Schurco - Model U Series - Unlined Slurry Pump
The U Series has the same hydraulic performance profiles of their lined counterparts in the S and L Series, and can be applied on existing lined slurry pump installations using a conversion kit.
-
Most popular related searches
U Series Profile
- Discharge diameters 2” to 10” (50mm to 250mm)
- Heads through 240ft (73m)
- Flow-rates through 6,000gpm (1,350m3/h)
- Casing pressure tolerance 300psig (2,020kPa)
Features
Wetted Parts
- Impellers – uses the same high chrome impellers as the lined pump series for even greater interchangeability – pump out vanes on rear and front (on closed impellers) reduce recirculation within pump – optional castings of straight or semi-Francis vanes (from 2 to 6 vanes on certain sizes) offer wider hydraulic options in single sizes
- Bowl/Casing – the unlined casing is extra thick high-chrome alloy material hardened to over 650 Brinnell. The suction side is cast in a contoured shape to mate with the impeller eyes to increase efficiency and reduce recirculation in the casing.
Seals
- Expeller (Centrifugal Seal) – no external sealing water required where applicable
- Stuffing Box – flushed gland sealing with braided packing and a lantern ring
- Mechanical Seals
Bearing Assembly
- Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment
- Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field
Interchangeable with Warman® AHU® and MU® Series pumps.
Applications
- sugar beets
- coarse sand
- coarse tailings
- dredging
- phosphate matrix
- minerals concentrate
- bottom/fly ash
- lime grinding
- oil sands
- mineral sands
- fine tailings
- coal
- flotation
- pulp and paper
- FGD
- wastewater
Customer reviews
No reviews were found for Schurco - Model U Series - Unlined Slurry Pump. Be the first to review!