Agricultural Industry Equipment In Bulgaria
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The kit comprises an SM150T* Soil Moisture Sensor, a dedicated HH150 Moisture Meter and a carry case. The cable and connector are watertight – an essential requirement for potentially wet environments. The HH150 Meter displays volumetric water content (% volume). Please note that although the SM150T Sensor has a built-in temperature sensor, the HH150 Moisture Meter does not measure or ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The SunScan Canopy Analysis System uses field measurements of Photosynthetically Active Radiation (PAR) in crop canopies to provide valuable information about Leaf Area Index (LAI) and biomass production. The SunScan canopy analyser is optimised for low regular canopies such as most agricultural crops. The 1m probe enables rapid spatial averaging of large areas and PAR mapping for non-uniform ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
-
PremiumManufactured by AMS, Inc.based in USA
Hay & Forage Probes are ideal for obtaining 12" or 24" representative core samples for quick visual inspection and laboratory analysis. They use a 7/8" outer dimension heat-treated serrated tip and chamfered extraction slot. For best results, the sampler should be emptied with the extraction tool after each core has been taken. This will eliminate unnecessary compaction and will provide a ...
-
PremiumManufactured by AMS, Inc.based in USA
Regular Soil Probes are used without liners and have sample window in the body for easy sample recovery. They come with a 10" corrosion-resistant Cross Handle, and some include the Regular Slide Hammer. They are also compatible with the Hammer Head Cross Handle. They resist bending and twisting, and they are made of chromoly, nickel-plated chromoly, powder coated chromoly, or stainless ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The recently upgraded WinDIAS 3 Leaf Image Analysis System provides fast, accurate measurement of leaf area and leaf features – making it ideal for plant pathology and phenotyping applications. WinDIAS’s analysis features are well suited to applications where precise colour discrimination is critical. Delta-T Devices was one of the first companies to develop leaf imaging technology ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The DL6 is a dedicated data logger optimised for use with Delta-T soil moisture sensors. It can be used with combinations of ThetaProbes, SM150 Soil Moisture Sensors, SM300 Soil Moisture Sensors and Profile Probes, and also accepts rain gauge and soil temperature probe inputs. Up to 16000 readings can be stored in ...
-
PremiumManufactured by AMS, Inc.based in USA
1" X 13-3/4" Plastic Liner. A specially threaded top cap allows the liner to protrude 1-3/4" from the top of the probe body for easy removal without handling or disturbing the sample. The Reach-&-Grab removal system helps improve the integrity of your ...
-
PremiumManufactured by AMS, Inc.based in USA
Open End Soil Probes collect shallow samples that are 15” in length. They are primarily used for agricultural applications. The Soil Probe body is made from nickel-plated chromoly. The 15" slot in the Soil Probe is cut to the end of the probe body to facilitate emptying of the sample. It includes a 10" Cross ...
-
PremiumManufactured by AMS, Inc.based in USA
Open End Soil Probes allow you to take shallow samples and are primarily used in agricultural applications. The AMS open end soil probe collects a 1" diameter sample that is about 15" long. The probe is made of nickel-plated, 4130 chrome molybdenum steel. The slot in the cylinder is cut all the way through the end of the probe to facilitate emptying of the soil sample. The open end soil probe ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2-3/4" X 3' One-Piece Combination Edelman Auger is capable of augering down to 3'. The attached 16" Rubber-Gripped Cross Handle is welded to the steel shaft which is also welded to an Eijkelkamp Combination Edelman Auger Head. It is versatile, lightweight, and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The One-Piece Combination Edelman ...
-
PremiumManufactured by AMS, Inc.based in USA
Save your back with the AMS Sure-Lock soil probe handle. Take samples up to 36" deep. Hand-crafted from 1018 steel which has been gold-zinc plated for added rust resistance. The handle height stays at the same level the entire time you're sampling which eliminates back strain. The hand-activated lever allows you to adjust the length of your extension rod. The Sure-Lock system eliminates the ...
-
PremiumManufactured by AMS, Inc.based in USA
The EZ Eject Soil Probe is not recommended for sticky soil conditions. This unique Soil Probe ejects soil samples quickly and efficiently. Each Soil Probe has its own internal piston with side handle. This built-in hand plunger allows you to eject the entire soil sample from the sample window and even through the tip of the Soil Probe. Twist the side handle clockwise to lock the piston in place. ...
-
Manufactured by Garmachbased in POLAND
Garlic planter is a simple to use completely mechanical machine designed for small and medium-sized ...
-
Manufactured by Garmachbased in POLAND
Potato planter is two-rows planter mounted on the three point suspension system of tractor. The planter is mounted on the tractor with three point suspension system, CAT 2. During single cycle all the activities concerning with potato planting are performed (it makes furrows, automatically seeds the potatoes and ridges the seeded plants with soil). Potatoes can be planted in the interrows 62.5 / ...
-
Manufactured by Milkotronic Ltd.based in BULGARIA
User-friendly ultrasonic milk analyzer: simple in operation, maintenance, calibration and installation; Designed for use in Laboratories and Milk Collection Centers; Integrated 7" fully functional display; Ultrasonic ...
-
Manufactured by LIMK Ltd.based in BULGARIA
Length – 1.90 m; Height – 1.10 m; Thickness of the divider – 2 '' ...
-
Manufactured by PigTek Pig Equipment Group - a division of CTB, Inc.based in USA
Efficient management is critical for the pig farms of the future. Managers need high quality, next-generation technology supported by field-proven software and hardware solutions as well as options for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you