Timber Equipment For Forestry In Estonia
-
Manufactured by As Fors MWbased in ESTONIA
FARMA Generation 2 - Innovative trailer series!. FARMA proudly presents our new design-protected series of lumber trailers under the concept FARMA Generation 2. Trailers based on user experience. This is a completely new and innovative design, mainly thanks to the octagonal, bent, centre profile, which gives a more durable design that also means the central section glides more easily over high ...
-
Manufactured by BMF (OÜ Lisako)based in ESTONIA
Timber crane with telescope, max reach 6,5m. Timber crane for your forestry. This crane comes with a telescope and a max, reach up to 6,5m. This crane is a high-performance machine featuring quality workmanship. Expandable with our accessories ...
-
Manufactured by BMF (OÜ Lisako)based in ESTONIA
Timber crane with wide-angle joint and telescope, max. reach 7,2m. Our timber crane comes with wide-angle joint and telescope. The crane has a 7,2m max. reach and was designed for semi- and professional forestry. Expandable with our extensive accessories ...
-
Manufactured by Scandicon OÃœbased in ESTONIA
Scandic ST-12D forest trailer is designed to withstand heavy use as it is further strengthened by a powerful double beamed frame. It is preferred by professionals due to its 12.000 kg loading capacity and extra-large loading area that allows carrying up to 6m timber or a double load of 3m timber. Its’ perfect output is clearcutting works and forest thinning, but it is also an indispensable ...
-
Manufactured by Teknamotor Sp. z o.obased in POLAND
SKORPION 280 SDBG is the smallest produced by Teknamotor drum-type chipper. Large loading table, 265 mm wide and 190 mm high inlet allows chipping branches with offshoots (with leaves and needles) as well as a round timber of the diameter up to 180 ...
-
Manufactured by As Fors MWbased in ESTONIA
FARMA proudly presents our new design-protected series of lumber trailers under the concept FARMA Generation 2. Trailers based on user experience. This is a completely new and innovative design, mainly thanks to the octagonal, bent, centre profile, which gives a more durable design that also means the central section glides more easily over high stumps and rocks. In its basic version, the trailer ...
-
Manufactured by As Fors MWbased in ESTONIA
FARMA Generation 2 - Innovative trailer series!. FARMA proudly presents our new design-protected series of lumber trailers under the concept FARMA Generation 2. Trailers based on user experience. This is a completely new and innovative design, mainly thanks to the octagonal, bent, centre profile, which gives a more durable design that also means the central section glides more easily over high ...
-
Manufactured by As Fors MWbased in ESTONIA
FARMA is proud to present our new professional lumber trailer series under the concept FARMA Generation 2. We start up by introducing the two trailer sizes T-10 and T-12. They have an entirely new and innovative design to satisfy its ...
-
Manufactured by Hekotek ASbased in ESTONIA
Engineering design of advanced, fully automated lines by Hekotek is always based on our customers’ needs and technical requirements to ensure best possible solution for each and every ...
-
Manufactured by Palax Ylistaron Terästakomo Oybased in FINLAND
X-Aim monitors the diameter of the log and automatically adjusts the splitting wedge to the optimum height. X-Aim allows the user to concentrate on feeding wood from the log table to the firewood processor and cutting. Thus X-Aim enables ease of use and adds efficiency to the firewood production. The splitting is automated and results in consistently high quality firewood despite the varying ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Models 100 H, 120 H, 100 4WD, and 120 4WD are dual-beamed. This has made it possible to keep the trailer frame structure low and the trailer's centre of gravity low also when carrying a load. The sturdy structure of the trailers is able to accommodate even the heavier loader ...
-
Manufactured by John Deerebased in USA
Since its introduction in 1996, the John Deere 1270 Harvester has dominated harvester sales worldwide while setting the standard for durability and performance. And now the latest 1270E is the most powerful and productive yet. With its large 9.0-liter engine and CH7 Harvester boom, the 1270E performs at a level normally reserved for larger size-class harvesters. It is plenty powerful to handle ...
-
Manufactured by Wikar Oy Abbased in FINLAND
The KRONOS 140 4WDM forestry trailer has a sturdy set of bogey axles based entirely on mechanical transmission, with the power generated by the drive shaft being transmitted via a drive gear and a differential gear system to the bogie housings on both sides of the machine. There is no elastic or disc clutch inside the bogey housing, the gears being in constant contact with each other. Road safety ...
-
Manufactured by Hypro ABbased in SWEDEN
The wheel carried 755 only adds 200 kg to the tractor hitch. This makes it very suitable for use with lighter tractors. Nimble and easily manoeuvred with articulated steering, this processor is very suitable for use on sensitive terrain since the weight is spread over several wheels. It is driven by the power take-off via a wide angle shaft, and the pump and tank are both mounted on the ...
-
Manufactured by Farmikko Oybased in FINLAND
Weight approx. 43 kg. Maximum opening approx. 82 cm. Maximum operating pressure 210 ...
-
Manufactured by Wikar Oy Abbased in FINLAND
KRONOS 6020 is designed in accordance with the wishes of professional users. The sturdy crane booms and high quality hydraulic components guarantee efficient working hours for the years ahead. Hydraulic hoses are well shielded inside a protective cover. The hoses are dimensioned for large amounts of oil flow to the grapple. This enables the efficient use of diversified felling and energy grapples ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
The forwarder is equipped with 8 wheels and a load capacity of a full 14 tonnes. Hydraulically operated headboard and front bunk makes Rottne F13D very versatile when handling different timber lengths. The forwarder can alternatively be equipped with width adjustable load bunks (Wide Load) and hydraulic stakes, which increases its flexibility and load capacity from 4,7 m2 to 5,5 ...
-
Manufactured by Hypro ABbased in SWEDEN
HYPRO 765 is a delimbing and debarking tractor processor with crane. It is mounted on the three-point-linkage of a tractor. The crane has a total reach of 7 meters and both the crane and the processor have a remarkable working radius of 280°, which allows felling on both sides. The lateral movement provide generous adjustment to suit the direction of the fallen tree and allow distances of up ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
ROTTNE F10D is the sequel to the popular Rottne F10B and has all the features demanded of a genuine thinning forwarder. Stability, flexibility and good tracking together with low ground pressure and good bearing capacity are typical characteristics for this ...
-
Manufactured by Logset Oybased in FINLAND
The Logset 8H GTE Hybrid is a powerful medium-sized harvester that doesn’t slow down under pressure. The machine´s diesel engine runs at a constant pace, while the hybrid system provides up to 104 kW (142 hp) of additional power required in a typical felling and processing cycle. This allows the hybrid harvester to easily perform several tasks at the same time, while keeping the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you