Pivot Irrigation Equipment For Irrigation In Europe
-
ShowcaseManufactured by AFKO Ltd. Åžti.based in TURKEY
This system consist of many spans connected to each other by mobile connection, all spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degree. Thus the pivot is suitable for rough terrain. This system irrigates from 1 hacter by one span up to 75 by 8 spans 490 m machine. ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
Linear irrigation machines travel back and forth across your field instead of around a central point as a center pivot does. A linear can move in a straight line, in forward or reverse. Their mobility makes linears one of the most efficient for ms of farm irrigation, typically irrigating 92 to 98 percent of a square or rectangular field. Linears can also assist with chemigation, fertigation, and ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
AFKO Center pivot irrigation systems main pipes: Mainly, AFKO uses several types of pipes, the ones used inside the pivot are galvanized, plugs for sprinklers with spacing of 113″. they are called main pipes as they are the main component of the pivot system, the main pipe is provided in two main lengths: ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
Enclosed collector ring to supply continuous power and signal voltage to the motors and controls on center pivot irrigation ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
This system consists of many spans connected to each other by mobile connection. All spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degrees. Thus, the pivot is suitable for rough terrain. This system irrigates from 1 hectare by one span up to 100 by 100 spans 560 m machine. ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
The tower box is made up of white, heavy-wall UV stabilized thermoplastic with a galvanized steel base. It has a steel camshaft and adjustable, moisture-resistant directional micros features. The rigid base and oversized cam spring enhance machine alignment characteristics to reduce structural ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
The AFKO Gearbox is designed and built to operate under today's most demanding growth conditions. There is a stronger, heavier worm gear pre-loaded worm gear and our new patented shaft seals that keep oil entering and problems out. The heavy-duty bronze bull gear is an option available for extreme applications. Designed to cater for longest day lengths. Each component is designed to deliver the ...
-
Manufactured by Vermeerbased in USA
When you need a mower conditioner so that you can cure hay rapidly, Vermeer is the brand to buy. The MC840 DiscPro steel roller conditioner or spring-steel paddles were designed with the features farmers need. From the patented DynaGuard swing-back suspension to our exclusive Quick-Clip Blade Retention System, the cost-efficient side-pull MC840 crimps or crushes as it cuts 10'6'/3.2 m widths of ...
-
Manufactured by Berthoud Agricole SASbased in FRANCE
TENOR, the new trailed sprayer, is designed to meet the requirements of the future. Safe and easy to operate, greater productivity, ergonomics, ecofriendliness and best spraying practice – nothing has been overlooked in the design of this new machine. New lines, rounded shape, high-performance features in a sprayer which is fully equipped/fully integrated for unmatchable operating ease and ...
-
Manufactured by LASTEC LLCbased in UNITED KINGDOM
Lastec started the articulating mower industry and set the standard by which all articulating mowers are now measured. Following the contours of rolling terrain , these high quality, durable decks are designed specifically for John Deere 1565/1570/1580 traction ...
-
Manufactured by Pierce Corporationbased in USA
PIERCE’s latest CP600 model is a system designed to adapt to a variety of weather, crop and field conditions, all the while providing maximum performance as it relates to water efficiency and increased crop yields, year after year. PIERCE-CP600 can be configured with a variety of span lengths, overhang combinations and multiple sprinkler packages. In addition, and depending on your ...
-
Manufactured by Otech S.A.S.based in FRANCE
Compact pyramidal structure in galvanized steel with two belts on each side in 4 mm thick pipe, this structure reduces the volume of concrete slab to preserve more cultivated surface. Sealing by rotating connection on vertical pipe provided by lip seal at low pressures. Device without need of electricity, one span maximum in ST127 length 56 m or 62 m with an overhang of 24 m or 30 m. Flow rate to ...
-
Manufactured by Valley Irrigationbased in USA
Everyone is worried about their budget – that’s a given! The good news is we offer the Valley® 7000 series center pivot that is both easy on your pocketbook and perfect for your field. Our 7000 series pivot is second only to the industry-leading 8000 series for reliability, durability, and overall ...
-
Manufactured by RST Irrigation Ltdbased in UNITED KINGDOM
Linear Irrigation has once again shown to be successful as an improved method of crop irrigation, giving accuracy of application and economical use of water and manpower. Options in either Centre Pivot or Linear mode can be used and full automation is also available. New in 2001 was the Omega cart which has the ability to call the operator on his mobile ‘phone, should the linear stop for ...
-
Manufactured by IRRIMEC s.r.l.based in ITALY
Reticulated pivoting structure made in alluminium and hot galvanised stell, with telescopic closing. A special roll system ensures a perfect balancing and sef-levelling to the BOOM even in the presence of the wind. Unique in its kind. The trolley is made in hot galvanised steel. Its duly dimensioned frame makes it possible to vary the track according to cultivations. The 3-point coupling for the ...
-
Manufactured by Otech S.A.S.based in FRANCE
Galvanised steel pyramidal structure with four belts on either side with 4 mm thick pipe. Watertightness through swivel on vertical pipe guaranteed by low pressure lip ...
-
Manufactured by PM Groupbased in TURKEY
Stnd. length: 100 Mt/328 Ft. Per Coil (Special order for longer lengths). Temp. range: -20 to + 70°C. When Temperature is -15°C and Colder, please DO NOT Handle or Transport Hoses. Construction: 3-Ply Polyester Yarns. Both tube and cover are extruded simultaneously to obtain maximum bonding. caution: For liability purposes, if temperature exceeds 45°C the working pressure will go ...
-
Manufactured by AGROCONSULT LLCbased in BULGARIA
AGROCONSULT supplies and installs products of the U.S.-based company Lindsay Corporation. All irrigation systems are using the patented “Zimmatic” structure which provides reliability and durability of equipment. The models offered ...
-
Manufactured by RKD Irrigacion S.L.based in SPAIN
This works similarly to the center pivot, but it can be transported automatically in order to irrigate 2, 3, or more positions, providing a high increase of irrigation area with only one machine. This is a self-propelled system and neither a tractor nor any other kind of machine is needed to change its position. It moves sideways, and may be guided with alignment performed by means of a furrow or ...
-
Manufactured by Scova Engineering S.p.Abased in ITALY
Best branded engines and pumps such as IVECO. DEUTZ, JOHN DEERE, PERKINS, ROVATTI. CAPRARI, LAND1NI coupled with flexible joints. Control panel to manage both the engine and the pump. Bended sheet iron trolley with built in tank welded by robots in order to have the best ration between dimension and fuel tank capacity. Removable drawbar and wheels axle shaft, mechanical stabilizers. Water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you