Installation and use of organic fertilizer cooler
The cooling machine of organic fertilizer accelerates the air flow in the rotary cylinder through the suction of the matching use of the mesh guiding machine and the equipment, and constantly turns the materials up through the lifting plate installed on the rotary wall, so as to achieve the cooling purpose. The organic fertilizer machine is mainly used for the production of organic fertilizer, compound fertilizer and compound fertilizer to cool the fertilizer particles. In the fertilizer production process, the rotary cooler and dryer are used together, which can greatly improve the cooling speed, increase the output, further remove some water and reduce the grain temperature of the compound fertilizer. The rotary cooler can also be used for cooling other powdery and granular materials. The organic fertilizer machine has compact structure, high cooling efficiency, reliable performance and strong adaptability.
Installation and commissioning:
1. Installation: the machine is installed in coordination with the process flow, indicating the elevation and horizontal position, and the inclination is generally 2-5 degrees (the user can adjust it as required).
2. The bracket and transmission frame of the machine have ground holes, which can be installed on the concrete.
3. Commissioning: after the installation of the dryer, it is necessary to check whether all parts of the dryer are fastened first, then conduct no-load test run, and observe whether the steering direction is correct, if not, adjust it. The noise of the gear should be even, not high or low.
1. Check whether there are sundries in the machine before starting
2. Check whether all parts of the machine(organic fertilizer granulator) are normal
3. After the machine is started, check whether the rotation direction is correct. If it rotates in the opposite direction, stop the machine immediately for adjustment. Start production after confirming smooth rotation, no noise and no friction noise
4. Do not allow iron, stone, wood and other sundries to enter the machine to prevent damage to the equipment
5. The gear oil must be added once before the reducer is used for production and use. The gear oil shall be replaced every four months
6. Before the shutdown, the internal materials must be drained out and shut down again to prevent the materials from sticking in the cylinder body, and make preparations for the next startup, so as to facilitate the next team production.
Zhengzhou Tianci Heavy Industry Machinery Co., Ltd. specializes in the production of fermentation compost windrow turner, fertilizer granulator, fertilizer crusher and other organic fertilizer machines. We also provide a complete set of organic fertilizer production process, npk fertilizer manufacturing process, biofertilizer project production process, BB fertilizer production equipment. We have been stepping forward the pace of machine progress, hoping to use the best fertilizer equipment to feed back our users!