Leaf Management Equipment For Landscaping In United Kingdom
-
Manufactured by Larrington Trailersbased in UNITED KINGDOM
Designed originally to carry people around a show and farm open day, the Larrington People carrier features 2 row (back to back) seating, and a full length heavy Duty Poly-WeaveLAC-640PVC canopy. Ideal for farm open days, and for transporting people during the shooting season. Both the seating and canopy can be removed easily leaving you with a Flat Deck ...
-
Manufactured by BSG Supplies Ltd.based in UNITED KINGDOM
The Transport box converts any tractor into a pick up truck, it can also tip for bulk materials such as earth or manure. For moving heavy objects it can be lowered to the ground for low loading and lifted for transport or used as a lift to transfer the load to a higher ...
-
Manufactured by Oxdale Productsbased in UNITED KINGDOM
Our Post driver is suitable for use with all tractors. The post knocker has 60kg (max) weight block which can be reduced by removing leaves. A bolt-on, side mount bracket is also available should you wish to use the post knocker with a loader or ...
-
Manufactured by Nicholson Machinery Ltdbased in UNITED KINGDOM
The Nicholson mint harvester is specifically designed to remove leaves from the stalks with minimal damage to the leaves and to allow regrowth. Working at 2.4 metres wide and up to 5km/h ground speed, the machine can be used for a variety of crops requiring gentle leaf ...
-
Manufactured by Stocks Sweepers Ltdbased in UNITED KINGDOM
Our patented leaf blowing system is the most effective method of removing leaves in rural/semi-rural conditions. It blows leaves off roads and footpaths into verges in one pass, by cleverly using the sweeper vacuum exhaust air, blowing it out from under the front of the chassis cab. Full electric control allows you to adjust the air jet angle to right where you need it. It reduces nonproductive ...
-
Manufactured by Overton UK Ltdbased in UNITED KINGDOM
The new Terrier T-7 Vacuum leaf loader uses the tried and tested formula of the Terrier T-9 but uses a slightly smaller 7HP Vanguard petrol engine, this gives it the benefit of being a more compact and lighter unit and is supplied with a 6 inch (150mm) diameter wander hose. The T-7 has a CFM rating of 2600ft³ per minute (73.6m³ per minute) This is an approximaite figure during normal ...
-
Manufactured by Kirkland UKbased in UNITED KINGDOM
The Olmi orchard & vineyard de-leafers ensure optimal development and can save up to 30% of time compared to manual harvesting. The air that’s produced hits the leaves ensuring a gentle but effective leaf removing system and eliminates moisture so a greater cleanliness of the crop can be reached, also fungicides and other impurities in the tanks of the harvesters can be reduced for vines & ...
-
Manufactured by Hayter Limitedbased in UNITED KINGDOM
The Harrier 48 rear roller rotary lawnmower is ideal for medium to large lawns. The rear roller on these powerful self-propelled machines, gives a superb striped finish to fine lawns and with the cutterblade raised, rougher areas can also be cut with ease. With its powerful collection abilities, autumn leaves can also be removed from the ...
-
Manufactured by Labman Automation Ltdbased in UNITED KINGDOM
Labman built a multi-bladed cutting block which is mounted on a stand and integrated with a set of vacuum pads. Leaf material (e.g. wheat leaf) is clipped onto the block and with a swing of the lever the knives cut the sections which are held by the vacuum pads. In a second action these cut sections are lowered onto agar and released so that, in under 20 seconds, a full set of 24 perfectly sized ...
-
Manufactured by Modulambbased in UNITED KINGDOM
Award winning Mobile sheep handling trailer. Modulamb built trailer approved by DVSA as road legal. System complete with 3 way drafting race, working race and penning hurdles. Trailer width 1.8m over wheels, length 4.5m to tow-ball. Trailer fitted with quality Modulamb handling equipment. Handling equipment removable to leave a 0.90m high sided trailer. Basic trailer suitable for 100 ewe unit. ...
-
Distributed by The Grass Groupbased in UNITED KINGDOM
The small Trilo vacuum units have been developed to allow rapid vacuuming of leaves, litter, grass, wood chippings etc. The machine is installed onto a quick transport undercarriage with rotating nose wheel. Couple it, take it with you and start working. The balanced fan and dual-walled pump housing provide for a resistant, reliable and most importantly, safe power source. Drive is provided by a ...
-
Manufactured by HM Trailersbased in UNITED KINGDOM
Chassis - HM chassis are made from 55 grade (structural) rectangular hollow section. This gives greater strength and does not allow a build up of material on ledges. Running Gear - HU 4/5/6 are single axle, ag spec, unless high speed is requested. HU 8/10 are twin axles with ...
-
Manufactured by Cub Cadetbased in USA
Clear large yards quickly and efficiently with Cub Cadet leaf blowers, available in handheld, backpack and wheeled models. Every time you use one, you'll experience the strength of our line of leaf blowers in their power, comfort and ...
-
Manufactured by Pellenc SAbased in FRANCE
With a cleanliness rate of 99.82% in the bin, the harvest can go straight into the vat. Principle proven by over 1500 ...
-
Manufactured by Billy Goat Industries, Inc.based in USA
The 27” TKV lawn and litter vac offers an integral on-board 2” chipper. Now you can add branches to all your leaf, seed, blooms, mulch, litter and debris cleanup jobs. The TKV is ideal for residential and property maintenance and the self-propelled power takes the chore and fatigue out of hilly turf cleanup. An optional hose kit helps between shrubs, beds and under decks or utilities. ...
-
Manufactured by Billy Goat Industries, Inc.based in USA
An ideal combination of power and size, at 2,000 cfm of commercial suction, these units are perfect for small to mid-size jobs and crews. Light weight and low overall cost, this unit will get you into the game of production leaf or debris removal. A dual shredding 14.25” diameter armor plate impeller with Piranha™ blade that reduces debris up to 12:1 and maximizes trailer loading ...
-
Manufactured by Pellenc SAbased in FRANCE
Specifically developed for super-intensive plantations. The lightest PELLENC carrier on the market with its special olive harvest head (empty weight 10.5 t) ensures undamaged olives and unparalleled work ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you