Applications available in Tajikistan

  • Premium

    Pumps for Sugar & Molasses

    The DESMI ROTAN® pumps are used for pumping of different sugar products from cane and beet juice to molasses and finished sugar solutions. The sugar products supplied direct from the sugar mill is chemically neutral whereas imported sugar products may contain small amounts of formic or sulphuric acid in order to prevent fermentation during transportation. Sugar products containing acid may cause corrosion in cast iron pumps so in some cases stainless steel pumps should be used. Sugar products have to be considered an abrasive liquid which is why the pump material has to be of wear resistant material. Viscosity of sugar products lies between 500 and 20,000cSt dependent on temperature and dry matter (BRIX). Therefore, it is recommended to pay special attention to the viscosity in relation to temperature when selecting a pump. Seal less pumps has been successfully used and to prevent bearing problems the pumps should be dimensioned to approximately 30 per cent of maximum speed.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Aeration and mixing technologies for winery wastewater treatment

    Your partner from vine, to barrel, to bottle. Wine production generates a wide variety of challenges managing wastewater throughout the year, and decades of helping winemakers has taught us that no two winery wastewater treatment systems are alike. In the face of increasing scrutiny from regulatory agencies, along with water, energy, and sustainability initiatives, we understand why you might feel like your focus is shifting from winemaking to wastewater management. That’s where we can help.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Solid/liquid separation for food & beverages

    Need to maximize yield from your raw materials? Improve the purity of your product? Create the next future trend in taste and texture? Whatever your specific need, our aim is to put all the right solutions at your fingertips to ensure success. How can we help you? Irrespective of end products, our customers demand a customized solution for their solid/liquid separation and automation challenges. An approach where the starting point is not a separator, decanter, or filter press, but rather a careful evaluation of their objectives. And it all starts with a frank discussion about end product quality, efficiency, capacity, processes, and local support – we call it 360 degrees of separation.

  • Premium

    Pumps for Chocolate Application

    Chocolate Pumping products like jam, dissolved sugar, dark, milk or white chocolate with whole nuts or other ingredients, DESMI can provide the solution to transport various liquids. Being one of the leading chocolate pump manufactures, we have a variety of pumping options to suit the needs of the chocolate industry. The product itself, application know-how and most importantly customer understanding, relationship and production demands are our leading stars when selecting the best solution for our customers. The ROTAN® pumps from DESMI are designed for pumping media with high viscosity such as chocolate, cocoa mass, cocoa liquor, cocoa butter, liquid chocolate, dissolved sugar, caramel, and other sugar products. The pumps are equipped with a heating jacket on the front and rear end. Rotors, idlers and idler bushings are with special clearances, enabling working pressures up to 12 bar.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Determination of fructose, glucose, and saccharose in beverages, fruit and vegetable products, honey, and bioactive food additives

    Introduction

    The technical directives and regulatory requirements specify the total content and relative contents of fructose, glucose and saccharose in juices, nonalcoholic and alcoholic beverages (incl. wines and winemaking materials), fruit and vegetable products, honey, and bioactive food additives. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Wastewater treatment for the canning and fish industry

    They have a high content value for organic material, solids, oils and grease, with the added presence of nitrogen, produced particularly in the cleaning, descaling, peeling and bone extraction process. To avoid the problem of salinity, several components can be made using ASI 314.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Solutions for the agriculture, food & beverage industry

    Our products have a number of applications in the agriculture and food industries and help with safety, analysis and tracking. Quality control for consistency of food products from field to fork is of prime concern to manufacturers and consumers alike. Making products that look, smell and taste good ensures consumers come back for more. So, with an ever-growing population demanding more food products than ever before, simple instrumental test methods are required to provide quick and reproducible data from the field to the factory via the shopping cart to the consumer. For example, the measurement of oil and fats are invaluable in the control of many foods, particularly in snack food products such as potato chips. In a similar way, the quality of the simple bar of chocolate may be judged its solid fat content using a rapid measurement which will determine a perfect product while on the farm, oil in seeds is vital to productivity and yield, ultimately dictating the price the farmer is paid for his products.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Determination of caffeine and theobromine in tea, coffee, cocoa, and herbal products

    The determination of caffeine and theobromine content in tea, coffee, cocoa, foodstuffs and in herbal products ensures safety and quality control of the products and identification of adulterants. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Belt presses for fruit juice & beverage manufacture

    Beverage Production: High Quality And Improved Profitability. Mechanical separation technology in the manufacture of beverages optimises yield while guaranteeing consistent quality.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Composting Systems for Institutional Kitchens

    Our clients are primarily tenant-owner`s associations, housing firms, building companies, schools and institutional kitchens

    By Joraform AB based in Laholm, SWEDEN.

