Chief Industries - Model CIEH - Hopper Bottom Storage Silo
From Chief Industries - Grain Storage
Model 8-27 CIEH silos feature a galvanised steel support fram & incorporate a roof inspection hatch as standard. Special Polyester Coated roof available at extra cost.
-
Most popular related searches
Products Details
Shallow form (119mm pitch) corrugated sidewall sheets are manufactured from high quality galvinised 450 grammes/m² (including both sides) minimum spangle steel. Fixings incorporate a formed bolt head.
External galvanised stiffeners/anchors are supplied in a variety of specifications dependant upon the silo diameter and height, stiffeners are joined by formed fishplates.
Type Phenicone utilises a compression ring to which the silo ring and hopper cone are bolted. This is used for larger volume hopper silos.
Type CEC utilises a series of brackets around the circumference of the silo ring bolted directly to the hopper cone.
Silos feature a ribbed roof on models up to 10 CIE.
Single ring access doors, one is supplied as standard, incorporate hot dipped galvanised steel frame. Various designs to suit specific silo heights are available.
Standard hopper supplied complete with sidewall sheets to ground level and 2m x 1m access frame in sidewall to allow access to hopper outlet. This provides added benefit of having the hopper and any unloading systems protected from rain, wind etc. 45° and 60° galvanised hoppers are available depending on material to be stored.
Options
Various width catwalks, access ladders and rest platforms designed and manufactured to European Standards.
Note: The cylindrical barrel is designed for storage of free flowing granular material with a maximum density based on maize at 900kg/m³, friction angle of 30 degrees and angle of repose of 28 degrees, and on barley a density of 825kg/m³, friction angle of 27 degrees, according to DIN1055. Sidewall: High quality European steel Fe E350G. (350N/mm²) with standard galvanised finish of 450 grammes/m², G140 (incl. both sides). Roof: As standard manufactured from Aluzinc AZ185, also available with Polyester Coated brown finish. Stiffeners/Anchors: High quality European steel Fe E350G (350N/mm²) with standard galvanising finish of 350 grammes/m², G115, or in the case of welded anchors, hot dipped galvanised. Fixings: Type 6/8 or 8/8, Z20 with seal washer.Useful (pitch) length of wall sheet: 2.8 metres Useful (pitch) height of wall sheet: 0.838 metres Roof angle: 25°
Customer reviews
No reviews were found for Chief Industries - Model CIEH - Hopper Bottom Storage Silo. Be the first to review!