Irrigation Equipment In Romania
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Kit provides researchers with a powerful portable tool for assessing growing conditions in soils and substrates. The WET Kit measures and displays 3 important variables that influence plant growth: water content, temperature and pore water conductivity (ECp) – the EC of the water available to the plant. The kit comprises a WET Sensor, an HH2 Moisture Meter (readout unit) and a carry ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the ...
-
Manufactured by Plastic Pugliabased in ITALY
Brico PIPE is a black color low density polyethylene pipe, with indelible marking, manufactured with selected resins to guarantee long life and high reliability. This pipe is suitable for irrigation installations on small cultivated fields, gardens, hedges, balconies, terraces, etc. It can be used as main line or junction for drippers and Microsprinklers. Available also in brown or white color ...
-
Manufactured by Plastic Pugliabased in ITALY
HortoKIT is a system especially designed for irrigation of small orchards, even when there is lack of pressure water sources. Its main feature is the making installations based on drip irrigation technology totally powered by water gravity. The Kit consists of a Brico Aquadrop coil equipped with a series of fittings and accessories that allow to create a complete drip irrigation system on ...
-
Manufactured by Plastic Pugliabased in ITALY
AQUADROP is a thin black dripperline with a blue stripe, equipped with flat drippers, welded inside at pre-ordered, constant spacing. AQUADROP is the ideal solution for irrigation into open field or greenhouse of a variety of cultivation of horticultural plants and floriculture (like watermelons, melons, strawberries, zucchini, peppers, aubergines, potatoes, cucumbers, onions, gerberas, roses, ...
-
Manufactured by Plastic Pugliabased in ITALY
GOLD-DRIP dripperline is a black pipe with a blue stripeon top, made up of turbulent flow self-cleaning dripper’ system, which can be used on flat ground or with strong slopes. GOLD-DRIP is particularly suitable for the installation of irrigation systems on multi-annual cultivations such as vineyards, olive groves, fruit trees, etc. It is also successfully used for irrigation of ...
-
Manufactured by Plastic Pugliabased in ITALY
Brico AQUADROP is a thin-walled black polyethylene hose with a blue stripe on top, with internally welded flat drippers manufactured by pre-ordered and constant spacing. Brico AQUADROP is suitable for drip irrigation on small and medium-sized installation, garden plants, hedges, balconies, terraces, etc. The inlet filters inside the dripper and the large labyrinth reduce the risk of clogging, due ...
-
Manufactured by Plastic Pugliabased in ITALY
AQUADROP PLUS is a thin black hose with a blue stripe and flat emitters welded inside at pre-ordered constant ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Aquanet INOX are self-cleaning screen filters, suitable for the treatment of fluids containing suspended solids, also of colloidal nature. The special suction pads guarantee an efficient cleaning of the filtering element with reduced water consumption and without flow interruption. Depending on the installation requirements, it is possible to choose between two different constructive ...
-
Manufactured by Plastic Pugliabased in ITALY
Filter Body: Galvanized Steel or epoxy paint (upon request). Filter Element: Stainless steel Cartridge and 120/150 polyester screen - 120 mesh Lamellate Disk Cartridge. Discharge: BSP from ¾ "or 1". Working Pressures: 6 bar, hand closure -8 bar, bolted flange closure. Supplied Accessories:glycerine Bath STAINLESS steel Pressure Gauges (0 ÷ 10 bar) -Discharge Valve from ...
-
Manufactured by Plastic Pugliabased in ITALY
MOMO is a low density polyethylene pipe PE40, of black colour, with indelible mark and certificate of conformity issued by the Italian Institute of Plastics (IIP), complying with the rule UNI 7990:2015. MOMO pipe is mainly used in the installation of irrigation systems with high solar exposure, in the fire-fighting networks and in the pressure fluids ...
-
Manufactured by Plastic Pugliabased in ITALY
AQUAPRESS® is the latest generation dripperline with integrated flat emitter, basically equipped with three systems which guarantee functionality and reliability to long-life irrigation systems with slopes and sub-irrigation: Pressure – compensate System (PC): It assures a constant flow-rate depending on the operating pressure (0.55 – 3.50 bar), and thickness; Anti-siphon System ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Gardening ― Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
The AGRICULTURAL HOSE consists of a flexible low-density polyethylene tubular, with anti-U.V. additives, ideal for irrigation both for open field and sub-irrigation installations (under film) of a large variety of horticultural crops and floriculture, such as watermelon, melons, strawberries, zucchini, peppers, potatoes, onions, etc. The product guarantees a balanced dosage of the water and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you