference is oval.
The Working Principle Of Animal Feed Hammer Mill
The hammer mill mainly relies on the impact energy to complete the crushing material operation. Feed mill grinder is working, the motor drives the rotor high-speed rotation, the material into the crusher chamber evenly and high-speed rotary hammer impact, cut apart the material to the material being broken, at the same time, the material's own gravity makes material from the high-speed rotating hammer head to the body panel, sieve, resistance is greater than the screen hole size of materials on the sieve plate continues to hit by the hammer and the grinding, crushing to the discharging granularity until the final through the sieve plate outside.
Hammer mill is mainly rely on impact to break materials. Material into the small hammer mill, suffered shattered by the impact of the high-speed rotary hammer, the crushed material, obtained from hammer broken hammer kinetic energy, from high speed toward the body flap, screen, meanwhile material impact each other, have been broken many times, from the gap eduction , individual large material, again by the impact of the hammer head, grinding, extrusion and crushing, the material being hammer broken hammer out from the gap. To get the desired granularity of the product.
Animal Feed Hammer Mill Advantages
1. Working hammer head, cast by new process, has wear-resisting and impact resistance.
2. The granularity can be adjusted according to customer requirements.
3. Hammer the seal of the body structure to solve the problem of dust pollution and body leakage in the crushing workshop.
4. The overall design has the advantages of beautiful shape, compact structure, few wearing parts and convenient maintenance, etc. It is an upgrade and replacement product.
5. Compact structure, beautiful appearance, good wear resistance, easy maintenance.
Zhengzhou Fusmar Machinery as a professional hammer mill manufacturer, with years of experience in production and sales, we provided machines are welcomed by customers.