Greenhouse Irrigation Equipment For Horticulture In Europe
-
Manufactured by The Toro Companybased in USA
Unique straight-through flow path provides low-pressure loss and superior regulating capabilities. The 700 Series Ultra-Flow valves are ideal for low flow applications found in nursery and greenhouse drip irrigation ...
-
Manufactured by Europer Perlitebased in TURKEY
Perlite with a total porosity above 90% and a porosity of about 60% provides soil aeration and regulates drainage. Perlite with a total porosity above 90% and a porosity of about 60% provides soil aeration and regulates drainage. Perlite increases infiltration, reduces evaporation. Provides economy in ...
-
Manufactured by Debets Schalke BVbased in NETHERLANDS
Water saving: The rapidly growing population of the Earth requires enhanced agricultural innovation to scale up production with limited resources. Greenhouse cultivation reduces water consumption as compared to open-air farming. There are four primary reasons: 1) plants lose less water through evapotranspiration, due to the decreased wind, increased humidity, and regulated temperature in the ...
-
Manufactured by VYR SAbased in SPAIN
General Properties:. Pop-up spray sprinklers for residential and urban use.. 1/2” female connection. Made of Delrin plastic.. Stainless steel spring with continuous tension.. Anti-sand rubber seal.. Removable grit filter for maintenance cleaning.. Check valve for 6 m of water colunm retain (optional).. TECHNICAL SPECIFICATIONS:. Reach: 3 - 5.5 m / 98, - 18 ft. Flow: 240 - 1200 l/h ...
-
Manufactured by Climate Control Systems Inc.based in CANADA
The Fertigation Manager is a greenhouse fertigation machine that offers some of the most advanced greenhouse irrigation system with all inclusive computer automation software and ...
-
Manufactured by Poelsan Plastic San.Tic A.S.based in TURKEY
Poelsan compression fittings should be kept away from hard or sharp objects during storage or installation phases. If the installation will be under the ground, it should be covered with sand in order to keep away from contact with hard and sharp objects. Damaged fittings shouldn’t be used ...
-
Manufactured by Poelsan Plastic San.Tic A.S.based in TURKEY
Poelsan compression fittings should be kept away from hard or sharp objects during storage or installation phases. If the installation will be under the ground, it should be covered with sand in order to keep away from contact with hard and sharp objects. Damaged fittings shouldn’t be used ...
-
Manufactured by LA.RE.TER. SPAbased in ITALY
Dripperlines of polyethylene and fittings for drip irrigation in agriculture and ...
-
Manufactured by Amiad Water Systems Ltd.based in ISRAEL
Multi-screen polymeric, self-cleaning filter combining Amiad’s suction-scanning screen technology with an innovative compact design, a single hydraulic turbine and a smart ...
-
Manufactured by Novedades AgrÃcolas S.Abased in SPAIN
This polytunnel greenhohuse also called chapel or multi-span greenhouse, is characterized by the shape of its roof, formed by semicircular curved arches and its all-metal structure. This type of greenhouse would falls into the category of what are commonly referred as multitunel, like Asymmetrical or Tropical and Gothic greenhouses. These type greenhouses are assembled like a Meccano. The ...
-
Manufactured by Poliext Kft.based in HUNGARY
Produced from a softer material. High impact resistance and weathering, make them ideal for the most demanding application. Unlike steel, PE Pipes can easily bypass obstacles in their path and can withstand movements in the ground around them. The field of use is turf irrigation, open-field irrigation, ...
-
Manufactured by Sistema AZUD, S.A.based in SPAIN
Ø 16 Models: 1.6L - 2.2L - 4L Nominal Thickness: 0.9 mm - 1 mm. Ø 20 Models: 2.2L - 3.4L Nominal Thickness: 1 mm - 1.2 mm. After 25 years in the market, the results are the most important factor, and the ones obtained by AZUDRIP have been excellent for this period of time. Therefore, nowadays is one of the best selling turbulent flow driplines in the world, leader in more than 20 ...
-
Manufactured by IRRITEC SpAbased in ITALY
P5, the result of Irritec’s research and experience, an excellent greenhouse and open field drip irrigation system suitable for most crops. The latest generation light dripline that fully meets drip irrigation needs, guaranteeing all the requirements necessary in terms of operation and practical use. P5 offers state of the art characteristics and meets the highest quality standards ...
-
Manufactured by NaanDanJain - Jain Irrigation Systems Ltdbased in ISRAEL
AmnonDrip PC, CNL & PC AS THICK-WALLED PC FLAT DRIPLINE. Innovative, pressure-compensating (PC), dripline with special anti-syphon (AS). and compensating non- leakage (CNL) models. Cascade labyrinth feature incorporated in all ...
-
Manufactured by A.A.S. Advanced Automation Systems Ltd.based in CYPRUS
Ultra slim high-tech concept, laser welded with long-life material that fits any hose diameter. High accuracy, consistent clog-free ...
-
Manufactured by VYR SAbased in SPAIN
Reach: 3 - 5.5 m. Flow: 240 - 1200 l/h (depending on nozzle type). Working pressure: 1 - 4 bar. Area: Full or part circle. Nozzles: Four nozzles of 360º, 180º, 90º and adjustable 0º - 360º. Trajectory angles: 30º. Maximum spray height: 1.2 m. Flow regulation: From total closure up to 15 VAN. Uniformity coefficient higher than 90% in areas of 4x4R, 5x5T, ...
-
Manufactured by GREENCONbased in TURKEY
The irrigation system in the greenhouse is like the blood circulation of living things. It is vital. Just like arteries and veins, it should work together in ...
-
Manufactured by GREENCONbased in TURKEY
Our range of greenhouse cooling equipment is the result of tens of thousands of square meters of experience working in hot countries. It offers the quality and materials you ...
-
Manufactured by AGROinventbased in GREECE
Hydria 4+ Touch is a revolutionary fertigation system for greenhouses that require up to four nutrient plus one acid stock solutions. Hydria 4+ Touch carries all the basic features of the higher Hydria Series (i.e. Hydria 5+ Touch and Hydria 8++ Touch) and the same user-friendly menu in English, accessible through a 4.7-inch (or 7-inch upon request) colour touchscreen. A fertiliser mixing tank ...
-
Manufactured by AGROinventbased in GREECE
Hydria 5+ Touch is a fertigation system designed for greenhouses with high irrigation demands. The irrigation capacity of Hydria 5+ Touch is identical to the one of Hydria 8++ Touch with only difference being its ability to manage five nutrient plus one acid stock solutions, as opposed to eight and two respectively of Hydria8++ Touch. The dual (safety) electrical conductivity (EC) and acidity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you