Forestry Skidding Equipment For Forestry In Australasia
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
A modular process skid is a processing system which is contained within a frame, making it easier to transport and install. Individual skids can contain anything from a single heat exchanger and ancillaries to complete and more complex systems where the skid typically contains process equipment, controls, monitoring equipment and ancillaries. Process skids provide a ‘plug & play’ ...
-
Manufactured by Savannah Global Solutionsbased in USA
Designed for lowland operations where a large mound is required to raise the planting site above wet season inundation. These trailing plows are fitted with either flotation tires, or full width rollers to carry the plow and are connected to the drawbar of a tractor or dozer. Horsepower requirements depend largely on spee d and depth of cut, as well as soil type. Ideally, bedding plows operate ...
-
Manufactured by El-Gra Implementsbased in AUSTRALIA
The highly efficient front-mounted Series 89 post driver, has been specifically designed for use on Skid-Steer machinery. This post driver design, allows for front mounting on Bobcat, Caterpillar, Komatsu and other compatible Skid Steer machines. Series 89 Post Driver with Skid Steer Hitch, has all the functions and features of the Standard 89 driver including the Auger Arm and Auger Down Force. ...
-
Manufactured by Savannah Global Solutionsbased in USA
Trailing 10-disk stump-jump Disk Harrow fitted with 36" disks. Cuts 10-12 inches deep first pass, 14-16 inches second pass. Cuts 9.5 ft wide at speeds up to 5 mph (8kph). Designed to run on 250hp or greater 4wd Tractors or Forestry Skidders. Weight 15,000 ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
The Tigercat 604C cable skidder is a powerful, yet compact machine suited to high value selective cut hardwood logging and steep slope applications. With high quality components and construction, the 604C is designed for long service life and high uptime.Turnaround™, the new two-position rotating seat, is standard equipment for the 630D. With all controls available, the operator can ...
-
Manufactured by Farmforcebased in AUSTRALIA
Forward and reverse, hardened chuck. Supplied with 4m Hydraulic line and standard breakaway fittings. Can be run off and hooked-up to most Tractors and Skid Steers. Built to with-stand many years of hard ...
-
Manufactured by John Deerebased in USA
Loggers demand maximum productivity and uptime out of their equipment shift after shift. And the 903K Tracked Feller Buncher delivers, big time. It features a powerful fuel-efficient engine, fast hydraulics for superb multifunction operation, deep cutting swath, and best-in-class head accumulation for maximum productivity. Quick, wide-open access to service items and major components along with ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
Tigercat's innovative line of patented bunching saws, significantly improves the productivity of the entire harvesting system in high volume plantation applications. Buncher productivity increases because more trees can be cut per cycle reducing unnecessary machine movement. Skidder productivity is improved because the bunches are large, well aligned an easy to pick up.The 5000 bunching shear is ...
-
Manufactured by El-Gra Implementsbased in AUSTRALIA
The Latest In Skid-Steer and Excavator Post Drivers. Hot off the assembly line, this revolutionary post driver from El-Gra has been specifically designed for operation by Skid-Steer and Excavator equipment. Able to be operated from within the cabin, the Series 90 driver offers greater comfort, ease of use and safety to the operator. Removing the need to stand on the ground to operate the driver, ...
-
Manufactured by FAE Group S.p.A.based in ITALY
Brush mulcher with hammer/flail rotor for skid steers. A universal mulcher suitable for mulching saplings bushes, crop residues and grass. Thanks to its “floating system”, the mulcher’s rotor adheres perfectly to the terrain, ensuring a homogeneous material after mulching. The support roller, larger in comparison to other attachments, guarantees the best performance even on ...
-
Manufactured by Degelman Industries Ltdbased in CANADA
The 3500 series blade by Degelman is the best blade you can get for the 40-100 horsepower range. We can say with confidence that this the most rugged blade you'll find in this category. Designed for 40-100 horsepower 2WD tractors, skid steers, front-end-loaders and most front-wheel-assisted tractors, the 3500 series gives you the robust blade design Degelman is known for in a compact ...
-
Manufactured by KerFabbased in AUSTRALIA
Ideally suited for small farms and construction sites, the A Series is the perfect multipurpose attachment for small tractors and skid steers. The A Series is designed to dig, scoop, dump, and bulldoze material as well as grapple green waste and clamp large rocks, tree trunks and logs. It can also be used as a blade to scrape, level and spread to even out the ...
-
Manufactured by DC Equipment LTDbased in NEW ZEALAND
The Falcon Winch Assist has been designed and tested through thousands of operational hours in a wide range of slope and soil conditions. As a result, we’ve developed a number of safety features to eliminate operator risk. With over 480,000 operational hours and zero harm incidents, the Falcon Winch Assist is the choice for mechanising your logging ...
-
Manufactured by Fieldmaster Ltdbased in NEW ZEALAND
The perfect solution for skid steer machines - Tough laminated pressed steel deck with sub-frame stress brace monocoque system. Heavy duty cushioned hydraulic drive train. Adjustable height high clearance skids and Front and rear safety guards. Heavy duty adjustable height puncture proof (urethane filled) castor wheel/s and Industry standard quick hitch skid steer mount plate. HYDRACUT 1500-S ...
-
Manufactured by Degelman Industries Ltdbased in CANADA
Degelman Industries is proud to introduce the Strongbox. Faster and efficient. This box blade is a simple, strong and effective tool for high volume snow removal and is so unique it has four patents behind the name. Strongbox is quickly and easily adaptable to all payloaders, backhoes, skid steers and most Ag tractors. No matter what you use to push snow, we guarantee a quality, secure ...
-
Manufactured by Savannah Global Solutionsbased in USA
Eco-Til is a patent pending High Impact, Minimal Tillage technique used when mounted behind a sub-soil plow and closes the rip-line and thoroughly fractures soil without any inversion. This technique uses offset coulters mounted in a Stump Jump™ configuration to harness the effect of lateral forces that thoroughly break soil bulk density uniformly across a 650cm wide x 40cm deep zone. ...
-
Manufactured by John Deerebased in USA
Geofence, Machine grouping, Alert escalation logic, Dealer data services/third party ...
-
Manufactured by John Deerebased in USA
The 312GR gives you a basic skid steer with a radial-lift boom. The radial-lift boom provides powerful digging performance and generous lift height at a competitive price. Equipped with manual controls and a fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV diesel engine, it is easy to operate and own. Plus, you can work in comfort with productivity-enhancing legroom and clear sightlines to the ...
-
Manufactured by John Deerebased in USA
Incorporating many of the same durability and reliability features found on our larger machines, the 314G is as tough as they come. The redesigned vertical-lift boom rises up to 10 ft. to precisely places pallets. A smooth-running turbocharged 2.1-L EPA Final Tier 4 (FT4)/EU Stage IV diesel engine meets rigid emission standards and packs plenty of power and torque. Keep downtime down with sealed ...
-
Manufactured by KerFabbased in AUSTRALIA
Ideally suited for small farms and construction sites, the A Series is the perfect multipurpose attachment for small tractors and skid steers. The A Series is designed to dig, scoop, dump, and bulldoze material as well as grapple green waste and clamp large rocks, tree trunks and logs. It can also be used as a blade to scrape, level and spread to even out the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you