  • Agitation and mixing solutions for fermentation

    Industrial processes based on fermentation are a major, mixer intensive segment of the Chemical Process Industries, and many products are produced via fermentation.  Fermentation uses micro-organisms to convert carbon or nitrogen based raw materials into new products.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Automatic Onion Root Cutting & Peeling Machine Line

    The automatic onion peeling & root cutting machine line, as the name implies, can accomplish the whole process of onion root cutting as well as peeling process. The all-in-one machine is more suitable for processing any states onion one time no matter they are oval or flat, small or big, skin thick or thin, loose or tight, dry or wet. With high efficiency, low cost and easy operation, this onion processing line is widely used in vegetables processing. Product Link: http://vegetable-machine.com/project/onions-root-cutting-peeling-machine-line.html Email: info@amisymachine.com

    By Amisy Machinery based in Zhengzhou, CHINA.

  • Automatic Crispy Fried Onion Rings Production Line

    Crispy fried onion rings production line is used to make delicious and popular snack food-crispy onion. This production line consists of onion root cutter machine, peeling machine, onion cutting machine, water bubble washing machine, air dehydration machine, onion fryer machine, deoiling machine, seasoning machine, packing machine and other auxiliary equipment. Onion rings processed by the production line are crispy and tasty with wonderful smell, which are favored by lots of people all over the world. We have manufactured crispy onion production machines to help customers start crispy onion business. Featured with high output, labor-saving, easy to operate, suitable for large scale fried onion production, fried onion production is worth the investment. Link: http://vegetable-machine.com/project/fried-onion-rings-production-line.html Email: info@amisymachine.com

    By Amisy Machinery based in Zhengzhou, CHINA.

  • Garlic Clove Separating and Peeling Production Line

    Consisted of two sets of elevators, garlic separator, picking line for separated garlic cloves, garlic peeling machine, picking line for finally peeled garlic cloves, and other required garlic deep management equipment. Link: http://vegetable-machine.com/project/garlic-breaking-peeling-machines-line.html Email: info@amisymachine.com

    By Amisy Machinery based in Zhengzhou, CHINA.

  • Independent particle characterization services for food and beverage industries

    PTL`s service to the food and beverage industry is consultative and exacting. Manufacturers need to identify and control particle size distribution and other physical properties of food powders and emulsions in order to control the quality of the food_beverage_particle_testing_analysisfinished product. Factors such as appearance, taste, “mouth feel”, processing and handling are all affected by physical characteristics including particle size, particle shape, surface area, thermal properties, powder flowability, and for emulsions, zeta potential.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Hydrocyclones for food and beverage applications

    FLSmidth Krebs cyclones are used in a wide range of applications in the food industry. Cyclones help protecting downstream processing equipment and reducing contaminants in food.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Root and Leafy Vegetable Processing Line

    We are devoted to designing and manufacturing turnkey projects for processing various root vegetables and leafy vegetables. The vegetable processing line can be customized according to the process requirement, vegetable types, handling capacity, workshop area, designed equipment varieties and specifications. Engineers are available for on site installation, commissioning and training. Link: http://vegetable-machine.com/project/vegetables-cleaning-processing-line.html Email: info@amisymachine.com

    By Amisy Machinery based in Zhengzhou, CHINA.

  • Odor control for the fish feed production industry

    In the Fish feed process the product is usually conducted to the dryer through pneumatic transport, after which it falls out from the dryer into the cooler. Odour sources in this process are the flash- off of the extruder, transport air, dryer air and possibly also air from the cooler.

    The amount of air per line that is emitted and should be deodorized depends amongst others of the type of dryers/coolers (vertical or horizontal), but also whether air is recycled from cooler to the dryer.

    One compact Aerox-Injector can treat the total amount of air coming from a complete production line at all times. In many cases it is even possible to treat combined airflows of multiple production lines with one Aerox-Injector!

    We are happy to advise you what (cost) technically will be the best solution. The Aerox-Injection technology prevents pollution of the Aerox-Injector by dust or greasy air in this process. This will guarantee the performance and will keep your neighbours really satisfied.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Absolute separation for the food and beverage sector

    As for firms which work in this sector, VITONE ECO produces horizontal axis centrifuges and vertical axis separators. These machinery optimize treatment processes, such as: effluents of food firms, which produce tomato puree; by-products with meat and fish; effluents of dairy firms; all kinds of vegetable juices, such as citrus fruits, wine, beer, etc.

    By Vitone Eco S.r.l. based in Bitonto, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you