Cultivator (Soil Conditioning) Equipment
-
Manufactured by TerraTech Ltdbased in UNITED KINGDOM
Designed to meet the widest range of cultivation needs, especially seedbed preparation in difficult or minimally-tilled land. The PRESS-IT can be configured to suit individual soil types & conditions which means improved clod breakdown & increased consolidation and moisture ...
-
Manufactured by Bulagro ADbased in BULGARIA
70% of the weeds can be destroyed with mechanical weed control. The remaining 30% do not damage the culture plant decisively. From the mentioned 70 %, 70 % of the weeds are covered in the germination stage and only 30 % of the weeds are destroyed by being pulled ...
-
Manufactured by Shri Sai Agro Equipments Pvt. Ltd.based in INDIA
Spring Cultivator has been designed to deliver sturdy performance at varying soil conditions. Heavy duty channel mainframe and tine assembly resist heavy bending strains. Heavy duty dual springs retain their strength for longer life and ensure safety of shovels from heavy ...
-
Manufactured by Shri Sai Agro Equipments Pvt. Ltd.based in INDIA
Rigid Cultivator is capable to withstand tough working conditions at heavy soils. With deep positive penetrations it can break up hard soil and uproot stubbles to leave the ground perfectly worked. With the spacing adjustments of tine on the frame it can be used for multiple no. of applications and even for paddy cultivation requiring ...
-
Manufactured by Kverneland Groupbased in NORWAY
Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to ...
-
Manufactured by ILGI Agricultural Machinerybased in TURKEY
It has a large usage alternatives on soil processing especially for seed bed preperation and stubble processing. It decreased the product costs by its combined design.Requested soil processing quality can be reached if it is worked until 15km/h according to soil conditions.The high working capasity brings low costs and low fuel. 510mm notched discs had been tied to frame with rubber roll ...
-
Manufactured by James Engineering Ltd.based in NEW ZEALAND
Removes plough pans. Reduces cultivation time to form seedbed. Combines aeration and cultivation in one pass. Increase oxygen supply to the soil. Improves soil water storage. Minimises breakdown of soil structure. Increases crop yields and ...
-
Manufactured by B. W. Implement Companybased in USA
The BWI line of power cultivators is second to none. These high-performance mulchers break up the heaviest soils for better planting performance and controlled work tillage depth, regardless of the soil condition. This also allows you to set planters, cultivators, and harvesters at one constant depth. High-Performance Farm Machinery for Fast ...
-
Manufactured by OPaLL-AGRI, s.r.obased in CZECH REPUBLIC
The SATURN IV combined cultivators are representatives of advanced technology for perfect sowing soil preparation. A suitable combination of working bodies results in creating a uniform seedbed during one crossing of the field. These are passive cultivators for complete seedbed preparation. The required quality of work is achieved with ...
-
Manufactured by Oliver & Dahlman Equipment Co., Inc.based in USA
Heavy-duty Cat II / III Welded 3 Point Hitch. The extended A-Frame allows the gangs to be mounted in the front or the rear of the tool bar. Folding wing models are operated by two 3-1/2” x 16” 3000 p.s.i. Hydraulic cylinders and are double hinged for added strength and durability. 3 and 5 Row Models, 4” x 7” x 3/8” Tool Bar for Strength and Durability, Heavy-duty ...
-
Manufactured by Enorossibased in ITALY
Enokrunken is a disc machine designed for surface working of the seedbed (up to 18 cm.). The discs are placed in two rows at opposite directions; the wide spacing’s of 250 mm minimizes any possible ground or crop residues clogging. Every disc has a independent hub with an SKF oil bath sealed bearing, which guarantees maximum strength and the minimum demand for maintenance. The elements are ...
-
Manufactured by Bednar FMT s.r.o.based in CZECH REPUBLIC
The TERRALAND DO is a robust, combined (discs and tines) machine which can be used for cutting and tilling large amounts of post-harvest residues in a single pass and mixing them thoroughly with loosened soil up to max. 45 cm (Active-Mix tines), or for deep tillage of land without mixing the soil (Zero-Mix tines) also up to a depth of 45 cm. The machine can be equipped with 2 types of rear ...
-
Manufactured by AMAZONEN-Werke H. Dreyer GmbH & Co. KGbased in GERMANY
The diverse Cenius range offers, with its Cenius mounted models as well as the trailed Cenius-2T/Cenius-2TX cultivators in working widths from 4 m to 8 m, the possible solution for virtually all farm sizes. Thanks to the versatile levels of equipment available, almost any demand can be fulfilled and at the same time perfect working ...
-
Manufactured by Perrein SASbased in FRANCE
Don’t lose time and work in all conditions, the Cultipass cultivator and its Quick Roller Swap system is available! Cultipass can operate at shallow or deep depth, always with a high quality result. The patented Quick Roller Swap system allows you to always have the right roller whatever the soil / weather / crop ...
-
based in AUSTRIA
The Hatzenbichler cultivator are established since more than 60 years on the market. Through years of experience and constant modification of the cultivator it´s become a perfect machine for seedbed preparation. Working widths of 2,35 m up to 8,00 m with 3-point hitch and pull type cultivator of 10,00 m up to 12,00 m. The machines are ...
-
Manufactured by Farmet a. s.based in CZECH REPUBLIC
Krtek is especially suitable for deep cultivation of compacted and impermeable layer of soil. It significantly improves absorption of compacted and wet soil. Loosening of subsoil layer is performed without risk of mixing of biologically inactive soil with ...
-
Manufactured by OPaLL-AGRI, s.r.obased in CZECH REPUBLIC
Combined cultivators NEPTUN-SATURN IV are machines with unique technology of the arrangement of working parts to create a precise seedbed. The ingenious concept is suitable for any type of soil thanks to a wide range of equipment and ...
-
Manufactured by Väderstad ABbased in SWEDEN
High capacity - low draught requirement: Swift is a trailed tine cultivator, designed to perform at peak level in both wet and dry years. The models in the product family span from 4.0 to 8.7 metre working width. You benefit from a spacious design, which can handle large quantities of crop residues. The narrow tine spacing ...
-
Manufactured by ILGI Agricultural Machinerybased in TURKEY
Heavy cultivator APOLLO can be used for several soil processing with its compact and combine structure. It can be provided an effective soil processing on stubble processing after harvest. It is processed with on requested depth by tearing without tipping the soil. The stubble is mixed to soil by being cut from its root, it becomes ...
-
Manufactured by AVR bvbabased in BELGIUM
When cultivating potatoes, the preparation of the seed bed is crucial. A good soil structure ensures a good water management and temperature in the ridge, which in turn have a positive influence on the tuber setting and prevent tuber deformation. Also important: an optimal crumbling while planting is the first step towards a successful ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you