Plough Equipment Near Latvia
-
Manufactured by KUHN S.A.based in FRANCE
One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - multiple working widths - a range of depth wheels (sizes, steel or rubber, position) - combined offsetting / angling - Non-Stop Hydraulic safety - long life ...
-
Manufactured by KUHN S.A.based in FRANCE
One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - 14' or 16' working widths - a range of depth wheels (sizes, steel or rubber, position) - simplified offsetting with pre-set positions for different tyre ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable for the bio-masses turning in triangulart ...
-
Manufactured by Wikar Oy Abbased in FINLAND
We at Kronos specialise in soil preparation equipment. We have many years of experience as a manufacturer of harrows behind us, having manufactured tens of thousands of them over a period of more than 80 years. Our present range of products comprises four models ranging from 3.15 m to 4.90 m in working width. The rotary harrow has undergone considerable development during these years and its ...
-
Manufactured by UAB Žaibasbased in LITHUANIA
Mounted conventional ploughs with leaf spring protection, 3-4-5 ...
-
Manufactured by Laumetris Ltdbased in LITHUANIA
of plants residuals and weed seeds, later on it increases better sprout of seeded crop. Disc harrow DSL is created for stubble razor after harvesting and soil cultivation after ploughing. First line consists of wide spring tines with collating and crumbling claws. In addition this system can be managed from tractor through hydraulic ...
-
Manufactured by JSC Lidselmashbased in BELARUS
2-share plough L-107 is intended for ploughing various soil with specific resistance up to 0.9 kg/cm2, not littered by stones at any climatic zones. Coupled with tractors of 0.9 type. There is three point hitching device for mounting a plough to the tractor. This device is equipped with a crank mechanism to adjust the pressure of the ...
-
Manufactured by JSC Lidselmashbased in BELARUS
2-share plough L-101 is intended for ploughing soils with specific resistance up to 0.5 kg/cm2 in any climatic zone on small field-plots at collective or individual kitchen-gardens. Coupled with tractors of 0.6 ...
-
Manufactured by JSC Lidselmashbased in BELARUS
It is intended for making ridges on the woods-free fields of different degree of turning or on the fellings, providing for passage of tractor-plow unit or on the cleared patches 3.5...4 m wide for sowing forest crop. It may also be used for making fire prevention ridges. The plow operates in conjunction with tractors 80-130 HP equipped by two-point hydraulic mounted ...
-
Manufactured by JSC Lidselmashbased in BELARUS
It is intended for sowing plants that need ploughing: maize, sunflower, soy, cotton, beetroot, sorgo, and other which form and weight are similar to the previous one. Simultaneous fertilization with mineral fertilizers is recommended. The drill is coupled with tractors of 1,4 kN equipped by automatic hitch, threepoint hoist and power take ...
-
Manufactured by JH-Konemarkkinointi Oy Ltd.based in FINLAND
Maintenance of yards and sidewalks: lubricated pins,absorbers on the back of the blade. Accessories: 160 ° turning angel, perforated blades, Kaikissa snowstar - työlaitteissa on vaihdettava sovitelevy. ...
-
Manufactured by JH-Konemarkkinointi Oy Ltd.based in FINLAND
Adjustable ploughing width,blade of 400 hardox. Accessories: hydraulik wing,Kaikissa snowstar - työlaitteissa on vaihdettava sovitelevy. ...
-
Manufactured by JH-Konemarkkinointi Oy Ltd.based in FINLAND
Suited primarily for ploughing roads,short frame brings power to snow removal, pushing device with flotation. ...
-
Manufactured by JH-Konemarkkinointi Oy Ltd.based in FINLAND
Maintenance of yards and sidewalks. Lubricated Pins. Absorbers on the back of the ...
-
Manufactured by METAL-FACH Sp. z o. obased in POLAND
be replaced with a bale grip, a log grip, a silage grip, a bale fork, a manure and straw fork, a pallet fork, a silage cutter, a grip bucket, a peat bucket, a snow plough, or other ...
-
Manufactured by Ursus S.A.based in POLAND
Control valves used in TUR loaders have, as a standard the 'FLOATING' function which is extremely useful while working in a contact with the ground (gathering up with the bucket, snow plough operation, etc.). On an uneven ground the 'floating' function protects the loader's tools from ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
2-Bodied, 3-Bodied and 4-Bodied Models. Robust, economical and versatile, the Standen BX Bed Former Series is engineered with a number of different options to suit every soil type so that you can be confident of creating a smooth and even ...
-
Manufactured by Brest Electromechanical Plantbased in BELARUS
Skating rink annulate and gear KP-12 frame 100×150.Five sections with rings "Cambridge" - 550/570 мм.Basic wheels – 480/45-17. Pneumatic brakes. weight - 10500 кг. It is aggregated with tractors with power from 200 ...
-
Manufactured by Brest Electromechanical Plantbased in BELARUS
It is designed for the soil cultivation after the plough with simultaneous seeding or for mulch sowing of cereals, legumes, cruciferous crops and flax. It is aggregated with the tractors of minimal capacity of 120 kWt/165 hp. It is constructed in a trailed version. The trailed version enables to decrease the load on the tractor, unlike ...
-
Manufactured by Kolaszewski Sp. z o.o.based in POLAND
Bent mouldboard. Mouldboard hydraulic control. Tilting blades. Ground following. 26° right/left working angle. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you