Plough Equipment Near Iceland
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
2-Bodied, 3-Bodied and 4-Bodied Models. Robust, economical and versatile, the Standen BX Bed Former Series is engineered with a number of different options to suit every soil type so that you can be confident of creating a smooth and even ...
-
Manufactured by Kverneland Groupbased in NORWAY
Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to knock on and off the parts within seconds. The Knock-on® ...
-
Manufactured by Kverneland Groupbased in NORWAY
Kverneland re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or 2nd stubble ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The 4600 series completes Valpadana’s range of equal-wheel tractors in the low-power range. These compact tractors provide superior performance and unique technical features. Supplied in a variety of configurations, with either equal wheels or oversized rear wheels, they are specially designed for intensive crop cultivations such as orchards and vineyards, greenhouses and nurseries, as well ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The 4600 series completes Valpadana’s range of equal-wheel tractors in the low-power range. These compact tractors provide superior performance and unique technical features. Supplied in a variety of configurations, with either equal wheels or oversized rear wheels, they are specially designed for intensive crop cultivations such as orchards and vineyards, greenhouses and nurseries, as well ...
-
Manufactured by Kongskilde Agriculturebased in DENMARK
The concept behind the Germinator Pro series from Kongskilde is to offer a solution for creating a high quality seedbed in ploughed conditions. The yield achieved in high value crops such as sugar beet, onions etc. bears close correlation to the level of preparation of the seedbed. Higher crop prices in general place additional ...
-
Manufactured by Kongskilde Agriculturebased in DENMARK
The Överum CT-series consists of models from 2 – 5 furrows with fully automatic hydraulic stonerelease system (H), or fixed beam version with shear bolts (F). Överum CT is designed with focus on strength and clearance, for long life and trouble-free operation. Long interbody clearance gives free flow for crop residues and enough room for modern effective skimmers. The frame design ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The Juwel generation of mounted reversible ploughs combines reliability of use, operating comfort and high work quality in an unrivalled manner. The TurnControl rotation control makes plough rotation particularly safe, and the large clearance between the support wheel and ground additionally contributes to ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The Diamant 11 is LEMKEN’s answer to today’s large farms demanding implements that are easy to operate and offer high ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The integrated FixPack furrow press remains connected to the plough at all times. The press remains with the plough during road transport or on the headland saving valuable time. It can be used with three, four and five furrow mounted reversible ploughs with up to 2,5 m working ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
Perfect ploughing means optimal quality of work with maximum acreage performance while keeping fuel consumption and driver loads as low as possible. The Diamant 12 meets this challenge optimally by providing numerous smart features in addition to the proven qualities of the Diamant ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
Plough press or as front furrow press, single- or double-row, with 700 mm or 900 mm ring diameter, with 30° or 45° ring profile, LEMKEN has the right solution for any ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
Varying soil and weather conditions call for an easy-to-operate cutting width adjustment, which makes a significant contribution to arable farming that is both environmentally friendly and economic. The VariTitan is available in versions with nine to twelve furrows and working widths of up to 660 cm for maximum acreage ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The increasing traction produced by modern tractors places particularly high demands on plough stability when combined with large working widths. With a bolted frame and high-quality fine-grained steels, the EuroTitan ploughs with nine to twelve furrows are designed for very high continuous ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The Heliodor compact disc harrow can be used for shallow stubble cultivation on light and medium soils, and for seedbed preparation before mulch sowing, or after ploughing. This means the Heliodor can be used in both conventional and mulch sowing systems. High working speeds and a low power requirement give high-performance ...
-
Manufactured by Murray Machinery Ltdbased in UNITED KINGDOM
The Murray Snow Blade comes in various widths and sizes. The blade can be fixed left or right, or can have a manual slew left or right by removing a pin, or can be activated by a double acting hydraulic cylinder. All blades can be fitted with a replaceable rubber edge and castor wheels. Snow Blades can be fitted to tractors, loaders or telescopic handlers ...
-
Manufactured by Murray Machinery Ltdbased in UNITED KINGDOM
The Murray 'Vee' Snow Plough is designed to clear deeper snow than the smaller snow blade, therefore is more heavily constructed and has replaceable ware plates bolted along the bottom edges. They can be supplied to clear various widths, and can be fitted to the front or rear of any tractor or telescopic ...
-
Manufactured by Etesia UKbased in UNITED KINGDOM
The front-mounted scarifier attachment, which can be quickly fitted with no tools, has two fully-floating heads which allows it to follow ground contours. It has a working width of 1.25 metres and has been specifically designed for fast and effective coverage on large areas such as sports grounds and large ornamental lawns. Fits all Hydro 124 models (Front linkage kits may also be required). Many ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
Hydraulic Folding With Transport Locks. 1000 RPM Gearbox. 2 Speed Gearboxes. Cam-Type Safety Clutch Protection. Side Transmission With Gears. Spring Loaded Adjustable Tailgate. Rotor With welded Double Flanges. "C" Shaped 10mm Thick Blades. Rear Linkage With Depth and Pitch Adjustment. Suitable For Bed Widths up to ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
The markers are suitable for marking out as far as 24 feet from the centre of the tractor. This allows 4 ploughs down on 72 inch beds. The markers can also come in to 18 feet from the centre of the tractor for bed making using half depth. Both the left side and the right side markers can be operated without leaving the tractor seat. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you